Loading
Loading…
Loading…
Tender Value
₹5.2 L
EMD Value
₹10,400
Closing Date
15 Jun 2026, 9:00 am
Executive Engineer Jal Shakti Division Shillai
Executive Engineer Jal Shakti Division Shillai
Sub Head - Repair of KSB Make Pump Model HAD-50/15, Providing and Fixing 150 HP Starter and PVC Copper Cable
2026_HPIPH_135624_1
SHL-SMR03-780-JSV DIV-SHILLAI 1758-1800 Dt 03.06.2026
Open Tender
Pumps/Motors
120 days
Shillai
Please refer Tender documents.
8 documents required · 8 mandatory
₹350
Executive Engineer Jal Shakti Division Shillai
₹10,400
4 Jun 2026
4 Jun 2026
15 Jun 2026
4 Jun 2026
15 Jun 2026
4 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of suitable direct on line/oil immersed star delta /ATS/stator rotor starter of 150 HP standard make such as MEI/Kilburn/Jyoti/ Siemens/Larson & Tubro conforming to BIS-8544-1979 latest with up to date ammendments for squirrel cage/slip-ring motor (make to be specified by the tenderers) mounted on panel board with magnetic type over load release & dashpot,time lag,under voltage release with initial oil filling . | 1 | Each | - | - |
| 2 | P/L suitable size copper PVC insulated armoured power Single core cable 150 mm square conforming to BIS 1554 (part I)-1988 or latest with up to date ammendments of Siemen/ Gloster /ICC/ EICO/National / IEC make from switch to starter & starter to motor (one cable carrying all three phases) including all other electrical equipment /accesories such as thimbles,flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor.The type,size & make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. | 65 | Rmt | - | - |
| 3 | P/L suitable size copper PVC insulated armoured power single core cable 120 mm square conforming to BIS 1554 (part I)-1988 or latest with up to date ammendments of Siemen/ Gloster /ICC/ EICO/National / IEC make from switch to starter & starter to motor (one cable carrying all three phases) including all other electrical equipment /accesories such as thimbles,flexible pipes, solder,nuts & bolts,cable glands etc. laid in pipes or trenches under floor.The type,size & make will be subject to approval of HPSEB authorities. In case of non acceptance by HPSEB authorities it shall have to be replaced by the tenderer free of cost. | 65 | Rmt | - | - |
| 4 | Repair of water pump shaft by welding , turning, threading & straightening as per bearing size complete in all respect | 1 | job | - | - |
| 5 | Impeller brass welding , turning & polishing as per required size complete in all respect | 4 | Each | - | - |
| 6 | Water pump side balance plate disc brass welding , turning & polishing as per requires at site | 2 | Each | - | - |
| 7 | Febricating and fixing new gland sleeve stainless steel as per sample complete in all respect | 2 | Each | - | - |
| 8 | Providing and fixing Roller bearing NU 207 with oil & greasing complete in all respect. | 1 | Each | - | - |
| 9 | Providing and fixing 95 No thimble, finger and gutka in oil immersed MEI make starter 75 HPke | 1 | set | - | - |
| 10 | Carriage of pump set to workshop and back to site of work i/c testing complete in all respect. | 1 | Job | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
Form_6_1_.pdf
Tender Documents • 0.23 MB
Terms_con_1.pdf
Tender Documents • 0.17 MB
BOQ_200828.xls
BOQ • 0.27 MB
Download all tender documents and submit your bid