Ward 24 Work on covering the drain from the Councilors office to Syed Sahabs location.

Providing and and laying in position ready mixed or site batched Asien mix cement concrete for reinforced cement concrete wwwk; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana /Ordinary Portland Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate/retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage. for all leads, but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement, 5.33.2 All works above plinth level upto floor V level 5.33.2.1 Concrete of M25 grade with minimum cement content of 330 kg/cum RATE (DSR Rate x 0.735x109/107) 9860.40 x 0.735x109/107

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete RATE (DSR Rate x 0.735x109/107) 392.15 x 0.735x109/107 raft

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc S.I.No. 584(i)

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I SI No. 504

Supplying and Fixing of 19mm thick Black S mirror inaugration stone of size 900X600mm Including base of 230X900mm brick base with foundation and 230mm x230 brick work around the stone, back base 115mm thick brick work, plastering and painting all copmlete as per direction of E/I.