Construction of Block Developement Council at Tangmarg ,Block Tangmarg under CD AND PANCHAYAT

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth,1.5 m in width as well as 10 m Sq. on plan) including disposal of surplus excavated earth, as directed by Engineer-in-Charge (incl dewatering if required ). All kinds of soil :

Supplying and laying of quarry stone soling hand packed tightly incl ramming watering and filling of interstices

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) complete job

Supplying and filling RBM under rooms incl. compaction by ramming watering etc complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, columns roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations: footings, bases of columns etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access platform.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts, and struts.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructural above plinth level upto V floor including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): KD wood

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. KD wood (35mm Thick)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick .KD wood

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. First class KD wood shutters 35mm thick

Providing and fixing 3.5mm including cost and fixing wooden fillets/ beeding of required size and shape with nail incl all carriage complete

Providing and fixing 35mm wire guaze shutter using galvanized M.S wire gauze of average width for aperture 1.4m in both directions of wire dia 0.63mm for door,windows and clerestory windows with ISI marked M.S pressed butt hinges bright finish of required size mecessary screws as per directions of EIC Ist class imported wood

P/F of Hardware fittings of approved make cjob

handle 5" Al

handle 8" fancy type

T-Bolts (4")

T-Bolts (6")

door Al-drop with lock Link/ ramson 12"

door Al-drop with lock Link/ ramson 10" "

door stopper

Stay hook 5"

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such Kilogram as nuts, bolts, fasteners etc. including lifts, carriage of the material complete job

Providing and laying Antiskid vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 300mm x 300mm

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600 mm x 600 mmincl all carriage cjob

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (300mm x 450mm)incl all carriage cjob

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias, staircase risers and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade incl skriting wherever required cjob (18mm Thick)

Providing edge moulding to 18 mm marble stone counters, Vanities etc.including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer- in-Charge (Granite Work) Double moulding

12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) including all lifts,leads,carriage of the material.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. ( 2mm Thick)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Two or more Coats )

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position including welding etc and applying a priming coat of approved steel primer all complete.

Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer- in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including all lifts,leads and carriages complete job

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

Providing valleys of 90cm wide overall in plains G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G I. limpet and bitumen washers complete.1.60mm thick with zinc coating not less than 350gm/m2

Providing and fixing plained eaves boarding. 2nd class Kail Wood 300x40 mm (nominal size) complete job

Providing and fixing of soffits made out 12mm thick imported wood planks incl underneath frame work and scaffolding carriage complete (Badloo work )

Internal water supply & sanitary installation

Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings & fixtures,seat cover etc WC Pan With ISI marked White solid plastic seat and lid.

Providing and Fixing Wash basin with C.I brackets ,15mm dia CP Brass single hole basin mixer of approved quality and make ,including painting of fittings and brackets ,cutting and making good the walls wherever required.White viterous china wash basin size 500x400mm with a 15mm CP brass single hole basin mixer.

Providing and Fixing stainless steel A ISI 304(18/8) Kitchen Sink as per IS:13983 with CI Bracket and satinless steel plug 40mm including painting of fittings and brackets ,cutting and making good the walls wherever requiredStainless steel kitchen sink - without drain board 610x510 mm each 2582.00 bowl depth 200 mm

Provinding and fixing CP Brass 32mm size Bottle trap of approved quality and make and as per the directions of engineer incharge.

32mm dia

40mm dia

Providing sink mixer wall mounted with 170mm long swivel spout connecting leggs and wall flanges)CERACat no ocean F3002501 or approved equilent

providing and Fixing Graded hoses with two 15mm CP Brass nuts and rubber washer wiyhout nipple 45cm long 15mm nominial bore

Providing and fixing toilet paper holder of CP Brass made.

Providing and fixing testing and commisioning of CP Brass twin coat hook with concealled screws.

Providing and fixing Health Faucet 15mm dia with CP Flush pipe,CP Nozzle hook complete job incl CP Flanges etc

Providing and fixing testing and commisioning of CP Brass Towel ring hook with concealled screws.

C.P. Brass angle valve 15 mm nominial bore

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing fixing horizontal/vertical hot water gyser of MS Body with copper jacket inside with neccesarry inlet ,outlet ,drain,overflow,vent and all safety accessories 15litre for kitchen

Mirror of superior make glass 60x45 cm

C.P. Brass/SS long nose bibcock of approved quality conforming to IS Standards and weighing not less than 810g 15 mmnominial bore

Providing and fixing UV Stabilsed UPVC Pipes Type-B as per IS 13592 ,100mm Dia

Providing and fixing properiartry polysheild outer mechanical protection on rubber insulation comprising of wrapping with polyglass tape(Location inside the shaft and open to skypipe only)100mm dia

Providing and fixing MS Holder,bat clamps of approved design embedded in 10x10x10cm cement concrete blocks 100mm dia pipes

Providing and fixing multi inlet UPVC Floor trap with minimum 50mm water seal with 110mm outlet and providing strainer of 150x150mm square stainless steel 2mm thick farme 100mm inlet and oulet

Providing and fixing UPVC Pipe as per IS 4985 6Kg/Sqcm class III complete with all fittings and clamps

32mm nominial bore

40mm nominial bore

50mm nominial bore

Providing and fixing SS Gratings with frame including fixing to floor with cement mortar 125x125mm

Providing and fixing Floor drain points fromed out of 100x50mm dia reducer elbow embedded in floor all complete

Providing and fixing of GI Pipes complete with GI Fittings and clamps incl making good the walls etc concealed work incl cutting ,chaise and making good the wall

15mm nominial bore

20mm nominial bore

Providing and fixing polyethelene for raised temperature partII pipe heavy thermal stability fro hot and cold water supply minus 40-95 degree centigrate including all

20mm nominial bore

25mm nominial bore

32mm nominial bore

Providing and fixing ball valve of brass made of approved quality with plastic floats complte

20mm nominial bore

25mm nominial bore

32mm nominial bore

Providing and fixing properiartry polysheild outer mechanical protection on rubber insulation comprising of wrapping with polyglass tape(Location inside the shaft and exposed on wall/terrace only)

25mm dia (19mm thick insulation)

32mm dia (19mm thick insulation)

Providing and fixing enclosed tape water metre bulk type confirming to IS 2373 80mm dia nominial bore

Disinfecting CI Watermeans by flushing with water containing bleraching powder @0.5g/Litre of water and cleaning the same with fresh water 80mm dai CI Pipe

Providing and fixing C.I dirt box strainer for bulk type water metre with nuts bolts ,rubber insertions etc complete conforming IS:2373 80 mm dia

Providing and fixing of approved make float operated ball valve with brass or copper heavy duty float confirming to IS9762 for 80mm dia pipes

Carraige of Sand from Shilvat by M.T 40 km lead

Carraige of Aggregate from Kunzer by M.T 10 km lead

Carraige of Cement by M.T 9 km lead

Carraige of Stone soling by M.T 28 km lead

Carraige of RBM by M.T 10 km lead

Carraige of Steel/Reinforcement by M.T 10 km lead

Carraige of Bricks by M.T 46 km lead

Demolishing of existing gutted building

Add Provision for signboard & photograph (Pre-Execution, during-Execution and Post-Execution) & Unfroreseen item.

M/S ALI MOHAMMAD GANAIE

M/s Mohammad Ramzan Sheikh

MOHD IRFAN TANTRAY

ABDUL HAMID BHAT

FIRDOUS AHMAD GANAI

M/S SHAMIM AHMAD MALIK

HABIB CONSTRUTION

Farooq Ahmad Magray

hassan