Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.9 LAccepted-AOC DHARMANAGAR TRIPURA WEST | 1 | Accepted-AOC Accepted | |
| 2 | 2₹7.1 L+₹19,760.42 (2.88%)Rejected-Finance JATANBARI KARBOK GOMATI TRIPURA | 2 | Rejected-Finance higher rate |
Tender Value
₹7.5 L
EMD Value
₹15,041
Closing Date
29 Apr 2025, 12:00 pmClosed
DGM, ED Kamalpur
O/o DGM, ED Kamalpur, TSECL, Dhalai Tripura
Extension of HT/LT line including inst of 2x63 KVA SS for providing new 3 Ph SC to DTW scheme (WR) on the land of Sri Pintu Das at Dabbari of Dabbari G/P and Sri Gobinda Namasudra at Purba Mechuria of Dabbari G/P under ESD Salema of ED- Kamalpur
2025_POWER_60487_1
DGM/KMP/25-26/01 Dated 17.04.2025
Open Tender
Electrical Works
Turn-key
45 days
ED Kamalpur
As per Bid documents
3 documents required · 3 mandatory
₹1,000
₹15,041
ED Kamalpur
9 Jul 2025
17 Apr 2025
29 Apr 2025
18 Apr 2025
29 Apr 2025
22 Apr 2025
18 Apr 2025 - 22 Apr 2025
22 Apr 2025
Amount
A) Supply of the following materials :-
9 mtr long PCC Pole
8 Mtr. Long PCC Pole
Stay set complete (HT)
Stay wire, GI (stranded)
Stay insulator(11KV)
11KV, Pin insulator (Polymer)
11 KV Disc Insulator (Polymer)
11 KV Disc fittings
MS Channel (100*50*50*6) (Galvanised)
MS Channel (75*40*40*6) (Galvanised)
MS Angle (65*65*6) (Galvanised)
MS Angle (50*50*6) (Galvanised)
Machine made MS nuts & bolts (a/S) ic washer
MS flate 50*6mm size fabricated A/S foir stay set & line bkt.
LT Shackle insulator (3X3 1/2)"
LT Straps and bolts
11 KV G.O Switch ( 3 Phase ) (Polymer)
11 KV D.O Switch ( 3 Phase) (Polymer)
LA (11 KV) (9 KV , 5 KA)
ACSR(6/1/2.59SQMM)
GI WIRE 8 SWG
Reel insulator (16-25sq mm)
PVC cable 70 mm².
Cut-out 200 Amps (for S/S)
Cut-out 100 Amps (for S/C)
Lugs 95 sqmm
supply of 60 kg salt & 55 kg charcoal (for 1 pit)
supply of 2.5 mtr long 40 mm dia G.I. pipe (make TATA/ JINDAL)
WOODEN PLANK
Pole & DT numbering
B ) Erection of the New Supply Materials:-
09 Mt. long PCC Pole
08 Mt. long PCC Pole
Stay Set Complete
2.8 mt.long 100X50X50X6 mm ms channel Sub-Station Top bracket (line channel)
2.8 mt.long 100X50X50X6 mm ms channel Sub-Station bracket (for Txr base)
0.8 mt.long 100X50X50X6 mm ms channel Sub-Station bracket (for Txr cross bracket)
2.8 mt.long 75X40X40X6 mm ms channel for line Gang & Sub-Station (for GOS base & DOF unit base)
Erection of M.S Channel Cross - Arm, 0.3 to 1.2 mtr Long 75X40X40X6 mm (Single Pole Top and Bottom )
2.8 mt.long 65X65X6 mm ms angle for GOS Handle bracket
Erection of M.S Anglr Cross - Arm, 01 to 2.5 mtr Long 65X65X6 mm (Guard Bracket for SP and DP )
MS angle X-arm bracket of 4 wire 1.1 mtr. Long
Shakle insulator with Nuts & Bolts
11 KV polymer pin insulator.
11 KV single Disc polymer insulator set with fittings
ACSR 6/1/2.59 mm weasel (for 11 kv & LT line)
8 SWG GI wire
11 KV GOS Set of 3 (three) phase
11 KV DOF unit set of 3 (three) phase.
Erection & commissioning of 11/0.430 KV,63 KVA three phase distribution transformer including all accessories and connections
Sub-station Earthing by GI pipe 2.5 mtr. Long 40 mm dia i/c earth excavation and refilling with alternate layer of salt and charcoal, GI pipe,clamps, nuts & bolts.
Laying of 8 SWG GI wire at 300 mm below the ground level for earthing of sub-station equipments from the earth electrode
Erection of Wooden Plank made with Segun/Karai tree with all accesseries for fittings
Fabrication of MS Channel and angle including holes and other works
Providing three phase service connection with laying PVC cable from nearby Electrical pole to premises upto 35 mtr in length supported by GI wire, Reel Insulator in/c fitting-fixing of Energy Meter etc as required.
Supply and erection of sub-station fencing with erection of 10 nos. 2.5 mt long (65X65X6 mm) MS Angle post with grouting of Vol 0.045 cum at the ratio of 1:2:4 (1 cement: 2 river sand: 4 jhama bri ck aggregate) per post.The fencing should be made 9(nine) horizontal of barbed wire and one gate with shutter (2X1.7)m i/c locking arrangement etc.complete as per direction of the Engineer-in-charge.
C ) Supply and Carriage of the following materials :-
MS clamp made by 50X6 mm MS flate for bracket i/c Nuts & bolts (Assorted Size).
MS clamp made by 50X6 mm MS flate for stay set & strain screw i/c Nuts & bolts (Assorted Size).
Carriage of all Line Materials except Poles from Store yard to work site
Supply of 10 sq.mm. PVC wire for service connection
Supply of WACO make 5 KVA Megger
Supply of Digital Clamp Meter
Carriage of DTR from MMD Division Agartala to to Work Site
Carriage of 9 mtr length of P.C.C poles by Machnical Transport Beyond 25 KM upto the lead of 50 KM
Carriage of 8 mtr length of P.C.C poles by Machnical Transport Beyond 25 KM upto the lead of 50 KM
Maintaining adequate clearance from overhead live conductors by trimming of tree branches for way leaves
RATAN PAUL (BID ID -173551)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .