8334 REPAIR MAINT TO FLOOR, ROOF, WATER TROUGH, RCC, BRICK WORK, ALLIED WORK IN VARIOUS CHARGES INCL INTERNAL ELECTRIFICATION AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY.

Amount

Taking down shutters only of any description area n'exc 1.00 sqm complete all as specified and directed.

Taking down shutters only of any description, area exc. 1.00 sqm but n, exc. 2.00 sqm, each, complete all as specified and directed.

Refixing of shutters only of any description area n. exc 1.00 sqm at same opening complete all as specified and directed.

Refixing of shutters only of any description area exc. 1.00 sqm but n, exc. 2.00 sqm, each at same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n'exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.

Refixing of chowkhat frame area n'exc 1.50 sqm at same opening complete all as specified and directed.

Refixing of chowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm, each at same opening complete all as specified and directed.

S&F 2nd class hard wood glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), supplied and fitted to chowkats complete all as specified and as directed.

S&F 35mm thick 2nd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated complete all as specified and directed.

S&F 35mm 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 1991, Section- 8, Clause 8.20(b), complete all as specified and directed.

S & F A solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as spd

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as peccified

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n' exc. 0.5 sqm in each pane all as spd.

S & F 3mm thick figured glass pine head type and glazing with oil putty in square n' exc. 0.5 sqm in each pane all as spd.

M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames, glazed with putty or fixed with beads complete all as specified.

M&L for Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required.

S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0

S&F second class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples.

M & L for IInd class hard wood fillets square, rectangular or triangular insection, chamfered on edges & face and bullnosed for sectional area n' exc 3 Sqcm complete all as specified and directed.

S & F Mild steel work as in holdfast conforming to Fe 410 -0 or Fe 310-0 complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

All as per Srl Item No 24 here in before but 100mm long

Supply and fix only 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

All as per Srl Item No 26 here in before but 75 mm long

S&F 150mm long mild steel pressed handle oval type stove enamelled black all as specified

All as per Srl Item No 28 here in before but100mm long

S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed.

S & F for 100mm long butt hinges extruded aluminium anodised complete all as spd. & directed.

S & F 150mm long extruded aluminium anodised handle all as specified

S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.

Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.

Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

All as per Srl Item No 38 here in before but half brick in CM(1:4)

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

Taking down existing GI tubing 15 mm dia & connections including cleaning and refixing serviceable GI tube 15mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

Taking down existing GI tubing 20 mm dia & connections including cleaning and refixing serviceable GI tube 20mm dia with new fittings and fixed to wall, ceiling or laid in floor all as specified and directed

M&L for Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S & F and repair 15 MM bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) all as specified.

S & F in repair 15 MM bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 110 Gms) all as specified.

S & F in repair 15 MM bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends all as specified.

S & F and repair 15 MM bore fency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions all as specified.

S & F in repair 15 MM bore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends all as specified.

S & F and repair 15 MM bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all complete all as specified.

S & F and repairs fo brassChromium plated shower rose 125mm size with or witout swivel joints including fixing to GI pipe all as specified and directed.

S & F in repair for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc. all as spd.

S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm, white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

S & F PVC waste pipe of 32 mm dia PVC socket for WHB/Kitchen sink complete all as specified and as directed.

S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) complete all as specified and as directed.

S&F rotational moulded polethylene water tank of 500 ltrs capacity, white colour, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing PVC/RCC water tanks capacity n exc 500 ltr complete all as specified and directed.

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.

S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore complete all as specified and as directed.

S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore complete all as specified and as directed.

Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even complete all as specified and as directed. Note :Cost of WPC deemed to be included qouted rates

M&L 10mm thick rendering in CM 1:6 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in CM 1:4 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M & L for applying two coat of distemper oil imulsion on newly plastered surface of walls including all preparation complete all as spd and directed

M&L Three coat of white wash as on new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed.

M&L two coats of cement base paint on new plastered surface after necessry preparation of surface complete all as specified & as directed.

M&L Three coat of white wash as on new plaster surface/concrete surface as after necessary preparation of surface complete all as specified and as directed.

Dismantling of PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S & F in repairs 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor neceesary FI Clamp of size 40X6 mm including making good with cement mortar 1:3 complete all as specified and directed.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee, Elbow, Socket) complete all as specified and directed.

S & F in repairs 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm making good with cement mortar 1:3 complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.

M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, including taking out unserviceable Nahani trap / floor trap complete all as specified and directed. (ISI marked and conforming to relavent IS)

M & L for 18/19 mm thick veneered particle board interior grade solid core prelaminated both side with decorative choice lamination fixed with screw to timber frame work and directed by Engg. in. charge

M & L machine cut Kota stone 20 to 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete up to deserid finish and including 20mm thick bedding layer of CM 1:6 for receiving floor finishes and Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove complete all as directed.

M&L Kota stone slab 20 to 25 mm thick in riser of steps,skirting, dado laid over cement screed jointed including 15mm thick rendering in CM 1:4 for receiving floor finish all as specified and directed.

S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nails at bottom, back and front side of wooden doors etc all as directed and specified

M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, urinal port etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S & F in repairs 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.

M & L in repairs for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook complete all as spd & directed

M & L in repairs for 6mm thick AC two pieces adjustable plain wing ridge fixed with coach screw complete all as spd & directed

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated / Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Demolition of cement concrete in ground floor paving n. exc. 15 cm thick below or above GL complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed.

M&L for PCC (Type B-1 1:2:4 using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses lacing courses, parapets and railings upto 60 cm in height copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water throughs and the like including weathering, slightly rounded or chamfered angles and throating, all as specified and as directed.

M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar 1:6, complete all as specified and directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

M&L P C C 1 : 2 : 4 type B2 using 40 mm graded stone aggrgates as in foundation filling and mass cooncrete complete all as specified and mixed with and including metallic hardner @ 4% by weight of cement even and fair laid in panels finished with spike rolling complete all as specified and directed.

M & L forming 12 mm thick expansion joint filled with bitminious filler with sealing compound Grade A complete all as specified and directed.

Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed.

M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work or side of wall n' exc. 200 mm thick including fair finished complete all as spd and directed

M & L mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I), complete all as specified and directed.

All as per Srl Item No 108 here in before but 5 mm dia and over upto and including 10 mm dia in striupps

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

S&F aluminum alloy anodised door or (partition fixed type) frame fixed with side hung shuters and glazing fixed with and including 4.8 mm thick tinned glass fixed wih rubber gaske with aluminium beading clips made with aluminium box section as appended below complete all as specified and directed. (i) Aluminium frame of size 100 x 44 x 1.98 mm thick and rawi plug. (ii) Middle and lock rail 150x44x1.98 mm thick and above. (iii) Bottom rail 150x44x1.98 mm thick and above. (iv) Aluminium beading 0.7 mm thick (v) Aluminium handle 'D' type 150mm long, aluminium tower bolt 9.9mm dia shoot 200 mm long brass long brass mortice lock 100mm 4 leaver aluminium stopper, cleat, double action floor spring hydraulically regulated made of less than 1.25 with stainless seel cover governing pivo made of brass other part of steel heavy duty. (vi) Fixing lugs/ hold fast of appropriate size including PCC bed block 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) (vii) Making good disturbed wall surface and making the surface match with existing wall finish by applying existing wall finish.

S&F powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over

M&L for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

Dismantling of concrete by chiseling from RCC members column up to 1 mtr height of size 350X450 or more, remove rust and acralic polymer on old rusted reinforcement and providing at places additional reinforcement welding with existing reinforcement as directed wherever required binding fill with RCC 1:1.5:3 (with 10-12mm graded stone aggregate) finish the surface and match proper dimension including all necessary form work including S&F kota stone 20-25mm thick on all around the column in vertical surface up to 1 mtr height complete all as specified and directed. Note:- This item will be used for repair of column in horse paddock. Contractor can visit the site before quoting the rate of this item. All necessary materials required for repair will included in quoted rate nothing extra will be paid on this account.

Taking down copper/aluminum point wiring complete including fixture and fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings, holders MCB etc and removing the items from site to store for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and directed.

M & L for point wiring with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor FRLS 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) drown in existing PVC concealed or surface conduit/ casing caping with all accessories including 1.5 sqmm copper multistrand conductor FRLS 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel/ PVC terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switch , socket and fan regulator with 3 mm thick hylum laminated sheet cover incl cutting Chases pinning in and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socket point on same board board

One 5A flush type switch socket point on independent board

All as per Srl item no 117 herein before but 2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps

S&F switch piano flush type single pole one way 5 Amps. Make- Anchor/Havells

S&F Switch Piano flush type single pole one way 15 Amps. Make- Havells/ Anchor

S&F Socket outlet 2 in 1, 3 pin 5 Amp flush type. Make-Havells/ Anchor

S&F socket outlet 2 in 1, 3 pin 5Amp and 15 Amp Make-Havells/ Anchor

M & L for point wiring for modular fittings using 1.50 sqmm size, PVC insulated, unsheathed 1100 volts grade single core multi-stranded (FRLS) copper conductor cable in proper colour coding drawn into and including non metallic rigid PVC conduit medium grade (not less than 20 mm dia) with metal flush box & cover plates etc for mounting of modular fittings including one continuous run of PVC insulated (green colour) 1.50 sqmm size stranded FRLS copper conductor cable as in earth wire and connecting all metal parts to common earth dolly incl cutting and chases pinning in for concealed conduit wiring and making good of disturbed surface complete all as specified and directed for One light point / fan point / bell push point controlled by one modular switch 6 Amp. Wire Make- Havells/Polycab/Shalabh

One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch

One 5A flush type socket point on same board board

One 5A flush type switch socket point on independent board

All as per item no 123 herein before but 2.5 Sqmm PVC insulated sheathed cable and 2.5 Sqmm cable for earth wire for one 5 pin socket outlet 15 Amps

S&F modular switch, one way 6 Amps, one module of suitable colour complete all as specified and directed.

S&F modular switch, one way 16 Amps, one module of suitable colour complete all as specified and directed.

S&F modular socket , 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

S & F modular socket , 6 Amps/ 16 Amps, 2/3 pin combined, 2 module of suitable colour complete all as specified and directed.

S&F Lamp Holder, PVC/Polycarbonate type with back plate for batten fitting including Lamp LED,aluminium heat sink powder coated white with PC diffuser & B22 base cap 9watt 240 Volt complete all as specified and directed.

S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.

Fixing only old serviceable light fittings any type received from item no-116 above including electric connection & cleaning complete all as specified and directed.

Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item Nos.-116 above including cleaning & connecting up with 3 core flexible copper conductor cable of suitable size.

S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type, 180 Watt, 240 Volts complete all as specified and directed.

S&F modular fan Step regulator 120 watt, 230 Volts, 2 module of suitable colour complete all as specified and directed.

S & F in repairs normal/worm white LED Tube light fittings 18/20 Watt, 4', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F in repairs Normal/worm white LED Tube light fittings 9/10 Watt, 2', T-8 complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in repairs LED Bldg security light 45Watt, made up pressure die cast aluminium housing with toughened glass and high power LED & Secondary lense with IP-65 & provn of bracket made out of suitable size GI Pipe light grade up to 1.5 mtre long bent to shape with ms clamps nut bolts etc & paints for fixing of LED light on bldg/pole complete and including suitable electric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V gradecomplete all as specified and directed.

S&F in repairs LED Flood light 72Watt, made up pressure die cast aluminium housing with toughened glass and high power LED & Secondary lense with IP-65 & provn of bracket made out of suitable size GI Pipe light grade up to 1.5 mtre long bent to shape with ms clamps nut bolts etc & paints for fixing of LED light on bldg/pole complete and including suitable electric connection with flexible 1.0 sqmm PVC insulated copper conductor cable 1100 V grade complete all as specified and directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in & including PVC Casing & caping /Conduit all as directed.

M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor in existing PVC Casing & caping/Conduit all as directed.

S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SPN, 20 A , 240 V MCB complete all as specified and directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415 Volts double door three phase & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and directed.

S&F in repairs Isolator three phase and neutral, 4-poles, 63A-100A, 415V 10KA. B' curve type complete all as specified and directed.

S&F in repairs MCB single phase and neutral 16A-32A, 230V 10KA. B' curve type complete all as specified and directed.

S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed

Dismantiling the ceiling fan and examine complete part thoroughly, oiling, greasing all parts and complete overhauling of fan including replacement of spares & accessories, reassembling, making fully functional and also depositing to E/M stores & Hanging the ceiling fans after cleaning, painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters including electric connection with suitable electric cable complete all as specified ( Items used in replacement of unsv items shall be measured & paid separetly).

M&L for taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan, testing , cleaning, painting & re-writing existing fan Nos complete all as specified and directed.

Supply in repairs/replacement ball bearings suitable for ceiling fan of any sweep complete all as specified and directed.

Supply ii repairs/replacement fan hook clamps steel & rubber reel with set of 2 nos nut, bolts & pins suitable for ceiling fan hanging complete all as specified and directed.

Supply in repairs/replacement fan down rod made of 15 mm bore GI pipe, 45 cm long complete all as specified & directed.

S & F in repairs Fan blades complete with nuts & washers and complete all as specified & directed.

S & F in repairs capacitor 2.5 Mfd, 415 , 50Hz. Make- Universal/Tibcon

S & F in repairs copper winded rotor & stator assembly for making fully functional the unsv Ceiling fan complete with metallic cover screws, blades etc for 1200mm sweep ceiling fan all as specified and directed. Make- Bajaj/Orient/ Havells/Crompton

M&L for disconnecting & taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the Exhaust fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing , complete all as specified and directed.

S & F in repairs capacitor 4.0 Mfd, 415 , 50Hz complete all as specified and directed.

S & F in repairs motor kit copper winded for making fully functional the unsv PVC Exhaust fan 200mm sweep complete all as specified.

Disconnecting/Taking down from position existing defective storage type water heater( Geyser ) 25 Ltrs capacity, carefully, Opening for repairing/replacement of deffective spares including replacement of spares & accessories Such as Geyser element, thermostate, Geyser assembly (Items used in replacement of unsv items shall be measured & paid separetly) , making leak proof of inner copper tank & assembly by brazing and reassembling and making fully functional & packing new glass wool etc and also depositing to E/M stores or Re-install of geyser after cleaning painting and writing MES No with existing colour synthetic enamel paint, 2.0 cm high letters and fixing of suitable nuts bolts with washers on wall including all necessary electrical connection with three core 1.5 sqmm PVC insulated sheathed of stranded copper conductor electric cable and also water connection with suitable heavy duty PVC connections complete all as specified.

S & F in repairs Geyser assembly made out of copper for 25 Ltr capacity Geyser as per sample complete all as specified and directed.

S & F in repairs Geyser element upto 2.0KW as per existing such as push type/thread type/dual clip type etc with rubber gasket suitable for Geyser of complete all as specified. Make:- Bajaj/ Recold/ Havells.

S & F in repairs thermostate switch ( ISI Marked ) suitable for Geyser 25 Ltr capacity, adjustable 0 degree to 80 degree centigrade and acting at 70 degree centigrade. ISI Marked, Make- Thetta/Bajaj

Repairs on existing inner copper tank by using brazing to make leak proof not exceeding 15 cm in length complete all as specified and directed.

Repairs on existing copper Geyser assembly by using brazing to make leak proof not exceeding 12 cm in length complete all as specified and directed.

M/s Naresh Kalia

M/S MSD & Associate