Improvement works for Extension of DFC Room and providing Toilet facilities at Central office building, Mannarpuram, Trichy.

Amount

Dismantling and clearing away ( corporation limit ) from site to the designated place as directed by the engineer at site including labour, lead and lift etc., complete.

Floor Finish, Floor tiles & Dadooing

Brick Masonry in cement mortar walls under 3m high

Doors and Windows including removal of frames, hinges and fastenings

RCC 1: 1.5:3 using 12-20mm HBS metal (machine crushed) metal with centering, shuttering, form work including cost of all material, lead, lift,etc, complete, but excluding cost of steel reinforcement(As instructed by the Engineer at site)

Grade Beam

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Brickwork in CM 1:5 mix using II class chamber bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete.

Super Structure

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift, etc., complete.

Special type of plastering with CM 1:3 - 10mm thick by using special bonding agent and repair material including chipping of concrete, cost of materials,curing, labour, lead,lift etc., complete.

Supply and fixing of door with frame using Solid Core Flush Shutters with teakply on one side and commercial ply on other side with teak wook lipping alround 35mm thick as directed by the engineer including labour charges etc., complete

Supply and fixing of door fitings with frame as directed by the engineer including labour charges etc., complete

Supply and fixing of European Water Closet with "P" or "S" Trap with Double Flapped Seat and Seat Cover with Brass Hinges and 12.5 litre capacity PVC Low Level Flusing Tank with all internal fittings including cost of Stainless steel health faucet and all other material, labour, lead, lift, etc, complete.

Supplying and laying PVC pipe 110 mm outer die 6kg / cm2 ISI make for laying the Sewer line including cost of pvc pipe coupling labour for cutting laying fixing tightening etc. complete.

110mm dia PVC pipe

Supplying, fixing and laying of UPVC pipe 10 Kg/cm2 for water supply arrangement including cost of all materials, labour, lead, lift etc complete.

25mm dia UPVC pipe

20mm dia UPVC pipe

Flooring with good quality ceramic tiles/Non slippery tiles of size 305 mmx 305 mmx 6mm laid over 20mm thick CM 1:3 of approved quality and colour including cost of all materials lead,lift etc complete,

Dadooing with glazed tiles of best approved quality of make johnson, neycer etc, over CM 1:3, 12mm thick including cost of all materials, labour, lead, lift, etc., complete.(As instructed by the Engineer at site)

Colour washing two coats with Plastic Emulsion paint over one coat of Plastic Emulsion primer for inside wall including necessary plaster of parrys two coats cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of 15mm high quality brass Chromium plated screw down bib cock (Heavy Type) such as leader, zeolite and zenith of any other approved quality cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing 100x75mm floor trap with SS grating in bath room including cost of all etc., complete

Supplying and fixing of approved quality of Brass Chromium plated towel rod of size 90cm and fixing the same over the teak wood round block and soap tray (pvc) in bath room including cost of all materials, lead, lift, etc., complete.

Fabricating Supplying and fixing in position of Aluminium anodised of natural colour matt finish 1/2 fixed glazing 1/2 prelaminated board of Aluminium partition of size 1.20m x2.10 m with required rubber beading etc, including necessary dismantling holes in RCC column, masonry wherever in necessary as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) ( SD16 )

Dismantling of existing aluminium partition, Re fabricating of dismantled aluminium partition and fixing in position of Re fabricated Aluminium anodised of natural colour matt finish 1/2 fixed glazing 1/2 prelaminated board of Aluminium partition with required rubber beading including necessary dismantling holes in RCC column, slab, masonry wherever in necessary as directed by the departmental officers.

Supplying,fabricating,erecting and fixing of 10 mm thick plaster of paris plain sheet (gyprock Pop board - Saint Gobain make) for false ceiling at a height of 3 m from the existing floor level,including cost of all materials, lead, lift, fabrication, carving, providing cornice work, droping design work,erection charges, cleaning and removal of debris from the work site, Interior painting with two coats of approved interior emulsion over one coat of primer .The False Ceiling design will be provided and execution of work is to be carried out as per the drawing and without any deviation etc., complete.