Loading…
Loading…
Tender Value
₹44.8 L
EMD Value
₹44,802
Closing Date
7 Jul 2026, 3:30 pm3d left
Chief Engineer-V, Mission Bhagiratha, Hyderabad
O/o Superintending Engineer, MB Circle Mahabubnagar, Kidwaipet, Opp: Police guest house, near Old Bus Stand Road, Mahabubnagar-509001
Replacement of Existing Pipeline from Bodabanda village Jn to Narlapur village Jn under Anjanigiri Reservoir of Kollapur (M)
710772
01/AEE-I/DEE-II/MB/Tender/Tender Releases/2026-27, Dt: 17-06-2026 of Chief Engineer-V, Mission Bhagiratha, Hyderabad
OPEN
Water Supply
NAGARKURNOOL
17 documents required · 17 mandatory
₹1,586
₹44,802
23 Jun 2026
23 Jun 2026
23 Jun 2026
Construction of pipe line including supply,delivery,laying and Jointing of HDPE pipes for water supply as per IS specifications with its amendments and revisions thereon including supply of Pipes, trench excavation for Pipe lines in all Soils( using 2/3rd Machinary + 1/3rd Manual means) except rock requiring blasting, lowering, laying and jointing of pipe line true to alignment and gradient and refilling trenches with excavated earth (other than rocky Soils and boulders) with watering, tamping and removing surplus earth from work site and testing pipe line with water and required pressure etc., complete. The rates are inclusive of cost, conveyance of all materials, labour charges needed for finished pipe line work excluding GST.- 180 mm Dia 6kg/cm2 HDPE pipes
Construction of pipe line including supply,delivery,laying and Jointing of HDPE pipes for water supply as per IS specifications with its amendments and revisions thereon including supply of Pipes, trench excavation for Pipe lines in all Soils ( using 2/3rd Machinary + 1/3rd Manual means) except rock requiring blasting, lowering, laying and jointing of pipe line true to alignment and gradient and refilling trenches with excavated earth (other than rocky Soils and boulders) with watering, tamping and removing surplus earth from work site and testing pipe line with water and required pressure etc., complete. The rates are inclusive of cost, conveyance of all materials, labour chaarges needed for finished pipe line work excluding GST.- 180 mm Dia 8kg/cm2 HDPE pipes
Construction of pipe line including supply,delivery,laying and Jointing of HDPE pipes for water supply as per IS specifications with its amendments and revisions thereon including supply of Pipes, trench excavation for Pipe lines in all Soils( using 2/3rd Machinary + 1/3rd Manual means) except rock requiring blasting, lowering, laying and jointing of pipe line true to alignment and gradient and refilling trenches with excavated earth (other than rocky Soils and boulders) with watering, tamping and removing surplus earth from work site and testing pipe line with water and required pressure etc., complete. The rates are inclusive of cost, conveyance of all materials, labour chaarges needed for finished pipe line work excluding GST.- 75 mm Dia 8kg/cm2 HDPE pipes
Manufacture, Supply and Delivery of MS pipes as per IS 3589 and 1239, with its amendments and revisions there on with and lowering, laying and Jointing to true to allignment and Gradient including one coat of Primer Painting & 2 Coats of Anti corrosive Bitumen Paint (Black) Gr - I Bld.SSR item. No.204 - TBSC-G.I-19 at out Side of Pipe line incl., cost and conveyance of all materials, labour charges, Loading & Unloading Charges all taxes, CED and duties etc., complete excluding GST.- MS 150 mm Dia 6 mm Thick
Supply,delivery,laying and Jointing of Single Chamber DI Air Valve with Body and cover in Ductile Iron of grade SG 400/12 or equivalent grade as per I.S.3896-part2-1985 and subsequent revisions on pipe line including supply of Air valve ,C I Specials to suit the pressure class of pipe, Construction of RCC valve chamber etc., complete for finished items of work but excluding GST.- 50mm Air valve on 180mm Dia line
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-par 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. including Construction of RCC valve chamber., complete for finished item of work excluding GST. 150mm dia Sluice valves on 180 mm HDPE Line
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-par 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept. excluding Construction of RCC valve chamber., complete for finished item of work excluding GST. 250mm dia Sluice valves on 250 mm Line
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Sluice valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-par 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Construction of RCC valve chamber., for finished item of work excluding GST. 80mm dia Sluice valves on 75 mm Line
Manufacture, Supply and delivery of DI D/F Gate Valves (Soft Seated) Resilient seated soft sealing gate valves (Scour Valves) with body bonnet of ductile cast iron of grade GGG-40/ SG- 400/15 or GGG-50/SG-500/7 or equivalent grade as per I.S.3896-par 2-1985 and subsequent revisions, wedge fully rubber lined with EPDM food grade quality and seals of NBR and the valves should be of vacuum tight and 100% leak proof with face to face dimensions as per BS5163-89/IS14846-2000/DIN 3202 F 4. All the valves should be with Electrostatic powder coating both inside and outside pocket less body passage. Drilled as per requirement of the dept including Construction of RCC valve chamber., for finished item of work but excluding GST. -100mm dia Scour Valve On 180 mm HDPE Pipe Line
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
BOQ Kollapur.xlsx
TENDER_DOCUMENT • 1.32 MB
Thumbs.db
TENDER_DOCUMENT • 0.01 MB
Vol -III PL Drg.JPG
TENDER_DOCUMENT • 0.05 MB
Vol _I Kollapur.docx
TENDER_DOCUMENT • 0.35 MB
1.General Tech.Specf.pdf
TENDER_DOCUMENT • 0.40 MB
10.WTPs Specs.pdf
TENDER_DOCUMENT • 0.75 MB
2.civil structures.pdf
TENDER_DOCUMENT • 0.06 MB
3.DI pipes.pdf
TENDER_DOCUMENT • 0.15 MB
4.MS Pipes.pdf
TENDER_DOCUMENT • 0.35 MB
5.PCCP Specifications.pdf
TENDER_DOCUMENT • 0.09 MB
6.BWSC PIPE.pdf
TENDER_DOCUMENT • 0.04 MB
7HDPE pipes.pdf
TENDER_DOCUMENT • 0.07 MB
8.UPVC Pipes.pdf
TENDER_DOCUMENT • 0.10 MB
9 VALVES Specifications.pdf
TENDER_DOCUMENT • 0.10 MB
Thumbs_1.db
TENDER_DOCUMENT • 0.11 MB
~$BOQ GMC.xlsx
TENDER_DOCUMENT • 0.00 MB
~$l _I GMC.docx
TENDER_DOCUMENT • 0.00 MB
~$l _I Kothur Solipur.docx
TENDER_DOCUMENT • 0.00 MB
Download all tender documents and submit your bid