DEPOSIT ZILLA PANCHAYATH Laying 75mm PVC pipe line at Kainakary Grama Panchayath ward 1 Naduthuruth Kannittakayal near the house of Subash to Anganvadi No 117 Pipeline Work

Amount

working charge

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.6.1:Providing steel sheet shoring to the sides of the trenches to depths of above 4.00 m but not exceeding 6.00m using 6 mm M.S. sheet 0.50 M wide stiffen on edges with 50 mm x 50mm x 6 mm M.S. angles driving down vertically on either side one after another in lines and levels with suitable pile driving equipments and accessories to a maximum depth of 0.50 M below the bottom of the proposed excavation 0.5 M above ground level suitably braced by horizontal walling pieces at 75 x 150 mm x 8 mm angles on either side at intervals not exceeding 1.50M and horizontal screw jack type struts at 1.50M intervals and maintaining the shoring till the pipes are laid and works are completed, dismantling, cleaning and restacking for reuse including all labour, hire charges and conveyance for equipments, tools and plants and sundries etc. complete.

100.7.2:Bailing out water with engine and pump set above 5HP up to 10HP including conveyance to the site, erecting, dismantling and taking back of engine and pump, cost of fuel lubricating oil and other stores pay of staff etc., complete.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.11.7:Conveying and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc., but excluding cost of pipes and fittings for Internal work, Exposed on Wall: 65mm diameter nominal bore.

100.9.7:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 75 mm nominal outside diameter pipes.

OD277226/2023-2024:Interconnecting the newly laid 75mm PVC pipe line to the existing 63mmPVC line by cutting the existing line diametrically,the cut being diametrically perpendicular to the axis of the pipe and smoothening the cut ends and inserting the 63x63x63mm PVC Tee, placing in position.jointing and testing to the required test pressure including cost of Tee,&labour charges, hire for tools etc. complete including valve operation.

OD277316/2023-2024:Interconnecting the existing110/90/75/63 mm PVC line with the newly laid 75 mm PVC pipe by cutting the existing110/90/75/63 PVC pipe diametrically, the cut being diametrically perpendicular to the axis of pipe and smoothening of cut ends, inserting suitable specials such as Tee,Reducer /any other type supplied by the contractor and placing in position, jointing with solvent cement and testing to the required test pressure, including necessary earth work excavation, cost of specials supplied by the contractor, labour charges , and hire for tools etc; complete.Interconnecting with newly laid 75 mm PVC Pipe

100.98.222:Supply of PVC Pipe, 8kg/cm2, 75mm Dia.

OD277022/2023-2024:Supplying and installation of 65mm GI pipe

OD277897/2023-2024:Supply and installation of 90degree pvc bend

OD277898/2023-2024:Supplying and installation of 45degree pvc bend

OD278046/2023-2024:Fabricating of flanges -Details for Cost For 1 Nos Internal Diameter of Pipe 65.00 mm Thickness of Pipe 50.00 mm Outer Diameter of Pipe 165.00 mm Width of flange 165 mm Thickness of flange 50.00 mm Size of plate (equal size-square)165.00 mm Area of MS Sheet 0.027 m2 Weight of MS plate (60 mm) 393 Kg/m2 Weight of Sheet 12.82 Kg No.of bolt holes 20 Nos

4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 )1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size)

OD279067/2023-2024:Fabricating MS flanges of diameter 50 mm using 60 mm thick MS plate, all fabrication charges, charges for painting, Cutting and welding of 50 mm (I.D.) M.S. pipes for making bends and other specials by gas, grinding cut and weld edges of pipe during fabrication work including all labour and hire charge of tools, cost of CI air valve conforming to IS 14848 - 2000, DS2, Size 50 mm etc., complete.

OD281694/2023-2024:CI Air Valve, Conforming to IS 14848 - 2000, Double Orifice Type DS2, Size 50mm.

OD306315/2023-2024:Supply and installation of 65mm GM Valve including all cost of materials and labour etc complete

G RAJESH

Ratheesh

Bidder Name

Ratheesh

G RAJESH

CS.JOHN