PROVIDING & LAYING OF RCC NP3/NP4 CLASS PIPE SEWERAGE NETWORK FOR NEWLY ADDED AREA SANIYA HEMAD UNDER DRAINAGE ZONE OF EAST ZONE-A (VARACHHA).

NAME OF WORK: PROVIDING & LAYING OF RCC NP3/NP4 CLASS PIPE SEWERAGE

NETWORK FOR NEWLY ADDED AREA SANIYA HEMAD UNDER

DRAINAGE ZONE OF EAST ZONE-A (VARACHHA).

Tender Notice Online No: DMC/Drainage/11/2025-26 (Work No. 03)

VOLUME-II: PRICE BID

Last date of download of tender : 27/02/2026 to 25/03/2026.

documents from website

smctender.nprocure.com

Pre-bid query : Bidders shall have to post their queries on e-mail

address [email protected] on or

before Date:09/03/2026

Last date of submission of online : Up to 25/03/2026, up to 18:00 hrs.

Last date of submission of tender : From 27/03/2026 to 09/04/2026 to Chief

fees, EMD and other documents in Accountant SMC, Muglisarai, Surat by

hard copy (as mentioned in R.P.A.C./Speed Post up to 17:00 hrs.

Tender Document)

Estimated Cost : Rs.

Earnest Money Deposit (EMD) : Rs.

50% shall be in the form of crossed Demand Draft

of Nationalised Bank payable at Surat and

remaining 50% shall be in the form of Bank

Guarantee of Nationalised Bank (encashable at

Surat) or 100% EMD amount shall be in form of

crossed Demand Draft of Nationalised Bank

payable at Surat

Document Fees : Rs. 21,240.00 (Incl. CGST 9% and SGST 9%)

Opening of Tender (Online) : From 27/03/2026 ,10.30 Hrs. onwards. If possible

Tender to be submitted to:

The Chief Accountant,

Surat Municipal Corporation,

Muglisarai, Surat – 395

1. NAME OF WORK

PROVIDING & LAYING OF RCC NP3/NP4 CLASS PIPE SEWERAGE NETWORK FOR

NEWLY ADDED AREA SANIYA HEMAD UNDER DRAINAGE ZONE OF EAST ZONE-

1) ESTIMATED COST OF CAPITAL WORK: Rs. 13,36,32,037.46 (Excluding

(Thirteen lakh Thirty Six Thousand Thirty Two Hundred Thirty-Seven Rupees and

Forty Six paisa only.)

TENDERER’S BID FOR EXECUTION OF CAPITAL WORK:

PERCENTAGE HIGHER / BELOW OF Rs. 13,36,32,037.46 (Excluding GST)

TENDER AMOUNT (IN FIGURES): Rs. __________________

TENDER AMOUNT (in WORDS): Rs. __________________

Rate Quoted by bidder shall be inclusive of all taxes but Excluding GST. GST shall

be paid extra as per prevailing rules.

SIGNATURE AND SEAL OF THE CONTRACTOR:

NAME AND ADDRESS:

SIGNATURE OF WITNESS:

NAME AND ADDRESS:

2. SCHEDULE – B

SR. RATE AMOUNT

ITEMS QTTY. PER

Excavation for pipe line trenches for water supply,

sewerage line, machine hole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and

stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and

strata as specified.

In hard murrum, boulders incl. macadam road. 7461.00 155.25 C.M.

Excavation in bituminous road as per required

gradient and line including safety provisions using site

rails and stacking excavated stuff including up to all

required lead cleaning the site etc. complete for all lifts

Excavation in Bituminous road 7461.00 288.65 C.M.

Excavation for pipe line trenches for water supply,

sewerage line, machine hole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and

stacking excavated stuff including up to all required

leadcleaning the site etc. complete for all lifts and

strata as specified.

In C.C. Road 1865.25 427.80 C.M.

Excavation for pipe line trenches for water supply,

sewerage line, machine hole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and

stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and

strata as specified.

In all sorts of soil and soft murrum

(A) Upto 1.5 Mt. dpt.from G.L. 125420.00 102.35 C.M.

Providing cutting of existing bituminous surface up to

suitable depth in line and alignment using

Mechnically operated cutter machine before

excavating existing surface for utility laying including

cost of all type of machinery, fuel, labour etc. and as

per direction of engineer incharge.

SR. RATE AMOUNT

ITEMS QTTY. PER

Supplying & Filling with fine sand in compacted

thickness over the base including watering ramming,

consolidating & dressing etc. complete. Item includes 5910.00 329.00 C.M.

by using vibratory plates compacted machine and as

directed by engineer in charge

Providing and supplying ISI Standard R.C.C. pipes in

standard lengths of following class and diameter

suitable for rubber ring joints including all taxes,

insurance, transportation,freight charges, octroi,

inspection charges, loading, unloading, conveyance to

departmental stores, stacking etc. One rubber ring

should be supplied with each full length socketed pipe,

cost included in rates below.

Lowering, laying and jointing of following diameters

in proper position, grade and alignment at all level as

directed by Engineer-in-charge including conveyance

from stores to site of work, labour, giving hydraulic

testing as per IS code.

(D1) 250 mm dia (NP3 Class) 2748.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 273.00 868.55 Rmt.

(E1) 300 mm dia (NP3 Class) 2675.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 205.00 1223.85 Rmt.

(F1) 350 mm dia (NP3 Class) 1516.00 1031.95 Rmt.

(F2) 350 mm dia (NP4 Class) 224.00 1531.95 Rmt.

(G1) 400 mm dia (NP3 Class) 414.00 1324.80 Rmt.

(G2) 400 mm dia (NP4 Class) 350.00 2047.80 Rmt.

(H1) 450 mm dia (NP3 Class) 682.00 1557.65 Rmt.

(H2) 450 mm dia (NP4 Class) 106.00 2375.65 Rmt.

(I1) 500 mm dia (NP3 Class) 1972.00 1702.35 Rmt.

(I2) 500 mm dia (NP4 Class) 527.00 2554.35 Rmt.

(J1) 600 mm dia (NP3 Class) 1548.00 2208.20 Rmt.

(J2) 600 mm dia (NP4 Class) 548.00 3256.20 Rmt.

(K1) 700 mm dia (NP3 Class) 442.00 3205.20 Rmt.

(K2) 700 mm dia (NP4 Class) 239.00 4208.20 Rmt.

SR. RATE AMOUNT

ITEMS QTTY. PER

(L1) 800 mm dia (NP3 Class) 0.00 3522.30 Rmt. -

(L2) 800 mm dia (NP4 Class) 1357.00 5922.30 Rmt.

(M1) 900 mm dia (NP3 Class) 0.00 3992.00 Rmt. -

(M2) 900 mm dia (NP4 Class) 87.00 7029.00 Rmt.

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt. -

(N2) 1000 mm dia (NP4 Class) 329.00 8713.25 Rmt.

(O1) 1100 mm dia (NP3 Class) 0.00 5533.35 Rmt. -

(O2) 1100 mm dia (NP4 Class) 0.00 9141.35 Rmt. -

(P1) 1200 mm dia (NP3 Class) 0.00 6405.00 Rmt. -

(P2) 1200 mm dia (NP4 Class) 95.00 10210.00 Rmt.

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt. -

(Q2) 1400 mm dia (NP4 Class) 0.00 14801.10 Rmt. -

(R1) 1600 mm dia (NP3 Class) 0.00 11830.55 Rmt. -

(R2) 1600 mm dia (NP4 Class) 0.00 18365.55 Rmt. -

(S1) 1800 mm dia (NP3 Class) 0.00 14355.50 Rmt. -

(S2) 1800 mm dia (NP4 Class) 0.00 20002.50 Rmt. -

(T1) 2000 mm dia (NP3 Class) 0.00 16880.45 Rmt. -

(T2) 2000 mm dia (NP4 Class) 0.00 21718.45 Rmt. -

(U1) 2200 mm dia (NP3 Class) 0.00 19405.40 Rmt. -

(U2) 2200 mm dia (NP4 Class) 0.00 23434.40 Rmt. -

Providing and constructing Sewer machineholes,

scraper machineholes and unit house connection

chamber, as per the type design in brickmasonry in C.

M. 1:5 and inside and outside 20mm thick plastering

in C. M. 1:3 necessary 100 mm coping with

reinforcement in R.C.C.M.200 fixing C. I. steps and

fixing machinehole frame and covers (But excluding

supply of machinehole frame and covers) over

SR. RATE AMOUNT

ITEMS QTTY. PER

machineholes and house connection chambers and

fixing machinehole covers (but excluding supplying

of machinehole covers) over scraper machinehole etc.

complete,providing and fixing safety chain wherever

necessary as per the stipulations in the type design

complete as per latest CPHEEO manual.(excl.

TYPE-A 1200 mm DIA

(Add or Deduct Rs.662.8 per -

0.10 Mt.Depthincrease or

TYPE- B 1500 mm DIA

(Add or Deduct Rs.1231.3 per

0.10 Mt.Depthincrease or

SR. RATE AMOUNT

ITEMS QTTY. PER

TYPE-C 1500 mm DIA

(Add or Deduct Rs.1878.6 per

0.10 Mt.Depthincrease or

TYPE-D1 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2211.00 per -

0.10 Mt.Depthincrease or

TYPE-D2 1500 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2212.10 per

0.10 Mt.Depthincrease or

TYPE-D3 1900 mm DIA

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.2601.50 per

0.10 Mt.Depthincrease or

TYPE - S-1 (RECT.)

SR. RATE AMOUNT

ITEMS QTTY. PER

SR. RATE AMOUNT

ITEMS QTTY. PER

(Add or Deduct Rs.3190.70 per

0.10 M Depthincrease or

Providing and Fixing in position R.C.C. ventilating

column as per drawing

Dewatering by pumping set of required capacity

including temporary platform carting pumping at site

and fixing the same in position including all

accessories, and fuel and labour etc. complete.

Pump set of Capacity 20000.00 18.32 HP/Hr

Coloured RCC Precast Machinehole Frame & Cover

Manufacture, supply & Delivery at store or at site of

work precast RCC M-40 Grade Frame & Cover

suitable to drainage machinehole and as per type

design & drawing including cost of reinforcement

M.S. Angles or Flat, curing mold work etc

(A) For Circular machinehole (heavy duty) 540.00 2294.00 No.

(B) For Scraper machinehole. 18.00 7289.00 No.

(C) For House Connection Chamber light duty 2160.00 1733.00 No.

Providing and filling Rubble including hand packing

and filling interstices with quarry spalls behind 100.00 1064.80 C.M.

abutment and between ruturns as derected.

Shoring or timbering for trench with 50 mm thick

planks and suitable size struts etc. complete.

Refilling of pipeline trenches incl. ramming, watering,

consolidating disposal of surplus stuff as directed 137872.00 25.30 C.M.

within a radius of 3 km.

SR. RATE AMOUNT

ITEMS QTTY. PER

Providing and constructing rectangular brick masonry

chamber for house connection as per type design in

brick masonry in C. M. 1:3 including M-100 in

foundation M-150 in benching inside plastering in C.

M. 1:3 and outside plastering in C. M. 1:3 coping in

M200 and fixing RCC precast machine hole frame and

covers, but Excl. supply of machine hole and cover

etc. complete excl. excavation.

Making connection with the machine hole by boring

hole on the masonary of machine hole and jointing

pipe with cement mortar in prop. (1:2) inside as well 0.00 267.86 No. -

as outside of existing machine hole,curing

etc.complete as directed by Engineer-in-charge.

Corrugated DWC HDPE (Double Wall Corrugated

High Density Polyethylene pipes) (non-pressure

pipes)-Providing and supplying of Class SN8

Structured Wall polyethylene Piping systems (Pipe

with online/offline coupler and elastomeric sealing

ring) with non-smooth External Annular Corrugated

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage

application as per EN:13476-3 including all local and

central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

the departmental stores etc. complete.(ID Dia)

Providing and supplying in standard length ISI mark

rigid unplasticised PVC pipes suitable for potable

water with ring fit joint including cost of rings, as per

IS specification no. 4985/1988 including all local and

central taxes, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance to

the departmental stores and including cost of jointing

meterial etc. complete. 6 kg/cm2 100.00 113.25 Rmt.

Lowering, laying, fixing and jointing

PVC/uPVC/cPVC pipes and specials of following

class and diameter including cost of conveyance from

stores to site of works including cost of labour,

material, cement solvent, giving satisfactory hydraulic

testing as per ISI code.

Work of Temporary diversion of sewage by plugging

the machineholes at upstream and downstream of the

sewer stretches proposed to be replaced. The rubber

plug required for the plugging the drainage line shall

SR. RATE AMOUNT

ITEMS QTTY. PER

be procured by the contractor and the same shall be

the property of contractor.

150mm-400mm sewer line 15.00 20089.29 Nos.

450mm-600mm sewer line 15.00 20982.14 Nos.

700mm-1200mm sewer line 15.00 23660.71 Nos.

Providing & Installation of barricades incl. supplying,

painting, with flurescent paint and fixing, CGI sheets

24 SWG of 1.80 m height & M.S. posts angle 40 x

x 5 mm at 2.0 m c/c and dismantling the same after

complition of work as directed by Engineer - in -

Carting and Recarting of excavted earth from any site

to required place as per requirement and directed by

engineer in charge

Preparation of as built drawing of pipeline and

different valves laid under this work by showing

location of each and every pipe in two dimension-

horizontal and vertical with respect GIS systemalong

with invert levels of the pipeline and different valves .

The Contractor shall submit two sets of as built

drawings periodically, without which the subsequent

R.A. Bill of the work will not be processed payment

purpose. On completion of the entire work the

contractor shall submit as built drawings for the whole

work in six (6) sets along with two (2) soft copies as

directed by the Engineer-in-charge. The item includes

all required equipments, materials, man power for

execution of complete item.

Drilling of various dia Horizontal borehole for

watermain pipeline crossing under the road incl. in all

strata with required length incl providing and fixing of

various dia M.S/RCC casing pipe with pushing etc

complete for various dia without Watermain & with

Providing and Fixing of MS Casing pipe of

following diameter.

824 mm OD 12 mm thickness 50.00 22358.84 Rmt.

1028 mm OD 14 mm thickness 0.00 31065.24 Rmt. -

SR. RATE AMOUNT

ITEMS QTTY. PER

1232 mm OD 16 mm thickness 0.00 41189.38 Rmt. -

1440 mm OD 20 mm thickness 0.00 57779.51 Rmt. -

Demolition/Dismentalling RCC work or masonary

work or removing of paver block flooring in any part

inculuding stacking of serviceable/useful material and

disposal of unserviceable material with all lead and

(a) Brick masonary work/Paver block 15.00 550.40 CM

(b) RCC work 15.00 1057.47 CM

(c) Unreinforced c.c. 15.00 609.26 CM

Providing and Casting in situ mass cement concrete in

grade M10 proportion 1:3:6 (1 cement :3- coarse sand

: 6- graded stone aggregate of 40 mm nominal

size)using granite quartzite trap metal of size 12mm to

25mm including consolidation curing etc. complete

Without Formwork

Providing & construction brick work using Fly Ash

bricks having crushing strength not less than

Kg./sq.cm. in foundation & plinth in C.M. 1:6 (1

cement:6 sand ) etc. comp. Foundation and plinth

Providing & Applying 15 mm th. Cement plaster in

single coat on brick/concrete walls similar surfaces for

plastring & finished even & smooth with a floating

coat of cement slurry mixed with admixture of lime or

neeru in required proportion etc. complete in C.M. 1:3

(1 Cement : 1-sand)

Providing and laying cement concrete 1:1.5:3 (1

cement: 1.5 sand: 3 graded stone agg. 20 mm nominal

size)& curing comp. lnclud.cost of form work but

exclu. Cost of reinforcement for reinforced concrete

work in : (A) Foundation, footing, Base of columns

and Mass concrete.

Warning tape WARMAT ® Brand PE warning tape

with Anti Rodent Properties ( Con Toxic, Non

Hazardous Eco friendly ROHS Compliance & 100%

recyclable) Moc : LDPE, Roll length : 250 Mtr, Color 100.00 31.25 Rmt

: Green, Text : Black / White, Length with non

deletable high abration.

(i) Size : 300 mm width x 100 Micron thk.

Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN /

JINDAL MAKE of the following nominal bore & tube 25.00 282.18 Rmt

fittings etc. comp..-

40 mm dia 25.00 425.33 Rmt

SR. RATE AMOUNT

ITEMS QTTY. PER

65mm dia 25.00 723.83 Rmt

Providing mantaing upto the required period safe

guarding lightening the excavated trenches with

proper barricading, fencing with timer balles,

bamboos, G.I. sheets, red fiag and red lights alongwith

the provision of the chowkidars as directed by

Engineer-in-charge

Temporary diversion of sewage from House

connection chambers, Intermediate machineholes and

Tee chambers through 150 mm dia corrugated Hose

pipe supported at suitable distances from the side and

conveying the sewage by gravity to the downstream

Providing & construction simple chamber of 23 cm.

