Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹12.9 L+₹1.2 L (10.5%)Rejected-AOC | L2 | Rejected-AOC Higher rate hence rejected | |
| 3 | L3₹14.2 L+₹2.5 L (21.3%)Rejected-AOC | L3 | Rejected-AOC Higher rate hence rejected | |
| 4 | L4₹14.9 L+₹3.2 L (27.2%)Rejected-AOC | L4 | Rejected-AOC Higher rate hence rejected |
| Sl No | Description | Qty | Unit | RADHAKRISHNAN NAIR.D L1 | JOSE A L3 | JAYACHANDRA KUMAR B L4 | RAJAN PILLAI D L2 |
|---|---|---|---|---|---|---|---|
| 1.00truss roof work | |||||||
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 610.4 | kg | 144 ₹87,897.6 | 121 ₹73,858.4 Lowest | 185 ₹1,12,924 | 159 ₹97,053.6 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 4,578 | kg | 150 ₹6,86,700 Lowest | 192 ₹8,78,976 | 190 ₹8,69,820 | 165 ₹7,55,370 |
| 1.00 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 436 | sqm | 653 ₹2,84,708 Lowest | 850 ₹3,70,600 | 834 ₹3,63,624 | 715 ₹3,11,740 |
| 1.00 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 49 | metre | 436 ₹21,364 Lowest | 700 ₹34,300 | 560 ₹27,440 | 508 ₹24,892 |
| 1.00 | OD411616/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including
fitting with 32mx5m MS flat supporters at 1m interval etc. complete | 39 | metre | 833 ₹32,487 | 459 ₹17,901 Lowest | 1,068 ₹41,652 | 970 ₹37,830 |
| 1.01 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.28 | cum | 7,138 ₹9,136.64 Lowest | 8,091 ₹10,356.48 | 9,145 ₹11,705.6 | 8,311 ₹10,638.08 |
| 1.01 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 2.92 | cum | 6,131 ₹17,933.18 Lowest | 7,500 ₹21,937.5 | 7,850 ₹22,961.25 | 7,138 ₹20,878.65 |
| 1.01 | 4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts | 35.36 | sqm | 780 ₹27,580.8 | 250 ₹8,840 Lowest | 998 ₹35,289.28 | 907 ₹32,071.52 |
Tender Value
₹15.1 L
EMD Value
₹37,779
Closing Date
10 Feb 2026, 5:00 pmClosed
ASSISTANT ENGINEER,LID AND EW, ENADIMANGALAM GP
Office of the Assistant Engineer, LID AND EW Section, Enadimangalam Grama Panchayath
ENADIMANGALAM GRAMA PANCHAYAT 2025 - 26 - 116/2025-26 -CONSTRUCTION OF NEW CONFERENCE HALL-THIRD FLOOR (TRUSS ROOFING)
2026_LSGD_832612_1
03/AE/LSGD/END/2025-26
Open Tender
Civil Works - Buildings
Item Rate
90 days
ENADIMANGALAM GP
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹37,779
Yes
18 May 2026
3 Feb 2026
12 Feb 2026
3 Feb 2026
10 Feb 2026
3 Feb 2026
truss roof work
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes
12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm)
OD411616/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc. complete
4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
4.3.3:Centering and shuttering including strutting, propping etc. and removal of form work for:Columns, piers, abutments, pillars, posts and struts
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1399638.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.28 MB
Tendernotice_2.pdf
PDF • 0.02 MB
Tendernotice_3.pdf
PDF • 0.02 MB
BOQ_1399638.xls
BOQ • 0.30 MB
PRELIMINARY.pdf
Tender Documents • 0.01 MB
biddochall.pdf
Tender Documents • 1.65 MB
AFFIDABET.pdf
Tender Documents • 0.01 MB
fot1.pdf
Tender Documents • 0.01 MB
nitfeb.pdf
Tender Documents • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .