Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC | L1 | Accepted-AOC Accepted as L1 | |
| 2 | L2₹17.6 L+₹2.7 L (18.1%)Rejected-Finance RAHEJA NIWAS 243 GHORPADE PETH PUNE 411 042 | PUNE | PUNE | MAHARASHTRA | 411042 | L2 | Rejected-Finance Rejected | |
| 3 | L3₹19.8 L+₹4.9 L (33.0%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹22.7 L+₹7.8 L (51.9%)Rejected-Finance 10 RAMTEKDI ROAD PUNE 411 013 | PUNE | PUNE | MAHARASHTRA | 411013 | L4 | Rejected-Finance Rejected |
Tender Value
₹29.5 L
EMD Value
₹59,000
Closing Date
17 May 2021, 6:00 pmClosed
GE DEHU ROAD, PUNE
GE DEHU ROAD, PUNE
REPAIR RE CANNING OF CHAIRS AND RE UPHOLSTROY OF SOFA SET AT GE DEHU ROAD
2021_MES_437034_1
8521
Open Tender
Civil Works
Item Rate
180 days
GE DEHU ROAD, PUNE
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE DEHU ROAD, PUNE
₹59,000
Yes
1 Jun 2021
19 Apr 2021
24 May 2021
19 Apr 2021
17 May 2021
3 May 2021
Amount
Removing of unserviceable/broken parts of Chair dining without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No FD-279)
Rear leg.
Front leg.
Side/Front/Rear rails.
Back rest.
Stiffener (Side & Central one).
Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair dining.
Tightening of all parts/joints of whole Chair dining with bamboo pins.
Removing of unserviceable/broken parts of Chair Writing without damaging of other parts of chair writing, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No FD-280)
Rear leg.
Front leg.
Side/Front/Rear rails.
Back rest.
Stiffener (Side & Central one).
Supply and fixing with steel screw of triangular bracket of size 75x75x25mm of 1st class hard wood teak between legs and rails of Chair Writing.
Tightening of all parts/joints of whole Chair Writing with bamboo pins.
Removing of unserviceable/broken parts of Chair Easy without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No FD-229)
Front/Rear leg.
Front/Rear stiffener.
Front & back rail of seat/back.
Side rail of seat/back.
Supply and fixing in replacement of seat frame with new seat frame to chair easy of 1st class hard wood teak made to shape and size complete all as specified and shown in drg and as directed by the Engineer-in-Charge.
All as per Srl. Item No. 3.06 here-in-before but back frame of chair easy.
Tightening of all parts/joints of entire Chair Easy with bamboo pins.
Removing of unserviceable/broken parts of Chair dining cushion of size 450x400x770mm without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No FD/MAP-II/04)
12mm thick MR Gde Plywood seat with cushion and Tapestory cloth. Cushion/Foam shall be 75mm thick of 32 density, (Tapestory cloth shall not be less than Rs. 250/- per RM).
Supply and fixing only seat cover to tapestory cloth (Tapestory cloth shall be not less than Rs. 250/- per RM).
Front leg.
Rear leg.
Back Vertical stripps.
Back rest.
Stiffener (Side & Central one).
Tightening of all parts/joints of entire Chair dining cushion with bamboo pins.
Removing of unserviceable/broken parts of Chair Writing cushioned of size 475x460x860mm without damaging of other parts of chair, supply and fixing new parts made out of 1st class hard wood teak as shown on drg and specified.(Drg No CCE/KLP/05, FD/E6/MAP/12 & TP)
Seat with cushion and Tapestory cloth (Foam shall be 75mm thick of 32 density).
Back with cushion and Tapestory cloth (Foam shall be 75mm thick of 32 density).
Removing of unserviceable/broken parts of Chair Computer of size 475 x 460 x 860mm without damaging of other parts of chair computer as shown on drg and specified.(Drg No CCE/KLP/25, TP)
Seat with cushion and Tapestory cloth (Foam shall be 75mm thick of 32 density).
Back with cushion and Tapestory cloth (Foam shall be 75mm thick of 32 density).
Hydaulic system.
P U arms.
Pedestal (Bottom) frame with wheel coaster.
Chair easy cushion (Drg No CCE/KLP/26)
Removing of old/unserviceable seat with cushion of size 650x650x750mm from chair easy cushioned and S&F new seat with cushion of size 650x650x750mm duly upholsted with tapestry cloth of approved shade as per sample. Foam shall not be less than 100mm thick of make:- Kulon/Sleepwell/Cor-foam.
All as per Srl. Item No. 7.01 here-in-before but back of chair easy cushion.
Removing of old/unserviceable teapestry cloth of side arms of size 575x350mm and S&F new tepsestry cloth to side arms of size 575x350mm of approved shade or as per sample kept in furniture yard of GE, Dehu Road. (Cloth shall be not less than Rs. 250/- per RM).
Removing the old cane from various chairs and recanning with new half round 2mm wide plastic cane (Godrej/Gwalier pattern) and border with 3mm wide plastic cane. (Plastic cane shall be of white colour of Make: Shah/Premier/ Maharashra Poly Cane) complete all as specified and as directed by the Engineer-in-Charge.(Drg No FD-229, FD-279 & FD-280)
Taking down and removing the old cane from seat and back of Chair Verandah and recanning with new half round 4mm wide plastic cane in oval shape with mat pattern . (Plastic cane shall be of white colour of Make: Shah/Premier/ Maharashra Poly Cane) complete all as specified and as directed by the Engineer-in-Charge.(Drg No FD-359)
Supply and fixing of PVC seat and back 4mm thick to Chair verandah after removing old/broken PVC seat and back. Weight of 4mm thick seat and back of Chair Verandah is not less than 1.85Kgs each. (Make of seat and back of chair verandah is AMKO/Comfo/Harmony). (Drg No FD/MAP-II/06)
Supply and fixing of 20mm dia 16 guage stiffener conduit pipe with electric welding to seat of chair verandah including made to shape and size with frame and as directed by Engr-in-Charge.(Drg No FD-359)
M & L for electric welding to broken old frame of chair verandah including preparation of surface and removing the unwanted welding spot all as directed by Engineer-in-Charge.(Drg No FD-359)
Supply and fixing in replacement of unserviceable portions of frame of Chair Verandah with 20mm conduit pipe of wall thickness 1.6mm duly electric welding complete all as directed by Engr-in-Charge.(Drg No FD-359)
Supply and fixing in replacement of unserviceable round MS bar between the front legs frame of Chair Verandah with new 10mm round MS bar duly electric welding complete all as directed by Engr-in-Charge.(Drg No FD-359)
Supply & fixing in replacement of 100mm thick flexipuff/ U Foam cushion of 40 density of Make:- Sleepwell/Cor-foam/ Kurl-on, covered with new tapestory cloth (not less than Rs 250/- per running mtr) of sofa set complete all as specified and directed by the Engineer-in- charge.(Drg No FD-373)
Supply & fixing in replacement of unserviceable sofa set cushion cover with new cushion cover of tapestory cloth as per sample complete all as specified and directed by the Engineer-in- charge(Taperstory cloth shall not be less than Rs 250/- per RM) .(Drg No FD-373)
Taking down and removing the tapestory cloth and unserviceable cushion foam of seat and back of Sofa Set 5 Seater (3+1+1) and upholstory with new tapestory cloth (not less than Rs. 350/- per RM) and 32 density new cushion to sofa Set complete all as specified and as directed by the Engineer-in-Charge. (Cushion / Foam shall be of make: Sleepwell/Kurl-on/Cor-Foam) (Drg No TP, KLP)
M & L painting to frame of chair verandah with white synthetic enamel paint including preparation of surface. (after removing of the cane) and provide 04 Nos PVC shoes of white colour to legs of chair Verandah as specified and directed by Engr-in-Charge.(Drg No FD-359)
Material and labour for French polishing to chair Easy after removing the old polish with emery paper with grinder machine and prepration of wooden surface by providing putty and burnt seina and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces and provided 04 Nos nylon buffers with steel screw to legs of chair easy complete all as directed by Engineer-in-Charge.(Drg No FD-229 & CCE/KLP/26)
All as per Srl item No 19 here-in-before but chair dinning.(Drg No FD- 279 )
All as per Srl item No 19 here-in-before but chair writing.(Drg No FD- 280)
All as per Srl item No 19 here-in-before but chair dining cushioned.(Drg No FD/MAP-II/04)
All as per Srl item No 19 here-in-before but chair easy cushioned.(Drg No FD-CCE/KLP/26)
Material and labour for French polishing to sofa set 4 seater after removing the old polished and prepration of wooden surface by providing putty and scrubbing with emery paper upto smooth surface including preparation of old polished surfaces complete all as directed by Engineer-in-Charge.(Drg No FD-373 )
All as per Srl item No 24 here-in-before but sofa set 05 seater.(Drg No FD-373 )
Mahesh Traders
DR J S CHADHA AND SONS
KASTURILAL HARICHAND OHRI AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .