Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 424A MADAPLATHURUTH MOOTHAKUNNAM NORTH PARAVOOR ERNAKULAM KERALA 683516 | ERNAKULAM | KERALA | 683516 | Admitted-Finance |
Tender Value
₹21.5 L
EMD Value
₹50,000
Closing Date
2 Jun 2022, 3:00 pmClosed
Executive Engineer
O/o the Executive Engineer Electronics Division Thiruvananthapuram
Supply and Installation of LAN and UPS for New Building at Central Polytechnic College, Vattiyoorkavu, Thiruvananthapuram
2022_PWD_489201_2
05/EEELSTVM/2022-23
Open Tender
Miscellaneous Works
Item Rate
60 days
Thiruvananthapuram
Please refer Tender documents.
9 documents required · 9 mandatory
₹2,750
₹50,000
3 Aug 2022
21 May 2022
4 Jun 2022
21 May 2022
2 Jun 2022
21 May 2022
Amount
Part I - LAN
Supply and Installation of Layer 3 manageable 24 port Ethernet Core Switch with 10/100/1000 Mbps ports, web manageable supporting ipv6 and having 24 x 1 Gigabit Ethernet + 4 10G SFP slots, Switching Capacity ≥:128 Gbps etc,RAM: 256 MB. AC 110/220V with Support for up to 4094 active VLANs simultaneously as per the requirement. Warranty: 3 Year Approved Make: CISCO, Juniper, HP, Allied Telesis, Netgear, Brocade.
Supply and Installation of Layer 2 Manageable 28 port Ethernet Switch which having 24 x 10/100/1000 Mbps + 4 x Gigabit SFP ports, web manageable supporting ipv6 having switching Capacity ≥ 20Gbps 256 MB flash memory, AC 120/230V. Warranty: 3 Year Approved Make: CISCO, Juniper, HP, Allied Telesis, Netgear, Brocade.
Supply and fixing 24 port Enhanced CAT-6 fully loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Molex, R&M, Honeywell or equivalent
Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover face plate with one number of RJ45 keystone socket in the existing CMS/PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M, Honeywell or equivalent
Supply and Installation of CAT-6 Information Outlet for 1000Mbps having spring shutter / dust cover dual face plate with 2 numbers of RJ45 keystone socket in the existing CMS/PVC Box including termination charges etc. Preferred Make: Actassi, Belden, Molex, R&M or equivalent
Supply, laying, certification and documentation of 23 AWG CAT-6 UTP cable through the existing conduit and cassing and capping/CMS as required. Preferred Make: Actassi, Belden, Molex, R&M or equivalent
Supply and fixing ≥100mm x ≥50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including Cable Divider, External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand or equivalent
Supply and fixing 50 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Accessories including External Angle 90°, Flat Angle 90°/TEE, Internal Angle 90°, Internal Coupler, Flat cross, End Cap, Flanged Coupler, Joint cover, Cable Retainer, Wall plate for internal angle etc. Preferred Make: OBO, MK, Legrand or equivalent
Supply and fixing of 25mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent
Supply and fixing of 20mm medium PVC ivory conduit/ oval conduit/ capping-n-casing with special confirming to ISI standard on surface/recess using suitable size fixtures spacing not exceeding 50cm including making good the damage colour washing etc as required Preferred Make: Toms, Balco, Espee or equivalent
Supply and Fixing 1 Module PVC Box on surface
Supply and Connecting 3Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent
Supply and Connecting 1Mtr CAT-6 Giga UTP patch cord. Preferred Make: Actassi, Belden, Molex, R&M or equivalent
Supply and fixing 19'' 9U Network Rack with ACDB 6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.
Supply and fixing 19'' 6U Network Rack with ACDB 6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.
Supply and fixing 19'' 23U floor mounting Network Rack with ACDB 6 port with 1U Slotted type Rack Mountable Horizontal Cable Manager Duct etc. Preferred Make: D-Link, HCL, Netrack, President, Valrack or equivalent.
Supply and Installation of 6 Core Single Mode Low Water Peak Outside plant (OSP) OFC having LSZH sheath, conforming to ITU-T G.655, IEC 60794-1 : 2001, IS 13882 (Part 1/Sec 1) : 1999 etc. Preferred Make: Commscope, Molex, R&M, Sterlite or equivalent.
Supply and Installation of IG Single Mode Duplex SFP module . Preferred Make: Cisco, Belden, Brocade, Aruba or equivalent
Supply and Installation of 19" 6 port rack mountable 1U size complete Steel housing fully powder coated Light Interface Unit (LIU) with required number of SC connectors having FR grade Nylon Cable grommets, ABS Splice Trays with fully cushioned splice holder containing grooves for fixing splice protection sleeves, Cable Spools made upof flame retardant plastic, high impact resistance, stackable design for providing sufficient room for storage of excess cables, Blanking plates, etc. Including splicing charges. Preferred Make: Commscope, Molex, R&M, Sterlite, AFL Hyperscale or equivalent.
Supply & providing SC-LC Duplex patch cord 1 mtr. Preferred Make: Commscope, Molex, R&M, Sterlite or equivalent
Supply and Installation of Pole with min 6mtr height, 60mm diameter, fixed in a concrete footing of min height of 1mtr, properly finished with painting and with all connecting accessories for Fiber laying
Supply and Installation of industrial standard 3mm diameter nylon stay wire
Supply and Installation of Dual band Wi-Fi Access points having following Specifications: Indoor Dual Band Wi-Fi Access Point with Frequancy : 2.4GHz and 5GHz, Wireless Mode: 5 GHz 802.11ax 2x2 MIMO for up to 1.2Gbps wireless data rate, with Multi User MIMO support (Wi-Fi 6), 2.4 GHz 802.11ax 2x2 MIMO for up to 574 Mbps wireless data rate (Wi-Fi 6), Uplink Gigabit Ethernet port, with PoE-in support, Antennas: Down-tilt omni-directional antennas for 2x2 MIMO with peak antenna gain 4.3dBi in 2.4GHz and 5.6dBi in 5GHz, Certifications: Wi-Fi Alliance certified (WFA) 802.11ax, with (Wi-Fi 6), WPA2, WPA3 etc. including all accessories such as power adaptor, wall /ceiling mounting kit etc. Preferred Make: Aruba, Cisco or equivalent
Supply and Installation of 10 port Auto sensing 10/100/1000 Mbps PoE+ L2 Manageable Switch having minimum 8 PoE+ port, switching capacity ≥ 20Gbps, minimum CPU memory 128MB dedicated PoE power delivery capacity ≥120W. AC 230V power input. Accepted Make: Cisco, Allied Telesis, Juniper, Brocade, Netgear
Supply and fixing 24 port Enhanced CAT-6 16port loaded Modular type Patch Panel as per EIA/TIA-TSB 40A specification for interconnecting servers and clients, including termination charges. Preferred Make: Actassi, Belden, Molex, R&M or equivalent
PART II - UPS
Supply, Installation, Testing and Commissioning of 10KVA On Line UPS having Inbuilt isolation transformer with ≥ 60 Min battery back up on full load with suitable Battery and Rack for keeping the battery. Warranty 3 year for UPS battery. Preferred Make: APC, Eaton, Emerson, Hykon, Igatech or equivalent
Supply, Installation, Testing and Commissioning of 20KVA on line UPS having Inbuilt isolation transformer with ≥ 60 Min battery back up on full load with suitable Rack for keeping the battery. Warranty 3 year for UPS and battery. Preferred Make: APC, Eaton, Emerson, Hykon, igatech or equivalent
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .