Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.9 LAccepted-AOC | L1 | Accepted-AOC Successful Bidder | |
| 2 | L2₹10.0 L+₹14,805.28 (1.50%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful Bidder | |
| 3 | L3₹10.1 L+₹21,076.58 (2.13%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful Bidder | |
| 4 | L4₹10.1 L+₹23,081.32 (2.33%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful Bidder | |
| 5 | L5₹10.2 L+₹30,898.50 (3.12%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful Bidder |
Tender Value
₹9.5 L
EMD Value
₹19,000
Closing Date
6 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) AGARTALA
AGE (I) AGARTALA PIN 901184 C/O 99 APO
PROVN OF MORPANKHI LAKE HUT AT MOI AND PROVN OF PCC HARD STANDING IN FRONT OF BLDG T-566 AT MIL STN AGARTALA
2022_MES_536733_1
8283/E8
Open Tender
Civil Works
Item Rate
180 days
AGARTALA
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) AGARTALA
₹19,000
Yes
16 Aug 2022
9 Jul 2022
8 Aug 2022
9 Jul 2022
6 Aug 2022
23 Jul 2022
Amount
Schedule'A' Part-I: B&R works
Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil.
M & L hard core of gauge n. exc 63mm, deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surfaces in broken bricks.
M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate
M&L for M-25 , 20 mm aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete
Formwork to sides of concrete foundations, footings, bases of columns, raft & raft beams, sides & soffits of foundation & plinth beams; and similar work; verticle or to batter Rough finished surfaces of concrete flat
M&L RCC M-25 design mix using 20 mm graded aggregate in Columns, pillars, piers, posts and struts using suitable admixture in suitable proportion. Note-Admixture shall be measured and paid seperately.
M& L for Fair finished circularon plan Form work to sides of pillars, posts, struts, columns and stanchions
M&L RCC M-25 design mix using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span
M&L for Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat
M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat
M&L for TMT bars 10 mm dia and over, cut to lengh, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item ser No. 14 but as in stirrups, spacers and binder, 8mm dia TMT bar
Brickwork with old size subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6)
Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil.
Removing excavated soil exc 250m but n exc. 500m & depositing where directed at a level n exc. 1.5 m above the starting point
M & L 15mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out suing extra cement.
M&L for applying two coats of cement base paint, white or tinted on new wall surface including preparation of surface.and Chalk whitening complete all as specified and as directed
S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6)
S&F Rolled Steel Sections as in tubular trusses, including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
S&F MS steel Hollow section Square/rectangular as in purlins, rail etc etc complete butt welded tubes conforming to IS 1161-1979 grade St -240 and painted one shop coat of zinc chromate primer paint including preparation of surface at contractor workshop before fabrication complete all as specified and directed.
S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes ,without and attachment of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.
S&F Mild steel bolts. purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Dia of bolt 16 to 20mm and length exc 25cm long and n exc 30cm complete as specified.
S & F pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/ eaves board fixed with selp tapping screw complete all as specified and directed.
S & F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding/eaves board fixed with selp tapping screw complete all as specified and directed.
Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome
S & F 6 mm thick non asbestos fibre cement boards fixed as in ceiling with & including GI snap grid frame work, comprising of main aluminium of size (23.5x36.5x1.8mm) and secondary type of size 23.5x23.80x1.28mm alongwith span with the help of aluminium angle of size 23.5x36.5x1.6mm fixed to wall for false ceiling including necessary supporting hanger with 6.0mm dia GI wire with 'J' bolt washers nuts for securing frame work to ceiling suspended @ 1.20m both way of grid shall be 610x610mm etc applying two coats of oil bound distempering over a coat of chalk whitening including preparation of new surface on ceiling complete as directed and as specified.
Surface excavation n.exc 30cm deep & averaging 15cm deep and getting out in soft / loose soil.
M&L Machine pressed precast concrete interlocking paver block any colour,shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over 50mm thick sand cushion layer and pointed in white or .coloured cement with pigment to match complete all as specified and as directed
M& L Providing cement concrete in Type B0 1:2:4 (12.5 mm graded stone aggregate) as in copings, water throughs and the like including weathering, slightly rounded or chamfered angles andf throating complete all as spcifiecd
M&L 100 mm thick Cement concrete type D-2, 1:4:8(40 mm graded stone aggregate) for base, all as specified and directed.
M&L for 50 mm thick PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 38 mm width Glass dividing strip of 3mm thick used in PCC floor, all as specified and directed.
NOTES :- 1. The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule A notes for details.
M/S New Saha Enterprise
M/S C.S.P. ENTERPRISE
M/S SANKAR GOPE
M/S UTTAM GANGULY ENTERPRISE
SHRI SUBRATA GUHA
M/S PRITAM ENTERPRISES
SHRI RAJESH DEY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .