GENERAL-MI PTA - Annual Maintenance of Mechanical Work 2024-2025-Annual Maintenance to Pump Motor and Accessories to Aranmula No. 1 LI Scheme-General Civil Work-1

Amount

Repairs of Pump and accessories

OD15653/2024-2025: Charges for Dismantling motor and pump from Base plate for 1 no 30 hp motor,1 no 5 Hp vacuum pump and other related accessories from LI Station and conveyed to work shop with the help of chain block, wire sling,coir rope etc. complete as directed by departmental officers at site.Code Description

OD16090/2024-2025:Charges for Dismantling pump from Base plate for 1 no 30 hp pump and other related accessories from LI Station and conveyed to work shop with the help of chain block, wire sling, coir rope etc. complete as directed by departmental officers at site. Code Description

OD15654/2024-2025:Dismantling Suction and Delivery pipe, bend etc from pipe line and lift pipe line and clearing and washing slurry from pipe and re setting the Suction and Delivery pipe to lines and level with the help of chain block, vadam, wire sling etc.

OD15655/2024-2025:Dismantling and Overhauling sluice valve from pipe line including dismantling,overhauling and resetting the same etc complete.

OD15656/2024-2025:Overhauling existing one 30 hp motor, separate the stator and rotor, remove the dust, cleaning with petrol, varnishing the winding with best quality varnish, heating, greasing the bearing, assembling and refitting the same and conducting test run etc complete as per directions of departmental officers at site

OD15657/2024-2025:overhauling existing old oil immersing starter, drain out the oil, cleaning the contacts with kerosene oil, replace the damaged O.C.B()il circuit breaker) contacts including magnetic coil, testing the trial run etc complete

OD15658/2024-2025:Charges for checking 100 Amps main switch, including attending minor repairs such as levelling the leg of unit, cleaning the contacts etc. complete.

OD15659/2024-2025:Charges for dismantling bearing welding and levelling the shaft fabricating and fixing gun metal shaft bush safely with hydraulic press andremachining,greasing the bearing overhauling,assembling,conducting test run etc complete

OD15660/2024-2025:Charges for erecting 1 no 30 Hp motor with corresponding pump and other accessories in correct alignment on bed including providing electric connections and trial running etc complete.

OD15661/2024-2025:Charges for resetting the vaccum pump on correct alignment, including renewing damaged pipe refixing the valve, checking the joints etc complete.

OD15662/2024-2025:Supplying Transformer oil

OD15663/2024-2025:Supplying Good quality nut bolt and washer

OD15664/2024-2025:Supplying 16m2 copper wire

OD15665/2024-2025:Supplying and providing 12 mm Gland Packing

OD15666/2024-2025:Supplying bearing Grease

OD15667/2024-2025:SupplyingSupplying pump oil

OD15668/2024-2025:Supplying Banian Waste

OD15669/2024-2025:Supplying Rubber bush

OD15670/2024-2025:Supplying GM Shaft bush

OD15671/2024-2025:Supplying Oil Seal

OD15672/2024-2025:Supplying Water seal

OD15673/2024-2025:Charges for lift up motor, vacuum pump and all related accessories from ground floor to upper floor safely with the help of chain block,coir rope etc complete, when pumping season is over and as directed by the deptl. officers at site

OD16032/2024-2025:Supplying and fixing 250 mm dia CI non return valve as per departmental officers at site.

P S RANJAN (BID ID -2000475)

Bidder Name

P S RANJAN

R K BABU