Restoration of Rain damages on Baroh Chowk dehrian jandrah Talli Tikka Lagru Dolla Kharyana Khundian Nahallian road at Km 35/300 to 49/400

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains of soil in all kinds of soils, soft and hard rocks and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, including shoring, strutting or bailing out water upto any depth or any height quantum of water including de-watering removal of slush and stacking the serviceable and un-serviceable material clear from the edge of excavation as per direction of Engineer-in-Charge and returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all excavated earth including carriage of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete Grade M-10 (M-Ten) nominal mix 1:3:6 (One cement isto three sand isto six graded crushed stone aggregate 20mm (Twenty millimeter) nominal size), in or under water in open foundation for all type of structure and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying under water for all heights/depths and any quantum of water, including cost of form work and curing complete for 14 (fourteen) days and as per drawing and MORD Technical specification section 800, 900 & 1200 and as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:5:10 (one cement isto five sand isto ten graded crushed stone aggregate 40mm (forty millimeter) nominal size) for plain cement concrete, in or under water in open foundation for all types of structures, including pumping or bailing out water/ dewatering (surface/sub-soil water) and including removal of slush which may arise at the time of laying under water for all heights/depth and any quantum of water including cost of form work and curing complete as per drawing and MORD Technical specification 802, 803, 1202 & 1203 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of material with in all leads lifts and other incidentals. The rates including Royality, Malkhana, Octroi, Toll tax, Sale tax, GST or any other taxes imposed by the Government.

Providing and laying 100mm (one Hundred millimeter) dia ISI marked VECTUS /FINOLAX P.V.C. pipe ( working pressure not less then 4 Kg per sequre cm) Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1(V): 20H (One vertical isto twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614,709,1204.3.7 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Providing and Laying filling Behind Retaining Wall with Approved Granualr mterial as per specification to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to full height compacted to firm condition completeas per drawing and technical specification clause 1204.3.8 and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates including Royality, Malkhana, Octroi, toll tax, sale tax, GST or any other taxes imposed by the Government.

Removal of Land Slide in Hilly area ordinary rock not requiring blasting by mechancial means including cutting and trimming of slops and disposal of cut material with all leads and lifts as per direction of the Engineer-in-charge as per HPPWD specification as per HPPWD Specification, including carriage of all labour equipments and materials to various location through all modes of transporation in all leads of, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, sales tax, GST or any other taxes imposed by the Government.

Construction of unlined surface drains of average cross sanctional area 0.40 sqm in soil to specified lines, grades, levels and dimension. Excavated material to be used in embankment with a lift upto 3m and lead of 50m (average lead 25m) as per Technical specification Clause 307 Manual means) in all leads of, lifts and other incidentals. The rate is including Royality, Malkana, Octroi, toll tax, sales tax, GST or any other taxes imposed by the Government.

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 mm (six hundred millmetre) circular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board 600 mm (six hundred millmetre) equilateral triangular board as per IRC:67 made of 1.5 mm (one point five millimeter) thick MS Sheet duly stove enameled paint in white colour in front and gray colour on back with red reflective border of 65mm (sixty five millimeter) width and required letters and figures with reflective tape engineering grade of required shade and colour supported and welded on 47mmx47mm (Forty seven millimeter into forty seven millimeter) of 12 SWG sheet square tube firmly fixed to the ground by mean of properly designed foundations with M-15 (M-fifteen) grade cement concrete 450x450x600 mm, (four hundred fifty into four hundred fifty into six hundred millimeter) 600mm (six hundred millimeter) below ground level as per drawing and MORD technical specification section 1700 including painting angle iron post with primer and two coats of epoxy paint and as per direction of Engineer-In-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including Royality, Malkana, Octroi, toll tax, GST or any other taxes imposed by the Government.

Providing and Fixing Glow stud of size 100x20 mm (one hunded in to twenty milimetre)made of heavy duty body shall be moulded ASA (Acrylic styrene Acrylretrite) or HIP (High impect polystyrene) or ASB having electronically welded micro-prismatic lens wih abrasion resistant coating as aproved by Engineer-in-Charge. The glow stud shall suported a load of 13635 kg. tsted in accordanc wih ASTM D4280. The slope of retro-reflective surface sall be 35(+/-5) degree to base. the reflective panels on both side with at least 12 cm (Tewelve centimetre) of refelective area up each side. The Luminance intensisty should be as per the specification and shall be tasted as per described in ASTM I: 809 as reccommended in BS: 873 part 4:1973. The stud shall be fixed to the Road surface usein the adhesive conforming to IS(Indian Standred) as per procedure reccommonded by the manufacturer complete and as per direction of Engineer-in- Charge including carriage of materials and equipment with all mode of transportation and as per direction of Engineer- in- Charge including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.