SPL REPAIRS TO 36 NOS SERVANT QUARTERS OF OFFICERS MARRIED ACCN AT POLO VIEW AND TONS VIEW IN NORTH COMPLEX AT IMA DEHRADUN

Amount

Dismantling Asbestos cement (corrugated or semi corrugated etc) sheets in roof covering complete all as directed.

S&F Pre-painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall crimped at end (min crimping 450mm), fixed with self tapping screws etc fixed in repairs complete all as directed. Make - Tata Blue Scope / JSW Steel Color On+ / Charminar

S&F Pre-painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall, ridges fixed one end to wall with screw/fasteners with washers and wall plug at the distance of min 300 mm and another end to corrugated sheet fixed with self tapping screws etc and gap between wall to sheet shall be sealed with silicone fixed in repairs complete all as directed by Engr-in-charge. Make - Tata Blue Scope / JSW Steel Color On+ / Charminar

S&F Rolled structural mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.(Fe-410-W(Gde E- 250) quqlity B)

Providing & fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRC 0.60 to 0.75 as per IS 8225 :1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 00.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm , cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of szie 15x32mm of length 600mm to form grid module of size 600 x600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-In-Charge with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. Make – Armstrong,Gyproc,Diamond International Inex Pvt Ltd(Brand- Diamond Ceiling), USG Boral.

Demolition of brick work, built in cement or cement lime mortar including removal outside from IMA Premises.

M&L for Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks (except bricks) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick or stone walling built in Cement Mortar including raking out joints hacking for key scrubbing down with water etc and removal outside from IMA premises complete all as specified and directed.

M&L for 15mm thick ready mix external plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom).

Preparation of newly plastered surface of wall / ceilling and applying 1mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instructions using mechanical means complete all as specified and directed.

Preparation of puttiyed surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer by mechanical means complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls using mechanical means complete all as specified and directed.

Preparation of old plastered surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Cement based paint by mechanical means complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of primer by mechanical means complete all as directed.

Demolition of cement concrete in ground floor and paving nexc 15cm thickness (below or above ground level) including removal outside IMA premises.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection or similar places, and finishing the surface even and smooth without using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meters and at every change of direction and filling the same with sealing compound grade 'A' including necessary formwork etc concrete complete all as specified and directed

M&L for PCC 1:4:8 type D-2 (using 40 mm graded crushed stone agg) as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

S&F 30cm x 30cm x 22-25mm thick heavy duty Chequered cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6 laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed. Make - Sagar Tiles / Tulip Tiles / Crystal Tiles.

M&L for PCC 1:2:4 Type B-1 {using 20mm graded crushed stone aggregate} as in coping/benching including weathering, slightly rounded or chamfered angles and throating etc including necessary form work complete all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each complete all as specified and directed

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area .exc 1.50 Sqm and n exc 4.00 Sqm each complete all as specified and directed

Taking down steel window shutter n.exc 1Sqm and refixing in the same opening after replacement of broken hinges including welding,grinding, painting etc each complete all as specified and directed

Taking down shutter of any description n exc 1 Sqm each complete all as specified and directed

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed

S&F 2nd class, hard wood, plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed

Preparation of wood or wood based materials new or old of any description and girth and treated with two coats of creosote complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embedding hold fasts complete all as specified and directed

S&F MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed

S&F Mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing and similar work complete all as specified and directed

S & F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing in SSR, color as approved by GE complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc color as approved by GE complete all as specified and directed

S & F factory made 30mm thick flush shutter solid core construciton with partical board core and plywood face panels commercial type on both sides complete all as specified and directed

S&F factory made 35mm thick 2nd class H.W. factory made glazed and skeleton shutter, open rebated and prepared to receive glass, gauge etc divided into squars, with plain chamfered or rounded, mitred and rebated sash bars, any numbers fitted with cut and mitered beads for securing glass/gauze etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed

S & F Steel window factory made with side hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed as per drg No TD 088 Sheet 1/17 to 17/17.

S&F 3mm thick sheet glass ordinary quality type & glazing with wooden/steel beads/oil putty in squares not exc 0.5 Sqm in each pane, complete all as directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples in repairs complete all as specified and directed

Preparation of old painted wooden surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of old painted steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed.

Preparation of new wooden surface of any description over 10 Cm width and girth and applying two coat of synthetic enamel paint over a coat of pink primer using mechanical means complete all as specified and directed.

Preparation of new steel surfaces of any description over 10 Cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15mm bore of pipe.

S & F15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete all as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20mm bore of pipe.

S & F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete complete all as directed.

S&F Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

S&F PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed. Make - Cera / Parry ware / Jaquar.

S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Drapery rod in any length, high strength stain less steel pipe with corrugated stain less steel extrusion having outer dia 28mm a pair of brackets, fixed in repairs complete all as specified and directed.

S&F Decorative finals stainless steel in matching colour of rod, fixed in repairs complete all as directed.

S&F 500 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed.

S&F Ball valve 15mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as specified and directed.

M&L for 20mm thick screed bed in Cement Mortar 1:4 on roof surface finished even and smooth including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc.complete all as specified and directed.

Repairing to existing door/window chajjas upto 3.0m span and width 1.0m by demolition/ scrapping of damaged portion and preparing the surfaces by providing 50mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate including finishing the surface by rendering 10 mm thick plaster in Cement Mortar 1:3 and finished even and smooth surface using extra cement over concrete surface and PCC benching including weathering slightely rounded or chamfered angles and throating over and and complete making good existing disturbed surface all as specified and directed (work to be carried out upto a height of 7.5 m and rate shall be inclusive of all necessary scaffolding and shuttering). Note: Reinforcement if required shall be measured and paid separately under respective.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L for 15 mm thick screed bed or bedding layer of cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in Cement Mortar 1:6 for receiving wall tiles.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour tile grout to match complete all as directed.

M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in vertical surface such as skirting dado and riser to step floor etc set and jointed in neat cement slurry and pointed in same color tile grout to match complete all as directed.

M&L for Glazed ceramic coloured tiles of size 450x300x7-8mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in same color tile grout to match complete all as directed.

S&F in repairs Grating square fitting of size 150mm made in two parts for smell and mosquito proofing with hole for waste pipe complete all as specified and directed.

S & F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with band fixed in repairs complete all as specified and directed.

S&F in repairs PVC bends fitted with oval access doors 110 mm dia any radius diminishing pieces or tapers fixed in repair complete all as specified and directed.

Desludging/cleaning of open drain of any depth by mechanically means and burring the sludge into the ground complete all as specified and directed.

M&L in repairs for 18/19mm thick one side prelaminated colour WPC Sheet for Kitchen cup board shutter and frame & fixed at site, colour as approved by E - in - Charge complete all as specified and directed. Note :- Board edges properly finished with strip on band edges. Make- Ecocell, Black Cobra, Raj Shree

S&F Auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

S&F Stainless steel handles 100 mm size for kitchen cabinet shutters fixed in repair complete all as specified and directed. Make :Hexa, Hettich, Hafele

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including cutting chasing in brick work and half rounding of marbel in front face of self including taking down existing shelf and cutting chasing and repair for inserting marble shelfs complete all as specified and directed.

M&L for 100mm thick Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in floor including demolition of existing old concrete complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.

Taking down old U/S main switches, Sheatmetal enclosures DB including MCCBs, MCBs etc including making good to the disturbed surface of wall all as directed.

Taking down old unsv T/L, Lamp,Security light of any size and capacity all as directed.

Taking down carefully submain wiring including all accessories without disturbing existing wiring fittings fixtures etc and making good to the disturbed surfaces all as directed and as specified in any type and size all as directed.

Material and labour for point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in existing conduit with all fitting and fixing accessories and 1.5 sq mm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes 1.6 mm thick, 60 mm deep of required size factory made for mounting switch, regulators etc with and including 3 mm thick plastic hylam laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches, sockets etc complete for the following. Make of wire:- Grandlay, Anchor, Polycab. Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box. (iii) All screws, fasteners, bolts, nuts & washer shall be cadmium plated & the cost of which is deemed to be included in the quoted unit rates. Make of PVC Conduit:- AKG, Bhagwati Plastic, Polycab.

One light point controlled by one, one way switch 5 Amps

One fan point point controlled by one, one way switch 5 Amps .

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board.

All as per item No 76 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

Supply and fix Switch piano, flush type, single pole one way, 5 Amp complete all specified and as directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and fix Switch piano, flush type, single pole ,one way15 Amp complete all specified and as directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 5 Amp complete all specified and as directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and fix Socket outlet, multipurpose, 2 in 1, 5 pin, 15 Amp complete all specified and as directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and fix Electronic step rotary type fan regulator 100W, 230 volts AC 50Hz complete all as specified and directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and fix lamp holder PVC /Polycarpebonated type with back plate suitable for batten fittings all as specified and directed. Make: Anchor, Crab tree, Ess Ess Kay.

Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay.

Supply and Fix in repairs LED bulk head fitting wall mounted fitting of lumens 1000 lumens ,Single Piece body Die cast lluminium ,System efficacy 100 Lm/Watt Polycarbonated Cover for More protection , fully diffused ,Epoxy powder coated with any additional treatment for smooth and anti corrosive finish, IP-66 and IK-08,high bright LED lamp, colour temp not less than 6500 Cool Day Light,colour rending index not less than 80 ,life not less than 50000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270 V AC, 50 Hz, surge protection minimum 2.5 KV including connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv light fitting complete all as specified and directed. Make: - PHILIPS /Bajaj/JAQUAR/Havells

Supply and Fix in repairs LED batten light fitting 4 feet of lumens 2500 lumens, wall mounted ,high pressure die cast alluminium, fully diffused ,system efficacy 125L/W ,polycarbonated diffuser,IP-20 ,high bright LED lamp, colour temp not less than 5700 Cool Day Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 10 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including,connected the same with using PVC sheathed , insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv Tube light fitting complete all as specified and directed . Make: - PHILIPS /Bajaj/JAQUAR/Havells

Supply and Fix in repairs LED batten light fitting 2 feet of 1000 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,system efficacy 100L/W,polycarbonated diffuser, IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV including connected the same with using PVC sheathed, insulated 3 core flexible 23/0.0076 copper cable including fixing arrangement for fixing the light fitting to ceiling rose including taking down old unsv Tube light fitting complete all as specified and directed . Make: - PHILIPS /Bajaj/JAQUAR/Havells

S & F sub main wiring 2 x 4 + 1x 4 Sqmm with 2 run PVC insulated unsheathed FRLSH cable 1100 Volt grade, with multi stranded copper conductor drawing in existing Concealed conduit including one run PVC insulated unsheathed cable with multi stranded copper conductor as a earth continuity and connected upto DB of following sizes complete all as specified and directed. Note:Two run of single core PVC cable with one run of earth conductor & condiut shall be measured as one unit. Make of wire:- Grandlay, Anchor, Polycab, SCI.

S & F MCB DB SPN 8 ways complying with IEC 61439 -1 & 3., sheet metal enclosures double door .The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts 2 in 1 shutter (Metal Door) with IK09 type with blanking plates where required and IP 43 degree protection, the DB door should be hinged type and possible to reversible at site.The DB door shall have overhang, to gel with wall properly.The DB shall be supplied with all insulated N. Bar riveted on Din channel frame and should not restrict cable entry from top or bottom.The DB shall have plastic knobs on shield to hold complete all as directed. All the above mentioned specs the technical documents from OEM shall be provided at the time of bidding of following capaity . Make: - Havells,Indo Asian,HPL .

S & F MCB SP /SPN complying to IS/IEC 60898, 240 volts 'C' Curve 10 KA with energy limiting class 3. The MCB shall have 50% lower watt loss as required by IS/IEC 60898 from 6A to 63A . The mcb shall have the unique property of di-electric strength, arc resistance, insulation, flame retardancy and temperature resistance, including connection with suitable size copper lugs, The MCB shall give visible flag indication when MCB trips on Short Circuit Fault. The MCB shall have safety shutter to avoid any wrong insertion of cable. The MCB shall have the termination capacity of 35 Sq mm. The MCB shall have electrical life 20,000 operations up to 32A and 12,000 operation up to 63A including connection with suitable size copper lugs complete all as directed. All the above-mentioned speification/ technical documents from OEM shall be provided at the time of bidding of following capaity. Make: - Havells,Indo Asian,HPL

MCB SP 240 volts, 50 Hz capacity 6-32 Amps

MCB SPN 240 volts, 50 Hz of capacity 40 Amps

S & F LED lamp 12 W suitable for Angle holder pendant fittings

M/S PUNDIR BUILDERS

M/s RK ENTERPRISES

Aggrawal Builders and Furnishers

Sharda Enterprises

M/S S P BUILDERS

Amit Traders

M/s Vinod Singh Negi

ANEJA AND COMPANY