Const. of paver block road and one side from the Kathiababa College to H.O Satyendra Deb under ward no.03, AMC

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil

Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - -All work upto plinth level: 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggegate 20 mm nominal size)

Half brick masonry work with first class bricks infoundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).

First class brick work in foundation and plinth including cost of all materials as required complete. In cement mortar 1:4 (1 cement : 4 fine sand).

12 mm cement plaster of mix cement mortar 1:4 (1 cement : 4 fine sand). Neat cement punning.

Providing and laying dry flat brick flooring in required pattern complete.

Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m

80 mm thick factory made c.c. interlocking paver block of M-35 Grade.Providing and laying factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method to attain superior smooth finish using PU or equivalent moulds, laid in required grey colour & pattern over 50 mm thick compacted bed of sand, compactingand proper embedding/ laying of inter locking paver blocks intothe sand bedding layer through vibratory compaction by usingplate vibrator, filling the joints with fine sand and cutting of paverblocks as per required size and pattern, finishing and sweepingextra sand in footpath, parks, lawns, drive ways or light trafficparking etc. all complete as per specifications & approval/ direction of the Engineer -in-Charge:(a) 80 mm thick c.c. paver block of M-35 grade with approved colour, design and pattern.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -All work upto plinth level:1:2:4 ( 1 Cement: 2 fine sand : 4 graded stone aggregate 20 mm nominal size)