ANKANVADY NIRMMANAM

Royalty for good earth

Carriage of Good earth

Stone Aggregate(single size): 40 mm nominal size

Stone Aggregate(single size):20 mm nominal size

Carriage of Stone aggregate 40 mm nominal size and above

Carriage of Stone aggregate below 40 mm nominal size

Coarse sand (zone III)

Carriage of Coarse sand

Portland Cement

Carriage of Cement

Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper

Vibrator (Needle type 40 mm)

Sundries

Stone for masonry work

Through and bond stone size 24 x 24 x 39cm

Carriage of Soling stone & masonry stone

Stone Aggregate(single size): 10 mm nominal size

Twisted steel/deformed bars

Carriage of Steel

wall form panel 1250x500 mm

Corner angle 45x45x5 mm 1.50 m long

100 mm channel shoulder 2.5 m long

Double clip (bridge clip)

Single clip

M.S. Tube 40 mm dia

Carriage

Wall form panel 1250x450xmm

Corner angle 45x45x5 mm 2.50 long

Column clamp 450x1070 mm

Prop 2 m (2-3.5m)

Structural steel such as tees, angles, channels and R.S. joists

Steel

Red oxide Zinc chromate primer

Adjustable telescopic prop 3 m (2.02-3.75m)

Beam clamp 300-380 mm (450-1070 mm)

Second class kail wood in planks

Second class kail wood in scantling

Safeda ballies 125 mm diameter

Carriage of Timber

Adjustable span ESO+SI (2.35-3.40)

Solid blocks of size 30x20x15cm

Cement

Coarse sand

Solid blocks of size 30x20x20cm

Fine sand (zone IV)

Fine sand (1 part badarpur sand : 2 parts jamuna sand

Anjili wood scantls

Pincoda wood scantls

Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm

Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm

Bright finished or black enameled mild steel screws 40 mm

Bright finished or black enameled mild steel screws 20 mm

Anjili wood planks

Mild Steel round bar above 12 mm dia

Flats up to 10 mm in thickness

Rawl plug 50 mm (designation 10 nos)

Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm)

Oxidised mild steel tower bolt (barrel type) 200x10 mm

Oxidised mild steel screws 30 mm

Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles

Stone aggregate below 40 mm nominal size

Anodised Aluminium hanging type door stopper

Chromium plated Brass screws 25 mm

50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish

24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish

PVC pipe 50 mm outer dia. 10 kgf/cm2

PVC pipe 25 mm outer dia . 12 kgf/cm2

PVC pipe 110 mm outer dia 6kgf/cm2

Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers

Vitreous china pedestal type wate closet

Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe)

Vitreous China flat back wash basin 630x450 mm

15 mm C.P.brass tap

C.P. brass waste 32 mm

C.I. bracket for wash basin and sinks

Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm

Polyethylene water storage tank with cover and suitable locking arrangemnet

Material - 75 mm valve

Mild steel sheets for tanks

Mild steel plates

Pulley 25 mm dia

G.I. pipes 40 mm dia

Carriage of G.I. pipes below 100 mm dia

Welding by electric plant

Vitrified floor tile 50x50 cm

Carriage and sundries

Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc.

Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black

Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre

water proofing cement paint

Pink primer (for wood)

Multi surface paint

Special primer (C.W)

Water