Proj no 291PALAPRA ANNAKKAMPAD ROAD IMPROVEMENT

Amount

IRISH DRAIN

3.5.1:Excavation in Cutting in Soil by manual means with lead upto 50 m <br> Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with a lift upto 1.5 m and lead upto 50 m as per Technical Specification Clause 302.3

OD309772/2022-2023:Filling with Quarry muck - Filling up low lying and water logged areas with local material / quarry muck ,spreading in layers ,levelling the top at side and consolidation by ramming etc complete for improving the CBR value of subgrade

OD309801/2022-2023:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as required including compaction, finishing and tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixed in concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

OD309800/2022-2023:Providing and fixing Granite of any color and shade for Name board , of required size laid over base of cement mortar 1:4 ( 1 cement : 4 course sand) including all charges etc. complete at all levels , including lettering & amp; fixing

Re-Tarring

5.5.A.1a:Modified Penetration Macadam 50 mm thick using Bitumen S-65 <br> Construction of penetration macadam over prepared base by providing a layer of compacted crushed coarse aggregate using chips spreader with alternate applications of bituminous binder and key aggregates and rolling with a three wheel 80-100 kN static roller to achieve the desired degree of compaction as per Technical Specification Clause 506.

5.2.1a:Tack Coat<br> Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.

5.11.1.A.2a:Mix Seal Surfacing - Manual Means - Type A - Bitumen S-65 <br> Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (Type-A) or 13.2 mm to 0.9 mm (Type-B) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical Specification Clause 509 <br> By Manual Means :- Type A <br> (II) Bitumen (S-65)

Road Concrete

OD309862/2022-2023: Scarifying metalled (water - bound) road surface including disposal of rubbish,lead upto 50 m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity.

OD309873/2022-2023:Filling with Quarry muck - Filling up low lying and water logged areas with local material / quarry muck ,spreading in layers ,levelling the top at side and consolidation by ramming etc complete for improving the CBR value of subgrade

OD309874/2022-2023:Providing Plain cement concrete for road work CC 1:2:4 (1 cement: 2 fine aggregate: 4 course aggregate) laid to required slope and camber in panels (@ 3 m c/c) as required including compaction, finishing and tamping etc .complete. Max. size of course aggregate not exceeding 25mm , mixed in concrete mixer etc complete as per specification (i) Nominal mix (1:2:4)

U V SIDHEEK

MP NIYAS

Bidder Name

MP NIYAS

U V SIDHEEK

MUSTHAFA P V