th' B.B. Masonary in C.M 1:5 with cement plaster

mm th' in C.M. 1:3 inside & outside to exposed faces,

R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

Grade stone aggregate 20mm size) ,Foundation

concrete 1:5:10 & fixing C.I. cover with frame to be

not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single

(A) Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt beyoung

Removing of existing pipeline incl. removal of

specials, valves jointing material including carting

and stacking of removed material from site of work

to the department store as directed excl. excavation

Providing and casting in situ C.C. in grade M-15

(approx. corresp. to prop. 1:2:4) (proportions as per

mix design or as per Table 9 of IS456 2000 in masses 5.00 4906.00 Cum

by weigh batching ) using granite, quartzite trap metal

of size 6 mm to 20 mm for RCC work, including

SR. RATE AMOUNT

ITEMS QTTY. PER

scaffolding centering, form work, needle vibrated

consolidation, curing comp. up to 6 meter depth or

height (excluding cost of reinforcement and neat

finishing) with centering and shuttering/deshuttering

etc. comp. for the thrust block inclg. cost of form

work. With Formwork

Providing and casting in situ C.C. in grade M-20

(proportions as per mix design or as per table9 of

IS456 2000 in masses by weigh batching ) using

granite, quartzite trap metal of size 6 mm to 20 mm for

RCC work, including scaffolding centering,

formwork, needle vibrated consolidation, curing

complete up to 6 meter depth or height (excluding cost

of reinforcement and neat finishing) with centering

and shuttering/deshuttering etc. complete for structure

other than water retaining (Below G.L)

Providing and cast in situ C.C. in grade M-30

proportions of ingredients as per mix design by weigh

batching using granite, quartzite trap metal of size

mm to 20 mm and or 6 mm to 12 mm including

scaffolding centering formwork, needle vibrated

consolidation, curing and hydraulic testing etc.

complete (excluding cost of reinforcement) with

centering and shuttering/deshuttering etc. comp. up to

6 meter height /depth Av. G.L.for all water retaining

( A )Bottom base slab 5.00 6905.00 Cum

( B )VerticalWall/kerb (Th. Above 25 CM) 10.00 8083.00 Cum

(C) Column 5.00 9317.00 Cum

(D) Beam 5.00 8486.00 Cum

(E) Slab 5.00 8213.00 Cum

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint (A) in beams

& joists channels angles, tees, flats with connection 5.00 9047.86 Quintal

plates or angle cleats as in main & cross beams,hip &

trussed purlins connected to common raffers & the

Providing, Laying and jointing on true line and level

UPVC pipe (SCH-40) line of

Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

including fittings make or equivalent as approved by

angineer-in-charge. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

15 mm Dia 25.00 72.65 Rmt

25 mm Dia 25.00 91.84 Rmt

SR. RATE AMOUNT

ITEMS QTTY. PER

40 mm Dia 25.00 148.12 Rmt

50 mm Dia 25.00 195.67 Rmt

Supplying cutting, bending, binding and placing in

position steel as per plan and design and as per ISS

2502 including cost of steel and binding wire for

reservoirs / structures only including lift upto 6 mt.

height or depth below G.L. for all diameters.

Thermo mechanically trated (TMT) bars Fe-500 grade

for all diameters.

Providing interlocking type Rubber moulded cement

concrete paver block of approved shape, design &

colour having 60mm thickness (M-35) purchased

from SMC's approved paverblock manufacturer only

& fixing of fine sand bedding. Item includes levelling 10.00 524.00 Sqm

by using vibratory plates compacted machine. Item

also includes all materials, labour, equipments, tools,

plants, watering, cleaning etc. complete.

(Without colour)

Providing constructing brick masonry inlet chamber

of 750 x 600 x 1500 mm internal dimension with

necessary excavation refilling 350 mm thick brick

masonary in CM 1:4, 150 mm thick PCC and benching

in CC 1:2:4, 12 mm thick plaster in CM 1:3 for inside

and cement pointing in CM 1:3 for outside, providing

and fixing pre-cast RCC frame and cover of M-30

grade as per drawing and specifications - Rate for

m depth. Add or ded. Rs. 701 for every 10 cm increase

or decrease in depth

Providing, Supplying and fixing brass ferrule of

approved make of following sizes inclusive all taxes,

insurance, transportion, fright charge, inspection

charge etc. complete

TOTAL AMOUNT Rs.

TOTAL AMOUNT Rs.