eTenders

To Be Opened

Works

Electrical Works

Replacement of life expired, Power Supply distribution Panel, Feeder Pillars and cables at Sanchar Colony, Indira Nagar in Dehradun OA.

Bharat Sanchar Nigam Limited (Govt of India Enterprise)

Dehradun, Uttarakhand

Amount: ₹6.5 LCloses: 14 May 2026Closed

Timeline

Published30 Apr 2026
Closed14 May 2026
Bid Opening15 May 2026

Tender Value

₹6.5 L

EMD Value

₹13,014

Closing Date

14 May 2026, 3:00 pmClosed

Tender Inviting Organisation

Name

Executive Engineer (E)

Address

O/o Executive Engineer (Electrical) BSNL, Electrical Division 1st Floor, Telephone Exchange Laxmi Road, Dehradun

Work Description

Replacement of life expired, Power Supply distribution Panel, Feeder Pillars and cables at Sanchar Colony, Indira Nagar in Dehradun OA.

Tender Information

Tender ID

2026_BSNL_276194_1

Reference Number

09/EE(E)/BSNL/ED/DDN/26-27

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Item Rate

Period of Work

60 days

Location

Dehradun

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer tender documents

Documents Required

4 documents required · 4 mandatory

Fee/PreQual/Technical

RequiredScan Copy of tender cost and EMD (.pdf)

RequiredScan Copy of eligibility documents as per NIT (.pdf)

Finance

RequiredFinancial Bid No 09 (.xls)

RequiredPrice schedule duly filled up and signed (.pdf)

Fee & Financial Details

Tender Fee Amount

₹590

Tender Fee Exemption Allowed

Yes

Tender Fee Payable To

Accounts Officer (Cash), O/o GMTD, BSNL, Dehradun

EMD Fee Amount

₹13,014

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

30 Apr 2026

Published

30 Apr 2026

Bid Opening

15 May 2026

Download Starts

30 Apr 2026

Download Ends

14 May 2026

Submission Starts

30 Apr 2026

Clarification Period

30 Apr 2026 - 5 May 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (37 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Part -A
1.01	SITC of Powder Coated Double Door , free standing , Weather proof , Cubical type made of 16 SWG MS sheet , back closed Feeder Piller (Power Distribution panel) suitable for operation on 415V, 3 Phase ,50Hz AC supply ,consisting of following and as per specification attached I/c interconnection with suitable size Pvc insulated copper conductor cable .The Panel shall for suitable for Out door Installation with suitable shade to restrict entry of rain water i/c louvers on both sides to provide cross ventilation for air cooling and grouted the same in CC foundation with minor civil work etc as required.	-	-	-	-
1.02	INCOMING	-	-	-	-
1.03	(a) 250 A Rating 4 Pole MCCB with Breaking Capacity 36 KA , Ics=100% of Icu and thermal release range 200-250 A and Separator Terminals and 3 nos.LED indicating lamp set with individual MCB and wiring for phase indication complete as reqd. - 1 nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)	-	-	-	-
1.04	OUTGOING	-	-	-	-
1.05	a) 100 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 07 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)	-	-	-	-
1.06	(b) 0-500 V 96 mm x 96 m Digital type flush mounted voltmeter with in built selector switch-1 Nos.	-	-	-	-
1.07	c) 4 strip 1.00 Mtr long 250 amp alu bus bar-1 Set	-	-	-	-
1.08	d)50 X 50 x 6 (mm) size Angle iron base frame 500 mm Height above floor (04 legs) suitable to house the panel - This base shall be grouted in the floor made of 1:2:4 C.C. (cement concrete Plat for structure to be prepared by the agency)	2	Job	1,55,658	₹3,11,316
1.1	2.Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached and shall be offered for inspection at factory before despatch to site.	-	-	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.92 MB

Work Item Documents

BOQ_322570.xls

BOQ • 0.29 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Part -A
1.01	SITC of Powder Coated Double Door , free standing , Weather proof , Cubical type made of 16 SWG MS sheet , back closed Feeder Piller (Power Distribution panel) suitable for operation on 415V, 3 Phase ,50Hz AC supply ,consisting of following and as per specification attached I/c interconnection with suitable size Pvc insulated copper conductor cable .The Panel shall for suitable for Out door Installation with suitable shade to restrict entry of rain water i/c louvers on both sides to provide cross ventilation for air cooling and grouted the same in CC foundation with minor civil work etc as required.	-	-	-	-
1.02	INCOMING	-	-	-	-
1.03	(a) 250 A Rating 4 Pole MCCB with Breaking Capacity 36 KA , Ics=100% of Icu and thermal release range 200-250 A and Separator Terminals and 3 nos.LED indicating lamp set with individual MCB and wiring for phase indication complete as reqd. - 1 nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)	-	-	-	-
1.04	OUTGOING	-	-	-	-
1.05	a) 100 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 07 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)	-	-	-	-
1.06	(b) 0-500 V 96 mm x 96 m Digital type flush mounted voltmeter with in built selector switch-1 Nos.	-	-	-	-
1.07	c) 4 strip 1.00 Mtr long 250 amp alu bus bar-1 Set	-	-	-	-
1.08	d)50 X 50 x 6 (mm) size Angle iron base frame 500 mm Height above floor (04 legs) suitable to house the panel - This base shall be grouted in the floor made of 1:2:4 C.C. (cement concrete Plat for structure to be prepared by the agency)	2	Job	1,55,658	₹3,11,316
1.1	2.Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached and shall be offered for inspection at factory before despatch to site.	-	-	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Part -A

1.01

SITC of Powder Coated Double Door , free standing , Weather proof , Cubical type made of 16 SWG MS sheet , back closed Feeder Piller (Power Distribution panel) suitable for operation on 415V, 3 Phase ,50Hz AC supply ,consisting of following and as per specification attached I/c interconnection with suitable size Pvc insulated copper conductor cable .The Panel shall for suitable for Out door Installation with suitable shade to restrict entry of rain water i/c louvers on both sides to provide cross ventilation for air cooling and grouted the same in CC foundation with minor civil work etc as required.

1.02

INCOMING

1.03

(a) 250 A Rating 4 Pole MCCB with Breaking Capacity 36 KA , Ics=100% of Icu and thermal release range 200-250 A and Separator Terminals and 3 nos.LED indicating lamp set with individual MCB and wiring for phase indication complete as reqd. - 1 nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)

1.04

OUTGOING

1.05

a) 100 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 07 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens)

1.06

(b) 0-500 V 96 mm x 96 m Digital type flush mounted voltmeter with in built selector switch-1 Nos.

1.07

c) 4 strip 1.00 Mtr long 250 amp alu bus bar-1 Set

1.08

d)50 X 50 x 6 (mm) size Angle iron base frame 500 mm Height above floor (04 legs) suitable to house the panel - This base shall be grouted in the floor made of 1:2:4 C.C. (cement concrete Plat for structure to be prepared by the agency)

Job

1,55,658

₹3,11,316

1.1

2.Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached and shall be offered for inspection at factory before despatch to site.