Provision for ACDB Fixing and 25 nos. of AC point fixing with wiring in the class room and different laboratories of SBS building

Supplying and fixing of following 12 ways surface/ recess mounting, vertical type, 415 V, MCCB, VTPN distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs with MCCB as incomerand SP/TP MCB as outgoing, as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Flush Mounting and Surface Mounting type- • With 250 A Copper Busbar for each phase • With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management • Fully insulated busbar & shrouded Neutral bars • Improved Pan assembly for ease of installation • Prefitted masking sheet • IP 30 With provision for DPX³ 160 MCCB or equivalent, as incomer and SP/TP MCB's as outgoing Incomer - 1 no. 125 Amp 25KA 4pole MCCB with Thermal Magnetic Protection Unit (Ics=100%Icu, Option for In built or add on module for Earth Leakage Protection- - Adjustable sensitivity: 0.03 - 0.3 - 1 - 3 A - Adjustable tripping: 0 - 0.3 - 1 - 3s) Out going- 10 nos. of 32 Amp 10KA, TP MCB, D curve, AC MCB Make- Legrand/Schneider/Seimens/Havells/Hager

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door Make: Legrand/Hager/Schnieder

Supplying and fixing following rating, four pole, 415 V,4pole 10KA D curve MCB in the existing MCB DB complete with connections, testing and commissioning etc. as required. 4pole 63 Amp, D curve AC MCB Make: Legrand/Hager/Schnieder

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 25 Amp SP MCB C curve. Make: Legrand/Hager/Schnieder

Supplying and fixing TPN sheet steel enclosure on surface/ recess along with 25 Amp/32 Amp, 415 volts, 30mA RCCB complete with connections, testing and commissioning etc. as required. Make: Legrand/Hager/Schnieder

Supplying and fixing 25 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 25 A DP RCCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make: Legrand/Hager/Schnieder

Supply, Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on surface with G.I earthing wsire for earthing etc as required. 3.5Cx50 Sq MM AL Armoured XLPE Cable Make: Polycab/Finolex/RR Kabel

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5Cx50 sqmm AL XLPE Armoured Cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5Cx35 sqmm AL XLPE Armoured Cable

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (AC's wiring and Sub-main ckt wiring for Fan Light) Cable: 4 X 4 sq. mm + 2X 4 sq. mm earth wire Make: Make: Polycab/Finolex/RR Kabel

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. (AC's wiring and Sub-main ckt wiring for Fan Light) Cable: 2 X 4 sq. mm + 1X 4 sq. mm earth wire Make: Make: Polycab/Finolex/RR Kabel

Numbering of Power points/ DB/ceiling fan/ exhaust fan/ fittings etc. with one sided adhesive sticker as required.

M/S DEEPANA ELECTRICALS & CONSULTANCY

NAMAH SHIVAYA ENTERPRISE