Building

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls.GF

Dismantling of Brick Masonry in cement mortar, Clearing away from site and carefully stacked useful materials for reuse. Inluding cost and conveyance of all materials all labour charges etc.,complete for finished item of work.GF

Plastering to even surfaces of wall with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) GROUND FLOOR

Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) Ground Floor

Dadooing to walls with with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in Ground Floor

Providing and fixing 28 -30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame Ground Floor

Providing and fixing factory made solid Wood polymer Composite (WPC) Single extruded Door frame Section of size 45x75mm. The two vertical members are to be joined togather with thehorizontal member using 8x50mm long MS Star full thread screw to be used reverse forward speed control hand drilling machine. The Ready/Assembled door frame is fixed to the wall using hold fast or bolt fasteners.A minimum of 4no's of screws to be provided for each vertical member & minimum 2no's for Horizontal member with encapsulation of 8mm rigid layer on the six surfaces. The Door frame will have a rebat of 32mm complete for finished item of work

Supply and fixing of Door size 1.20 x 2.10 M Double Leaf with Door Frame of Sal wood Section 100 mm x 75 mm along with Double flush door shutters solid bond wood block board type with commercial ply on both faces 35mm thick including fixtures such as Hardware fixtures ie., MSPC Butt Hinges 125mm Long 6 nos, MSPC Handles 125 mm Long 2 Nos, MSPC Tower Bolt 150mm long 2 Nos, MSPC Aldrop 300 mm long 1 no, MS Hold Fast 6 Nos and Heavy Duty Door Stopper 2 Nos., including Including Labour charges for making of door, fixing of fixtures etc., and cost and conveyance of all materials to site, taxes extra for finished item of work

Providing & Fixing of Openable Windows with Fly-mesh made of pre-painted steel (Base Steel as per IS 513 of 0.58mm thick galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72 x 55mm, centre mullion of 72 x 50mm, section for fixed glass beading section of 12 x 12 mm and section for shutters of 48 x 25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20 mm provision for guard bars/grills and fly mesh shutter section of 20 x 40 mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws,including 10mm Square guard bars with 6” (152.4mm) pitch , complete for finished item of work For Double shutter Window with vertical mullion of Size 3'0''x4'0'' ( 914.4mm x 1219.2mm) OR Size 4'0''x4'0'' ( 1219.2mm x 1219.2mm)

Painting to New External Walls with two coats of Polymer Plastic Emulsion paint of Asian / Berger / Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for external Walls.(APSS No. 911)

Painting to New Internal Walls with two coats of acrylic emulsion paint exterior grade-2 with silicon additives having VOC (Volatile Organic Compound )content less than 50 grams/ liter of Asian / Berger /Nerolac / Saicoat / Endocem or equalent quality of approved brand and shade as approved by the Engineer - in - Charge over base coat of cement primer water base grade -II exterior making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Internal Walls.(APSS No. 911)

Providing and application of one coat of High Solid, Cold applied Acrylic Elastomeric Liquid Membrane Coating / diluting with water at 1 : 0.50 ratio as a primer coat at a consumption of 200ml per Sqm. b). Providing and laying of Non woven polyster reinforced fibre mesh of 40 GSM, with 1 Mtr width and 50mm overlap on the primed surface. c) Providing and application of one coat of High strength cellulose fibre reinforced Acrylic Elastomeric Liquid Membrane coating with diluting with water at 20% as a base coat application at a consumption of 400ml per Sqm for moistured walls

Brick Masonry in superstructure with CM (1:6) prop with Flyash Cement solid blocks of size 290 x 200 x 140 mm, for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust with a compresive strength not lessthan 50 kg/sqm including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., for Superstructure Walls FIRST FLOOR

Plastering to even surfaces of wall with CM (1:5) Prop: 20mm thick in single coat including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental charges and labour charges such as mixing mortar, finishing, curing, etc., complete for finished item of work. (APSS 901,906) FIRST FLOOR

Reinforced Cement Concrete M25 Grade corresponding to IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content @ 380Kgs/Cum from standard suppliers approved by the department including centering, shuttering, laying concrete, curing etc. complete for Lintels 1ST FLOOR

