REPAIR/MAINT OF HIGH MAST LIGHTS, STREET LIGHT FITTINGS AND CONNECTED WORKS UNDER GE (AF) JAMNAGAR NO.1

Amount

Taking down carefully street light/flood light fittings of any make and capacity, opening for examination & for replacement unservicable spare part and efixing the same in position after necessary replacement of drivers and minor spare parts at the same/other location,including any UG cable fault it will be rectified or replaced accordingly and necessary T&P like ladder/Boom Vehicle,tools etc as required for taking down & refixing of street light/flood light complete. Note :- Rate quoted by the tender is not inclusive of supply of drivers. The supply only of drivers where repaired shall be measured and paid separately under respective item No. 1.01 to 07.00 here-in after.

Supply only LED street light/flood light fitting driver of following capacity (Item No. 02.00 to 07.00).

LED Flood light fitting of capacity 200-250 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES..

LED Flood light fitting of capacity 120-170 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES..

LED Flood light fitting of capacity 90-110 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

LED Street light fitting of capacity 46-60 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES..

LED Street light fitting of capacity 70-90 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

LED Street light fitting of capacity 40-45 watt. Make:-crompton/philips/wipro/syska/havells/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED Street Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :-cat no. ENDURAPEARLMAGSL120WLED757PASYTOTGAST of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED Street Light fitting 90 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :-cat no. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED Street Light fitting 60 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :-cat no. ENDURAPEARLNEOSL60WLED757PASYTOPC of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED Street Light fitting 70 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting complete all as directed complete. Make :-cat no. ENDURACITYLINERNEOSL70WLED757PASYBOTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED flood Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. Make :- cat no. JETAIRISFLS120WLED757SYMLTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED flood Light fitting 160 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. Make :- cat no. JETAIRISFLS160WLED757PNBLTG of Havells equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED flood Light fitting 200 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. Make :-cat no. JETAVALOURFL200WLED757MODNBLTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES.

S&F in replacement of LED flood Light fitting 240 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, complete. Make :-cat no.JETAVALOURFL240WLED757MODWBLTG of Havells OR equivalent of crompton/philips/wipro/syska/C&S electric/HPL electric & power Ltd/HELONIX TECHNOLIES..

Note for Item No 01 to 15:- Necessary T & P as required for taking down & fixing of Street light / flood light fitting shall be provided by contractor without any extra cost to department.

Disconnecting & Taking out LT underground cable from trenches etc, aluminium conductor of size 10 sqmm 2 /4 core including cable cover all as specified and directed.

Disconnecting & Taking out LT underground cable from trenches etc, aluminium conductor of size 16 sqmm 4 core including cable cover all as specified and directed.

Disconnecting & Taking out LT underground cable from trenches etc, aluminium conductor of size 25 sqmm 3.5 core including cable cover all as specified and directed.

Laying only XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 10 Sqmm 2/4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete.

Laying only XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete.

Laying only XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable ISI marked with aluminium multistranded conductor 1100 volt grade of size 25 Sqmm 3.5 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 10 Sqmm 2 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 25 Sqmm 3.5 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

Supply, jointing connecting and testing, straight through joint, epoxy based complete with jointing material and all standard accessories suitable for XLPE insulated armoured aluminium conductor cable, LT 1100 Volts, aluminium conductor of 10/16/25 Sqmm suitable for 2/3.5/ 4 core all as specified and as directed by Engineer-In-Charge.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin Hard/dense soil.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil all as directed

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point.

M&L for providing dry river sand as in sand cushioning to under ground PVC cable including punning down of sand in layer all as specified and directed. (Note: Work shall be executed as per clause 19.75 of standard schedule of rates part-1 (2009) for measurement purpose thickness of sand after punning down will be considered.)

Laying only PCC cable cover for LT UG cable, of any description retrieved from item No.15 to 17 all as specified and directed.

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV , Type I , flat size 250 mm X 150 mm X 40 mm in trenches as protection to LT UG cable all as specified and directed.

S&F in replacement Tubes 40 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F in replacement Tubes 50 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

S&F in replacement of LED Aviation obstruction light fitting die cast aluminium alloy housing, heat resistant, clear thick glass and accessories with LED lamp & driver, fixed in position & connecting complete make:- cat log LTAL001 of C&S electric OR equivalent OF MAKES WIPRO/ PHILIPS / GEC

S&F in replacement of 4 Pole 32 to 40 Amp power contactor, AC 3 rating, fixed in existing panel & connecting complete all as specified & directED.

S&F in replacement Power saver and user friendly analog clock timer to set street light ON/OFF timing complete with stringment international test standards iec 61000-4-4,4-5,4-11,4-13,4-28. Make:-L&T/Legrand/Siemens/ABB/havells.

Material & Labour in replacement for sub main wiring with 2 run single core multistranded copper conductor cable, of size 1.5 Sqmm each, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through but not including PVC conduit/casing capping and including one run single core multistranded copper conductor cable, of size 1.5 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note: 2 Runs of main cable and one run earth wire will be measured as one unit for payment.

S&F in replacement of 20 mm bore UPVC pipe of pressure rating 4 kgf/cm ² inclusive of fitting etc fixed on pole / wall with mild steel clamps made out of MS Flat 25 x 6mm including, nuts, bolts at the interval of 1metre complete including two coat of synthetic enamel paint over a coat of red oxide primer complete.

S&F in replacement of Sheet moulding compound (SMC) junction box of size 350 mm x 200 mm x 150mm, comprising three phase aluminium bus bar and one No MCB SP, 06 Amps "C" type, fixed on pole with mild steel clamps, nuts and bolts complete. Make:-Sintex/Legrand/Siemens/EPP composite Pvt Ltd.

M&L for horizontal boring under roads / pavement / hard standing without disturbing the top surface by trench-less technology using ultra sound technique and necessary machine including supply & inserting of HDPE pipe of 90 mm dia suitable for 0.4 MPa working pressure for passing through the cables complete all as specified and as directed. Note : Necessary infrastructure required for boring shall be arranged by the Contractor at his own cost.

Supply and fix in repair earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected to and including galvanised mild steel strip 32x6 mm by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore galvanised iron medium grade and 40 mm bore galvanised iron light grade for earth strip protection including all.......

.....excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion. Note:-Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length,

Supply , installation, testing & commissioning, factory made, CPRI approved, outdoor type, LT Panel board of size 900mm 900mm x 450mm , confirming to IS 5039- with IP-54 protection, made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply mounted on and including MS angle section 60 x 60 x 6 mm frame with front and back openable, double door with provision of locking arrangement dust & vermin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & Consisting of the following equipments:-

(i) MCCB, 4 pole, 16 KA , 63 Amps with fixed thermal & adjustable magnetic setting -01 No. (ii) MCB, TPN, 10 KA, 32 Amps "C" series - 02 No (outgoing) (iii) Mounting arrangement for 2 MCB for future Expansions. (iv) Power Contactor MNX70 of Make: L&T or Equivalent of makes in appendix "B". (v) Digital type/analog clock timer time switch of Make; L&T/legrand/Siemens/ABB/Havells. (vi) Solid aluminium bus bar 200 Amp for 3 phase , 100 Amp for neutral (vii) Reverse forwarding switch for lifting and lowering of high mast light fitting alongwith brackets

M&L in repairs Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint

M&L preparation of old painted surfaces of RCC street light pole 9 meter long above coping including cross arm etc and applying one coat of weather proof exterior emulsion paint as per the existing colour or as directed by Engineer-in-Charge on RCC pole and applying one coat of synthetic enamel paint for service brackets and MS clamps of light fittings including painting with synthetic enamel paint up to 1.2m from bottom in alternate layers of tri-colour of black,yellow& white and numbering of poles in white paint over the black base complete all as specified and directed.

M&L preparation of old painted bottom surface of RCC street light pole of any size for making up to 1.2 mtrs alternate layers of tri-colour of black,yellow & white with one coat of synthetic enamel paint along with numbering of poles in white paint over the black base complete all as specified and directed.

M&L for preparation of old surfaces & painting of steel tubular pole of up 9 mtr height with two coats of synthetic enamel aluminium paint on pole, cross arms, bracing , clamps GI pipe fittings etc with bottom 1.2m portion painted in alternate layers of tri-colour of black,yellow& white including numbering of poles in white paint over the black base complete all as specified and directed.

Supply and fix in replacement of LED Bollard garden light fitting,IP 65/IK 10 protection, with base plate and necessary foundation and connected electric and PCC works complete. Make :-cat no. BAMBOOBLS8WLED857PSYMTOPC(1M) of HAVELLS OR EQUIVALENT OF Crompton/Philips/Wipro.

Supply and fix in replacement of LED Post-Top lantern, energy saving, environmental friendly, long life aesthtically designed with symmentrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source ,suitable for pole size and making arrangements ,pcc work , electric connections complete. Make :-cat no. RUBYPT35WLED757PSYMTOPC of HAVELLS OR EQUIVALENT OF Crompton / Philips / Wipro / CG / BAJAJ

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor twin core 4 sqmm,weather proof,flat or circular served with inner sheathing of PVC tape and overall PVC sheathed in service connections all as specified and directed.

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor twin core 6 sqmm,weather proof,flat or circular served with inner sheathing of PVC tape and overall PVC sheathed in service connections all as specified and directed.

Supplying and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor twin core 10 sqmm,weather proof,flat or circular served with inner sheathing of PVC tape and overall PVC sheathed in service connections all as specified and directed.

Supply and erect in replacement Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom, class 10 Note:- (a) Rate quated is inclusive of following (i) Excavation&Earthwork ,Returning filling and Removal of soil (ii) PCC (1:3:6) type c2 as per specification (iii) Coping (1:2:4) type b1 as per specification.

Supply and erect in replacement Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 METERS LONG) Note:- (a) Rate quated is inclusive of following (i) Excavation&Earthwork, Returning filling and Removal of soil (ii) PCC (1:3:6) type C2 as per specification (iii) Coping (1:2:4) type B1 as per specification.

Supply and fix in replacement MCBs four pole , 40 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix in replacement MCBs single pole & neutral , 20 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix in replacement MCBs single pole , 6 to 32 Amps, 230 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

Supply and fix in replacement MCBs triple pole & neutral , 63 Amps, 415 volts with ‘C’ curve, fixed in sheet metal board complete including connecting.

M&L for Repairing of 1.5 HP capacity electric motor of high mast, AC 3 phase, by dismantling the motor cutting and taking out the old winding wires, cleaning the slots, rewinding the motor with appropriate size of super insulated copper conductor winding wire of same gauge, and varnishing complete including replacing the worn out bearing, reassembling the motor and fixing in same position and testing complete all as specified and directed.

S&F in replacement of 1.5 HP capacity electric motor of high mast, AC 3 phase, by dismantling the motor & fixing the new motor in same position and testing complete all as specified and directed. Make:-kirloskar/crompton/ABB/Lubi/havells.

S&F in replacement of Lantern carriage, made out of Hot Rolled Medium and High Tensile Structural Steel (as per manufacturer design) confirming to IS 2062 -2011) provided with rubber gasket internally for easy movement. Lantern carriage shall be suitable to fix 9 to 12 Nos of luminaries (LED flood lights) symmetrically in 06 welded arm. complete all as specified and directed. Make:-Bajaj/crompton Greaves/Wipro.

S&F in repair Winch sutable for taking minimum 750 kg load. should have double drum, (Gear Ratio - 50 : 1) motor driven / manual driven, self lubricating. Make:-Bajaj/crompton Greaves/Wipro.

Supply and fix in repairs PVC insulated and sheathed trailing cable copper conductor cable of size 2.5 Sqmm 5 core, EPR PCP round cable 1100 volt grade.

M&L for Servicing of complete high mast of any make, model, cap, height by greasing of wire rope, winch, motor , making proper connection of light fittings in lantern carriage, cleaning & making proper connection of High mast panel all as specified and directed.

S&F in repair wire rope of high mast light from winch to top made out of stainless steel grade AISI 316 suitable for taking min 750 kg load.

S&F in replacement of mounting bracket for street light fittings made out of GI pipe light grade 40 mm dia upto 1.5 m length bent to shape incl fixing arrangement with neccassary clamps, bolts, nuts, washers etc .

S&F in replacement of mounting bracket for street light fittings made out of GI pipe light grade 50 mm dia upto 1.5 m length bent to shape incl fixing arrangement with neccassary clamps, bolts, nuts, washers etc

Sukhi Electricals

Nirmal Construction

Hirachand Sunderji and co

M/s SK Traders

jitendra c joisar