T-11/EDCP/2024-25

Amount

Carriage of following line material from Store centre-Pilibhit to site including measuring, weighing, loading, unloading at both ends and proper stacking at safe site under EDD- Pilibhit (Distance up to 30 Km.)

PCC Pole 8.5 mtr. Long

11 KV T-off channel

11 KV XLPE Cable box (3x120) SQMM

11 KV XLPE Cable of size (3x120) SQMM

Erection of PCC Pole 8.5 mtr. Long including cutting, making holes, fixing of all types clamps, stone pad etc. of accessories digging of pits complete in all respect, as per RESSPO drawing. Usable T&P labour and nut bolts & washer, clamps, stone pad etc. proviede by contractor. Only PCC Pole provided by department.

Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Laying of single circuit 11 KV AL XLPE Cable 3x120 SQ MM in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks,. (all the material required for cable laying will be supplied by the contractor except 11 KV XLPE cable)

Hosting of 11 KV AL XLPE Cable 3x120 SQ MM on double pole with GI Pipe of size 6'' dia 3 m long including its jumpering complete with clamps, nuts and bolts. (GI pipe, clamps, nutbolt etc. provided by contractor except 11 KV XLPE cable)

Fixing of 11 KV XLPE Cable box (3x120) SQMM all type of usable nut bolt & washer and clamps etc. provided by contractor only cable box provided by department.

Carriage of following line material from Store centre-Pilibhit to site including measuring, weighing, loading, unloading at both ends and proper stacking at safe site under EDD- Bisalpur (Distance up to 60 Km.)

ST Pole 11 mtr. Long

PCC Pole 8.5 mtr. Long

V cross arm

11 KV Top channel

11 KV T-off channel

Earthing rod complete

11 KV Disc insulator

11 KV Poly Pin Insulator

Stey set complete

Barbed wire

11 KV XLPE Cable box for (3x185) SQMM cable

ACSR weasel conductor

11 KV XLPE Cable of size (3x185) SQMM

11 KV XLPE Cable of size (3x70) SQMM

Erection of the following supports including cutting, making holes, fixing of all types clamps, stone pad etc. of accessories digging of pits complete in all respect, as per RESSPO drawing. Usable T&P labour and nut bolts & washer, clamps, stone pad etc. proviede by contractor. Only PCC and ST Pole provided by department.

Single ST Pole 11 mtr. Long.

11 KV double pole structure ST Pole 11 mtr. Long complete

Single PCC Pole 8.5 mtr. Long.

11 KV double pole structure PCC Pole 8.5 mtr. Long complete

Concreting of supports at the time of erection of pole in 1:4:8 concrete ratio from bottom of pole to ground level and plinthing of supports upto 300mm above ground level by using cement, sand & coarse aggregate in ratio 1:4:8 as per RESSPO drawing with watering/curing properly upto proper setting of plinthing. All matrial would be provided by the contractor.

Erection of stay set with stay wire, stay clamp & stay insulator including with grouting of stay set by concrete of ratio 1:4:8 as per RESSPO norms before back fitting of the pits including binding, climbing, clamping, tightening and nozzeling of stay wire in all respect as per RESSPO norms. All clamps, nuts, bolts, stay insulator, cement. Brick, ballast, sand etc would be provided by the contractor. stay set provided by department.

Earthing of ST Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr. above from the plinth of the support. All type nut & bolt would be given by the contractor. Earthing rods provided by department.

Earthing of PCC Poles of the line is to be done by inserting the MS earth rod (1800x20mm) into soil by hammering and properly fastning with GI wire to each support by nut & bolt. Earthing rod must be 0.15 Mtr. above from the plinth of the support. All type nut & bolt would be given by the contractor. Earthing rods provided by department.

Laying and sagging of 3 phase ACSR Weasel conductor from double pole at tapping point of 11 KV feeder line including jumpering, hoisting, fixing of all type of insulators, binding, jointing and its clamping etc in all respect. ACSR Weasel conductor provided by department.

Laying of single circuit 11 KV AL XLPE Cable 3x185 SQ MM in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks,. (all the material required for cable laying will be supplied by the contractor except 11 KV XLPE cable)

Fixing of 11 KV XLPE Cable box (3x185) SQMM all type of usable nut bolt & washer and clamps etc. provided by contractor only cable box provided by department.

Laying and fixing of 11 KV XLPE Cable of size (3x70) SQMM by over head complete work in all respect. 11 KV XLPE cable provided by department.

Providing and fixing of danger board with clamp by contractor.

Laying of barbed wire by contractor.

Carriage and received back material from work site to store centre, Pilibhit with loading & unloading and proper stacking. (Distance up to 60 Km.) Complete work in all respect.

M/S BEG ENTERPRISES (BID ID -4873430)

M/S HINA ELECTRICALS (BID ID -4872556)