Providing High Yield Strength Deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, laour charges such as cutting, bending placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in First floor. (APSS No.126)

Flooring with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, screened sand , water and tiles etc., and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707) First Floor

Dadooing to walls with with non-skid full body ceramic floor tiles of size 300mm x 300mm and thickness between 7 - 8mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Part 1 to 15) of any colour and finish in all shades and designs as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, etc. to site, seigniorage charges, sales and other taxes on all materials, and all opertional, incidental and all labour charges such as mixing of cement mortar, laying in position, curing, lift charges etc., complete for finished item of work in First Floor

Wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR PVC insulated 110V grade Copper Cable in the existing metallic / non-metallic conduct pipe with 6A / 10A 1 Way 1 Module Modular Switch, Celling rose and 8 Modular Horizontal / Vertical Cover Frame covering to switck control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Building.

Supply and fixing of 6A / 10A 3/2 pin 2 module modular socket with shutter with 6A / 10A 1way 1 module modular switch control on a common switch board with 3 module hot dip galvanized modular metal box covered with 3 modular cover frame with earth continuity including wire leads, earth connections along with all labour charges etc., complete Modular Switch, Socket, Metal Box & Cover frame Make: GM Four-Five/ Legrand Arteor / Schneider Zen celo / MK Blenge

Supplying and fixing of 16A/6A 1 way Combi Socket Modular Socket with shutter and 16A switch control 5 in 1 on decolam sheet covered board including earth connection and all labour charges etc., complete.

Supplying and Run of 2 of 36 / 0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 14/3.0mm (1.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supplying and Run of 2 of 56 / 0.3mm (4.0 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for mains/circuits/MV Lamps/Security light points and one run of 36/0.3mm (2.5 Sqmm) FRLS / HFFR PVC insulated 1100V grade Copper cable for earthing in existing conduit pipe, including cost and conveyance of all materials and all labour charges etc., complete. (Phase, Neutral and earth)

Supply and fixing of Batten Holder/Slanting holder in lieu of ceiling rose of light point complete with allconnetions and all labour charges with 40Watt bulb etc., complete for new installation. Anchor Make

Supply and fixing of 20W,1900 lumens T8,not less than 1100mm length LED retrofit tube light with aluminium anodised body, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, .etc., complete as per IS 10322 (Part 5/ Sec 1)..2012 Makes : As per list of recommended brands as category II. SSR

Supply of 48" (1200mm) Sweep 5 star rated BLDC (Brush less Direct Current) Ceiling Fan with double ball bearings, input voltage 230V AC converted to 24 V DC, power input not more than 30W, air delivery not less than 220 cubic meter/min and a minimum service value of 7.0, with remote and without Regulator. Makes: As per list of recommended brands.ELEC- 5.1.1.

Supplying and erecting 2 Module Modular type Electronic step type Fan Regulator for ceilling fans 900/1200/1400mm sweep complete erected on existing board including cost and conveyance of all materials and all labour charges etc., complete.

Supply and fixing of 8 way SPN type distribution board with IP-30 protection of make Standard / Havells suitable for single phase 40A DP isolator and 6 Nos. 6-32 A MCB's make Standard / Havells as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Proving Independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in data, using 40mm dia 'B' class GI Pipe of 2.5m length with necessary accessories duly providing 12mm dia 16Nos. Holes and rewired bolts, nuts and washers, checknuts, Humes pipe ring etc., as per IS specifications with necessary double GI earth wire No.8 SWG including filling with equal preparation of salt and charcoal in layers and all labour charges etc., complete.

Supply and Run of 2 of 10 Sq.mm WPSC ISI Aluminium wire of makes Finolex / GM/ million /Payal/ V-Guard/ Nakoda / Gold Medal / HPL/RPG/ Nandicab along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Providing & Placing on Terrace ( at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Supply and fixing of Ashirvad/ Ajay/Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D-2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for 28.60mm OD Pipe-SDR 13.5.

Supply and fixing of 22.20MM Ashirvad/ Ajay/Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D-2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical properties for Hot and Cold Water (IS 15778:2007) including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for 22.20 mm OD Pipe-SDR 13.5.

Supplying & fixing tested gun metal peet valve of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - make or equivalent screwed type 1st quality of approved type including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. 32 mm

Supplying & fixing tested gun metal peet valve of Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - make or equivalent screwed type 1st quality of approved type including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors. 65 mm

Constructing 457.2mmx457.2mm (1'-6"x1'-6") brick masonry in CM (1;6) prop Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mmx457.2mm (1'-6"x1'-6") C.I.frame and cover 20kg including cost cononveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).

Supplying and fixing of single socket PVC/SWR pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of worl at all floor levels (APSS No.1302 1319 & 1326) 75mm dia for Waste Water

Supplying and fixing of single socket PVC/SWR pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of worl at all floor levels (APSS No.1302 1319 & 1326) 110mm dia for Solid Waste

Supplying and fixing of bib cock cum health faucet with 1 m long flexible tube and wall hook with 7 years warranty Chrome plated including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing, sales and other taxes on all materials etc., complete for finished item of work. (A.P.S.S. No. 1325).

Supplying & fixing 150 mm x 100 mm SWG gully traps of ISI make conforming to ISI 651 & 4127 with C.I Grating & Constg. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover of standard make as directed, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326)

Supplying & fixing CI Nahani traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice 100 mm dia Inlet- 75 mm (3") outlet pipe - 4 Kgs with N.P. Cover for all floors, including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. (APSS No 1326) for All Floors.

Supplying & Fixing 550 x 400 mm Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore single Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso/Nice/Senior or equivalent complete with standard CI brackets including wooden block, 12.7mm PVC connection with Brass union nut CP coated, 12.7mm dia first qualifty NP angle stop cock, 38.1mm CP waste coupling , 31.75mm dia PVC flexible waste pipe of 914.4mm length of first quality including cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work. for All Floors.

Supplying & Fixing European W.C 1st quality ISI marked conforming to IS:2556-Part-2-1973 of Hindware/ Parryware/ Neycer - make white glzes with ‘S’ trap,supplying and fixing best Indian make plastic seat and lid for Europen water closets with rubber or plastic Buffers as per IS2548-1996 and 10 liters capacity single flush PVC low level cistern Parryware or equivalent with internal components and CPshort bend and fixed using required size of nails and screws,12mm PVC connections with brass union nuts CPcoated and 12.70mm dia.NPbib tap 400grams Seiko or equivalent including cost and conveyance of all matrials to site, Overheads & Contractors profit etc., complete for finished item of work for all floors.

Suppplying and fixing white glazed flat back Bowl / Half Stall Urinals of size 440 mm x 265 mm x315 mm 1st quality confirming to IS-2556-1995, fixed with screws of Indian make (HSW/Parry/Neycer) complete for finished item of work for all floors

Supply and Transportation of 3HP, 5 to 10 Stage,5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding,Pump shall be suitable for various delivery head and discharge with stainless steel shaft.Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply,etc complete for 6" Bore well. Makes : As per list of recommended brands as category I.

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor 2 to 3HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including supply and fixing of DOL starter of make C&S/LTLK/ Seimens/BCH /KSP(Karunya) /Crompton. complete.

Supply of 3 Core 4.0 Sqmm Flat Copper cable of ISI for Submersible Motors confirming to IS:694:1990. Makes: Finolex / RR Kabel/ Polycab / Havells / KEI/Gloster/ Goldmedal/GM

Supplying & Fixing N.P soap dish heavy type of approved make ISIquality with NPscrews etc.,complete including cost and conveyance of all materials to site, Overheads & Contractors profit etc., complete for finished item of work for all floors.

Supplying & Fixing of 25.4mmdia,609.6mm long aluminium anodized towel rods with brackets and aluminium screws etc.,complete including cost and conveyance of all materials to site, Overheads & Contractors profit etc., complete for finished item of work for all floors..

Supplying & Fixing CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian makeincluding cost and conveyance of all materials to site, all labour charges, sales and other taxes on all materials etc., complete for finished item of work for All Floors.