SPECIAL REPAIRS TO BLDG NO T-18/14, PROVN OF 01 X OPEN HEY STOCK SHED, BYCLE CUM SCOOTER STAND AT P-80 AND BOUNDARY WALL ADJACENT TO BI BAZAR UNDER AGE B/R- I AT GE (W) BAREILLY

Amount

Dismantling timber scantling 40sqcm and over in section, in any position framed sections (roof trusses) complete all as specified and directed.

M & L for second class hard wood clean sawn in scantling fixed to framed structures complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified.

M & L 6 mm thick Asbestos Cement sheet, corrugated, or semi corrugated sheets in roofs, walls etc. and fixed with J or L hook complete all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L brickwork with fly ash bricks, straight or curved on plan exc. 6m mean radius built in 1:6 cement mortar complete all specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exc 1.5sqm each including iron mongeries, hold fast etc and including making good disturbed portions of walls in CM(1:4) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5sqm but not exc 4sqm each including iron mongeries, hold fast etc and including making good disturbed portions of walls in CM(1:4) complete all as specified and directed.

Taking down shutters of any description not exceeding 1.0sqm each including iron mongries, hold fast etc and removing to or from store complete all as specified and directed.

Taking down shutters of any description exceeding 1.0sqm but not exceeding 2.0sqm each including iron mongries, hold fast etc and removing to or from store complete all as specified and directed.

M & L for demolition of cement concrete in any position and in any description complete all as specified and directed by Engineer-in-charge.

M & L for plain cement concrete 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection 75 mm thick finished even and fair complete all as specified and as directed.

M & L for 40mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished even and fair complete all as specified and as directed.

S & F second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 30 mm thick flush door shutter solid core construction with block board core and plywood face panels commercial type on both side including teak wood lipping 6mm thick fixed with nails complete all as specified and directed.

M & L for 35mm thick second class hardwood glazed and skeleton shutter open rebated & prepared to receive glass, gauge etc, without sash bar edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc, of 2nd class hard wood , members of shutters as specified in SSR Part - I Section 8 clause 8.24 (a) fitted to chowkats all as specified and directed.

S & F in repairs 25mm block board shutters, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as directed.

S & F 100mm hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as directed.

S & F 100mm long ISI marked mild steel butt hinges, medium weight, cold rolled complete all as specified and directed.

S & F 200mm long ISI marked mild steel barrel tower bolts, stove enamelled black with bright bolts and fixed complete all as specified and directed.

S & F 300mm long ISI marked mild steel sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S & F 125mm long ISI marked mild steel pressed handle, oval type, stove enamelled black complete all as specified and directed.

S & F 300 mm long ordinary rat tail pattern springs including roller and roller plate complete all as specified and directed.

S & F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours, articles n.exc 200 cu. cm each complete all as directed.

S & F in repair stainless steel curtain rods 32mm dia with bracket and ends etc complete all as specified and directed.

S & F solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube all as specified or as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width strucks inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either to side and as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as specified of drawing.

S & F 100mm long medium weight, cold rolled stainless steel butt hinges with steel screws complete all as specified and as directed by Engineer-in-charge.

S & F aluminium handle, cast type anodised size of handle 125mm ISI marked .

S & F aluminium anodised, barrel tower bolts of extruded section length of bolt 150 mm ISI marked.

S & F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bar dovetailed or welded all as specified or as directed.

S & F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete without glazing bar dovetailed or welded all as specified or as directed.

S & F steel ventilators with top hung shutters including hinges steel peg stay complete all as specified and directed.

S & F mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc with end of bars shouldered and or riveted, or forged into spikes and similar works conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exc. 0.50 sqm in each pane all as specified or as directed.

S & F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples all as specified or as directed.

S & F in repair 4mm thick E- Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised aluminium snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25 mm thick wax polished over and including 15mm thick cement screed in CM(1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing including demolition of existing tiles/kota stone complete all as specified and directed.

M & L for machine cut kota stone slab 20-25 mm thick as in riser of steps, skirting, dado and pillar over and including 10mm thick rendering in CM(1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing including demolition of existing tiles/kota stone complete all as specified and directed.

M & L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of CM(1:6) including dismantling of existing tiling and cement mortar bedding complete all as specified or as directed.

M & L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm as in skirting jointed in neat cement slurry and pointed in white or coloured cement over and including 10 mm thick rendering in CM(1:4) and including dismantling of existing tiling and cement mortar bedding complete all as specified or as directed.

M & L for colour printed glazed ceramic coloured tiles in vertical surface (300/350) x 450 x 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering or bedding layer of CM(1:4) and dismantling of existing tiling and bedding complete all as specified or as directed

M & L for rendering 15mm thick on brick work or concrete surfaces in CM(1:6) finishing the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for rendering 15mm thick on brick work or concrete surfaces in CM(1:4) finishing the surface even and smooth without using extra cement including taking down plaster from wall including raking out joints, hacking for keys and scrubbing down with water etc complete all as specified and directed

M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M & L for preparing old surfaces of walls (old decorated plastered or unplastered) and applying one coat of white wash complete all as specified and directed.

M & L for preparation of new surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for complete removal of existing treatment on walls and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for applying 3mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed.

M & L for preparation of new wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces of any description, over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S & F 500 ltrs capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old unsv water tank capacity exc 250 but n exc. 500 litre complete all as specified in SSR Part I.

S & F 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms complete all as specified or as directed.

S & F for 20mm dia gun metal globe or gate valves with iron wheel head, screwed both ends or iron pipe and fixed including all fittings complete all as specified or as directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good in PCC or CM(1:3) not exceeding 10 cm girth complete all as specified and directed.

S & F in repair of 15mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 15 mm dia steel tubing and connections complete all as specified or as directed.

S & F in repair of 20mm bore galvanised steel water tubing with all fittings 'medium grade' and fixed complete to wall and ceiling or laid in floors including taking up or down 20 mm dia steel tubing and connections complete all as specified or as directed.

S & F in repair of 15mm bore bib taps fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified or as directed..

S & F in repair of 15mm bore stop valve, fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed all as specified and directed.

S & F in repair PTMT grating size 125mm fixed with white cement complete all as specified or as directed.

S & F in repair vitreous china wash hand basin white/coloured flat back or angle back type of size 550mm x 400mm in repairs including cutting for and pinning ends of brackets including 32mm bore PTMT waste coupling (half or full threaded) and PVC waste pipe 32mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified or as directed.

S & F in repair 15mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed.

S & F in repair chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union size 125 mm complete all as specified or as directed.

S & F in repair for 15mm dia concealed stop cock fancy type, cast copper alloy chromium plated long shank and cup washers, crutch or butter fly handle, screwed down, screwed for iron pipe of 15mm bore all as specified or as directed..

S & F in repair for PVC low level flushing cistern 10Ltrs capacity with all internal accessories and fixed to wall including provision of 450mm PVC connection pipe 15mm bore with brass union and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC etc complete all as specified or as directed..

S & F in repair towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.

S & F in repairs soap dish, brass chromium plated fixed to walls complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints laid in floors or trenches including taking down eaves gutters and rainwater pipes (any size or pattern) complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) soil waste and vent pipes, rain water pipes, drainage pipes single socketed in any length with rubber ring joints laid in trenches or in floors including taking down eaves gutters and rainwater pipes (any size or pattern), including fittings, heads, shoes, bends, swan-necks etc and removal to store complete all as specified or as directed.

S & F in repair 75mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F in repair of PVC (SWR) 75mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Vitreous China Squatting pan of Orissa pattern, size 630x450 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern) including providing new flush pipe complet all as specified and directed.

Excavating in post holes in soft/Hard Surfaces (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to distance n.exc 50m and making good surface.

Surface dressing not exc. 15 cm deep in soft/loose soil.

M & L Anti termite Treatment using Chloroohyryphos 20 EC to floor external perimeter, junction of walls and joinery inextg building at the rate of 2.25 litre of emulsion complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point in soils

M&L for sand filling under floors or in foundations including watering and cosolidation complete all as specified.

M&L for Hard core of guage n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface or broken stone or boulders..

M&L 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in floors, 100 mm thick finishing even and smooth without using extra cement.

M&L for PCC type B-1 !:2:4 (20 mm graded aggregate) as in floors, 100 mm thick finishing surface even and smooth without using extra cement.

M&L for glass dividing strips 3 mm thick inserted in position conform to design.

M&L for PCC type C2, 1:3:6 ( using 40 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

S&F steel work in tubular roof trusses (framed) trussed, purlines including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St -240.

S&L for door framed work brackets of angles or tees with web and flanges cut to shape, drilled and counter sunk for screw including bending and welding angles as necessary gusset plates riveting etc 10 Kg each brackets confirming to Fe-290 Gde E-165.

S&F Expanded metal, cut to length, bent to shape required and tying with and cluding annealed mild steel wire not less than 0.9mm dia or fixing with alvanised steel staples supplied and fixed to complete to wood or steel members n.exc 4.0 Kg/Sqm Etc.

S & F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed .

S & F of Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed .

M&L for 15 mm thick cement plaster on brick surfaces or concrete surfaces in cm (1:6) finishes even and smooth finshes with out using extra cement.

Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified

M&L for Add to (or deduct from) last item for every 3 cm or part thereof above or below 15 cm average depth

M & L for PCC 1:3:6 Type C2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M&L for applying two coats of cement base paint over a coat of primer on new plastered surfaces of wall including preparation of surfaces

M&L for 75mm thick plain cement concrete type D2 1:4:8 (40mm graded stone aggragate) as in sub base complete making impression of expended metal whilst the concrete is green

M&L for PCC Kerb stone outer coloured surface machine pressed factory made of size 300mm long 100mm wide and 350mm deep in PCC 1:2:4 type B0 using 12.5mm grade stone aggregate jointed in CM 1:4 complete all as specified and directed

Excavation in trenches not exc. 1.50 m wide and not exceeding 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exceeding 10 sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in each layer as in soil complete all as specified and directed.

M & L cement concrete 1:4:8 type D2 using 40mm graded stone aggregate for foundation filling and mass concrete complete all as specified and directed.

M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for mild steel TMT bars 5mm dia and over up to and including 10mm dia in stirrups, spaces and binders cut to length, bent to shape required including cranking, bending spirally for hooping for columns and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M & L for form work to sides of concrete foundations, footings, bases of columns, raft and raft beam, sides and soffits (if any) of foundation and plinth beams and similar work vertical or batter for rough finished surfaces complete all as specified and directed.

M & L for form work to sides of pillars, posts, struts, piers, columns for rough finished surfaces of concrete complete all as specified and directed.

M & L for providing reinforced cement concrete M25 as in foundation, including rafts, footings, foundation beams, plinth beams, bases of columns etc complete all as specified and directed.

M & L for providing reinforced cement concrete M25 as in columns, piers, posts and struts etc complete all as specified and directed.

M & L for providing reinforced cement concrete M25 as in coping including form work complete all as specified and directed.

M & L for 10 mm thick rendering in cement mortar 1: 4 on fair faces of bricks wall or concrete surfaces finishing the surface even and fair to receive tiles/granite/kota stone complete all as specified and directed.

M & L for Granite stone slab (best quality) 13 to 15mm thick machine cut as on vertical surfaces of wall fixed and jointed with grey cement slurry and pointed with white cement with pigment to match the shade of granite stone including moulding, grinding and polishing complete all as specified and directed.

S & F of galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, straining bolts at ends, staples or steel pins etc. complete all as specified and directed (each line of wire to be measured).

S & F joist, channel, angle or tee sections Fe 410-W (Gde- E- 250) quality- A, fixed indepedently without connecting plates etc. (cut to ordinary length i.e. within 20mm of the length indicated) complete all as specified and directed.

Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified.

Taking down carefully UNSV main switch DBs and MCBs of any description of an size in any position complete all as specified.

Taking down submain wiring and cables including all accessories complete all as specified and directed.

Taking down light fittings of any type including all accessories complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (FRLS) multi strand PVC insulated and unsheathed copper conductor cable concealed in PVC conduit 20 mm dia and including complete with 1.60mm thick pressed steel concealed galvanised terminal boxes and with top cover 3.0 mm thick ISI marked plastic laminated hylum sheet of reqd colour fixed with brass screws and cup washers, complete with all accessories and all as specified including 1.5 Sqmm (FRLS) PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following.

(a) One light / fan/ exhaust fan point controlled by one switch.

(b) One 5 pin 5 Amp switch socket out let point on an independent board.

(c) One 5 pin 5 Amp socket out let point controlled by one switch on same board.

(d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent

All as per item 120 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded complete all as specified.

M&L for sub main wiring with two single core 4.0 Sqmm (FR) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 2.5 Sqmm (FR) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :- Two runs of 4.0 sqmm (FR) and one run of 2.5 sqmm (FR) copper conductor shall be measured as one unit length.)

S&F switch piano flush type 5 Amp single pole one way.

S&F socket out let 2 in 1 flush type 5 Amp 5 Pin complete.

S&F switch socket combination out let 6 Pin 2 in 1, 5/15 Amp flush type 240 Volt complete.

S&F bell push flush type 5 Amp

S&F bell ding dong musical ,AC, 230 Volt, single pole

Supply and Fixing ceiling rose PVC / Poly carbonate, Isolated body, three terminal AC 230 volts complete all as specified and directed.

Supply and fix in replacement of fan regulator 150 watts electronic flush socket type with five stepped range hum free complete all as specified and directed .

M & L for replacement of lamp holder, PVC / Poly carbonate, insulated body with back plate batten/angle type for batten fittings complete all as specified and & directed

S&F MCB SPN 63 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B40/63 N of Make C&S or equivalent in Legrand/ Scheneider.

S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge.CAT No. CSMBS1B6-32 of Make C&S or equivalent in Legrand/ Scheneider.

Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links Cat part No CSDBSPNSD04 ofof C&S or Equivalent Model in Legrand / Schenieder as Approved by GE complete including taking down old unsv all as specified and directed.

Supply and fixing surface mounting LED indoor decorative PVC extruded T-5 batten , 20 Watt, 4 feet including connection with 23/0.0076 three core PVC flexible cable etc complete all as specified and directed. Model : Cat No. LTTB4F20WLED P/W of Make-C&S, its equivalent model in Philips/CG/Bajaj

Taking down and refixing carefully serviceable ceiling/ exhaust fan including provision of new single core twin twisted cable from ceiling rose to ceiling fan connector all as specified and directed by Engineer in Charge.

M & L for GI tubing light grade 40 mm bore complete with all fittings like bends, sockets, elbows etc for passing through cables under the floor, along the wall or along the pole complete all as specified and directed.

M&L for dismantling the electronic/ electric meter from wooden board and refixing the same with proper concealed connections on the same and testing after completion for reading complete all as specified and directed.

S&F indoor decorative LED light fitting suitable for 3 to 5 watt LED lamp with brass made bracket with round base lacquered having brass holder and brass gallery with glass including lamp complete all as specified and directed.

S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge.

Supply and fix flush sheet metal enclosure SPN DB 4 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete all as specified and directed.

Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified

Supply & Fixing security light fitting, LED type, 20 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source with integrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with and including nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed.

Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2.0 core as required at site.

Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed.

Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.

Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.

Sand cushioning for cables all as specified and directed . Note:-Punned sand layers measured only.

Material and labour for old size brick well burnt, laid flat, for cable protection complete all as specified and directed.

Notes :

M/S Gupta and Company

Vasundhra Enterprises

M/S Rajeev Sharma and Co.

M/S ARORA ENTERPRISES

RAZA ENTERPRISES

M/s Agarwal Builders

M/S Gupta Builders

M/S Harshri Nath Enterprises