ADDN/ALTN TO BLDG NO 6WS AND GENERATOR SHED AT SATGE-II PUMP HOUSE INCLUDING CERTAIN SANCTIONED REVENUE AND MINOR WORKS AT MIL STN NAHAN UNDER GE CHANDIGARH

Amount

Demolition of brickwork or stone/boulder masonary, built in cement mortar including quoins arches, pillers etc, but excluding ashlar facings, dressed stone work and precast concrete article built in cement mortar or cement lime mortar complete all as specified and directed.

Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for incl cutting of reinforcement as required to facilitate demolition complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering complete all as specified and as directed

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified.

Demolitioin of cement conc in ground floors and pavings n.exc 15cms thickness (below or above GL).

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing tiles and rubish off the premises

Dismantling structural steel work including doors, gates framed truss etc

Dismantling wrought iron or mild steel work of any description not therwise provided for, complete all as specified.

Hardcore broken stone of gauge not exceeding 63mm deposited, spread & leveled in layers not exc 15cm thick watered, rolled and rammed to a true surface complete all as specified.

M&L plain cement concrete (1:3:6), type C-2 using 40mm graded stone aggregate as in Plinth protection,75mm thick finished even and fair complete including necessary form work all as specified .

Forming contraction (dummy) joints 25 mm deep x 10mm wide, filled with sealing compound Grade A complete all as specified and as directed.

M&L plain cement concrete (1:4:8), type D-2, using 40 mm graded stone aggregate as in foundations, filling , mass concrete and sub base.

Earth filling under floors incl spreading, leveling, watering and well ramming in layers not exceeding 15 cm thick complete all specified and as directed.

Excavating in trenches( hard/dense soil) not exceeding 1.5 Metre wide and not exceeding 1.5 Metre in depth for laying of foundation, sewage/water lines etc not exceeding 10 Sqmtr on plan and getting out in any type of soil complete all as specified and directed.

Removal of excavated soil to a distance exc 250 metre and n.exc 500m depositing where directed at a level not exc 1.5 metre above the starting point complete all as specified.

Returning and filling in including spreading leveling watering and well ramming in layers not exceeding 25 cm thick using soft/disintegrated rock all specified and as directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, the like, any thickness, complete all as specified and as directed.

M&L RCC M-25 Design mix, using 20mm graded stone aggregate for concrete as in slabs, floors, roofs, landings, balconies, canopies and shelves etc., complete all as specified and directed.

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in beams, cantilevers, bressummers, lintels beyond 1.5m span etc., complete all as specified and directed.

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in columns, pillars, piers, posts and struts etc., complete all as specified and directed.

M&L RCC M-25 Design mix, using 20mm graded trap stone aggregate for concrete as in chhajjas, complete all as specified and directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, including attached pilaster and buttresses etc., complete all as specified and as directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slab, landings and similar work not exceeding 200mm thick, horizontal or sloping finished rough complete all as specified and directed.

Formwork for sides & soffits of floor or roof beams including bressummers, lintels, cantilevers, shelves including soffits etc complete finished rough complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions of square or rectangular finished rough complete.

Formwork to chullah hoods, chajjas, troughs and similar items including edges for rough finished surfaces complete all as specified and directed.

M&L Modular Brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

Material & labour for chequered cement concrete coloured tiles 20cm x 20cm x 25mm thick, with grey cement and pigment, jointed and pointed in neat cement slurry in floor laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material & labour for 60mm thick non skid pre polished coloured interlocking paver block made with electro vibro technology with rubber/ PVC moulded of not less than compresive strength 30 Kg/Cm and shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment complete all as specified and directed by Engineer in Charge.

Material & labour for providing cement concrete Type B1 1:2:4 (20mm graded crushed stone aggregate) kerbs or mut stops, rounded or chamfered on edges etc complete including necessary form work complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L 75 mm thick Cement concrete type D2,1:4:8 (40mm graded stone aggregate) as in sub base,path,floor, hardstanding complete as as specified and directed.

M&L for rendering 10mm thick in CM (1:3) on concrete surfaces of ceiling, soffits of slabs, shelves, isolated RCC members etc., finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on fair faces of brick/block masonry wall surfaces finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15mm thick plaster in CM (1:4) on concrete surfaces incl roofs finished even and smooth without using extra cement and with liquid WPC as per manufacturer's instructions complete all as specified and directed.

Supply only liquid integral water proofing compound all as specified and as directed.

M&L for applying 1mm thick wall care putty on wall surfaces including rubbing down with sand paper to have even and smooth surface complete all as specified and as directed.

All as per item No 42 above but on ceiling surfaces

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bond distemper over a coat of primer complete all as specified.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bond distemper over a coat of primer complete all as specified.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including 2mm thick putty and a priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces in camouflaging pattern or in any other pattern as approved by the user Complete all as specified and as directed.

TMT bars 10mm dia and over cut to length , bent to shape required including , cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete.

TMT bars 5mm dia and over upto and incl 10mm cut to length, bent to shape required including, cranking hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers, binders etc complete.

S&F factory made box type steel windows steel frames 80mmx60mm(peripheral) and 80mm x75mm(internal members)made out of cold rolled 1.25mm thick sheet having steel window/ventilator shutter of MS tabular section of size 50mmx20mmx1.1mm thick fixed with box type hollow tabular section beading of glazed and wire shutter handle of 100mm size made out of Z-section 02 Nos M stove enameled black tower bolt of size 120mmx 2 Nos, 150mm mild steel hooks and eyes including a shop coat of primer fixed in repairs complete all as specified and directed by Engr-in-Charge.

All as per item No 49 above but without glazing bar

S&F for Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specified and directed by Engr-in-Charge.

S & F 4mm sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 sqm in each pane complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and and average width of aperture not more than 1.40mm fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.

S & F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. including making good to existing surface jamb/floor complete in all respect including demolished flooring /tiles making jambs, giving existing type of surface finish etc so as to mach the existing surface, complete all as specified and directed by Engr-in-Charge.

M & L 35mm plain framed panelled shutter (Min 2 panels) with 2nd class hard wood rails & styles and panel of 9mm BWP commercial ply on both faces. The size of rail and stile as per IS 1003(part I) klin seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.

M&L for preparing new wooden surface of any description over 10cm width or girth and painting with two coats of synthatic enamel paint over a coat of pink primer complete all as specified

S&F stainless steel Butt hinge 100mm size.

S&F 150mm size, Stainless Steel, D type with back plate, handle and fixed with screws complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long.

S&F 250mm Mild steel sliding door bolts,plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

S & F 150MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches/walls or in floors with fittings, complete all as specified and as directed

Demolition of Mud phuska, tiles in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) throw outside as per Direction of Engr-In-Charge.

M&L for preparation and cleaning surfaces of cement concrete incl flashing and junction of parapets etc and applying APP based polymeric memberane min wt 3 Kg/Sqm and min 3 mm thick reinforced with non woven fabric with torch application over and including a coat of oil base bituminous primer and finally applying two coats of bitumenous aluminum paint @ 0.25 kg per sqm over APP membrane, complete all specified and directed.

Damp proof course, 25 mm thick in cement concrete (1.2.4) type B-0 using 12.5mm graded stone aggregate using WPC to horizontal & vertical surfaces including necessary form work complete all as specified. ( WPC shall be measured and paid separately).

Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum per sqm complete all specified and directed.

Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sq. m complete all as specified and directed.

S&F straight edge (joint free) non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm, in floors etc.in any colour or pattern, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all specified and directed.

S&F straight edge (joint free) glazed ceramic tiles 450 x 300 x 7mm thick coloured on vertical surfaces such as dado skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete all specified and directed.

M&L Cement concrete in surface channels and drains in cement concrete 1:3:6 type C2 (40 mm graded stone aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

S & F 0.63mm galvanised, corrugated mild steel sheeting with two corrugations side lap fixed with coach screws and washers in roofs, walls etc with grade of zinc coating 275,complete all as specified and as directed.

S&F 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275,complete all as specified and as directed.

S&F 2mm thick Fibre glass reinforced translucent corrugated sheeting of any colour with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S&F Framed work Fe-410- W(Gde E-250) quality B as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

S&F Steel work in tubular trusses Fe 410 -W (Gde E- 250) qual including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and as directed.

S&F Fe-410-W(Gde E-250)quality B rolled mild steel in roof trusses(Framed)trusses, purlin, crane gantries, rails and framing(beam, tee, angle, channel or flat section)including distance pieces , cleats etc, complete all as specified and as directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; fascia gutter , framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and as directed.

S&F MS Fe-410- W(Gde- E-250) quality-B Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in covering the duct

S&F 4mm dia galvanised steel wire,150x100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling omplete all as specified and as directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and as directed.

M&L preparation of new steel and iron surfaces of any description, not otherwise described two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and as directed.

Supply and Fixing chain link fencing 50mmX50mm mesh or cages with 4mm dia including line wires, rails, straining bolts, etc. including provission of binding wire, complete all as specified and as directed.

M&L for Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and directed.

M&L for removing surplus excavated material exc 1.50m but not exc 5.00km and depositing where directed.

M & L for providing RCC 1:2:4 type B1 ( using 20 mm graded stone aggregate) as in manhole cover slabs etc set in CM 1:6 including necessary form work complete all as specified. Note : The quoted rates shalll deemed to include for providing two handles of MS round bars 12 mm, make to shape and of length 65 cm long in each cover complete.

M&L for Rendering 15 mm thick in CM (1:6) on fair faces of brick/block masonry wall surfaces finished even and fair without using extra cement complete all as specified.

S & F 4mm Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane complete all as specified and directed.

Providing and fixing Powder coated aluminium work for door windows, ventilators, casement/sliding shutters and partitions with extruded built up standard tabular and other sections of approval make fixed with rawl plugs and screws or with fixing clips or with expansion hold fastner incl neceesary filling up of gaps at junctions at top bottom & sides with required PVC neoprene belt etc. Aluminium section shall be smooth rust free straight mitred and jointed mechanically where ever required including cleats angles, aluminium snap beading for glazing/panelling, CP brass/stainless steel screw incl providing hinges/pivot and making provision for fixing of fittings where ever required. (Note:- The rate is inclusive of rollers, Maruti locks/star locks, robber beading, rubber seal etc for sliding/casement shutters required for satisfactory operations of window/ventilators/doors or as directed by Engineer-in-Charge. 2. panel fillings other than aluminium filling and necessary fittings shall be measured and paid for seoparately under respective items.)

S&F 6mm thick bakelite sheet printed/wood grain finish/decorative choice fixed in aluminium panels complete all as specified and as directed by Engr-in-Charge

Cutting chases in stone wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth

Supplying and laying CPVC pipes (SDR-11) of outer dia 20mm with and including plain CPVC SDR-11 fittings on walls and ceilings or laying in floors complete all as specified and as directed.

All as per item No 92 here-in-before but 25 mm dia complete all as specified and directed.

S&F 25 mm (outer dia) cpvc ball valve, complete all as specified and directed.

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks 2 layres ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F 15mm dia Ball brass valves high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S & F 110MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S & F 75 MM PVC SWR Pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

S&F 110MM PVC SWR Bends any radius complete all as specified and directed.

S&F 75 MM PVC SWR Bends any radius complete all as specified and directed.

S&F 75MM PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedastal pattern) white , including 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F vitreous China wash basin, (white) Flat back, size 550x400 mm including cast iron brackets, PTMT waste coupling and PVC waste pipe complete all as specified and directed.

S&F Pillar taps mixture type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for 15 mm bore iron pipe and fixed complete all as specified and as directed.

S&F 15mm dia bib taps CP brass,fancy type,long body, screwed down, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F 15mm dia Angle cock chromium plated brass fancy type, screwed down , high pressure, scrwed both ends for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F Chromium plated brass 2 in 1 health faucet with hook 1mtr tube complete all as specified and directed by Engr-in-Charge.

S&F Chromium plated brass Toilet paper holder complete all as specified and directed by Engr-in-Charge

S &F Vitreous China urinals, bowl type (back or corner wall type), complete ncluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. Exclusive of fixing supply pipe to flushingcistern, trap and waste pipe)

S &F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engr-in-Charge .

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr-in-Charge

Cutting into existing manholes for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in PCC (1:2:4) type B-1 smooth finished for 100 mm internal dia of pipe,

M&L for rough excavation(Hard/dense soil) not exceeding 1.5 m deep and getting out, complete all as specified.

M&L for plain cement concrete (1:2:4), type B-1, using 20mm graded crushed stone aggregate as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete, all as specified and directed.

M&L for Hard core of gauge exc. 63mm but not exc 100mm,deposited,spread and levelled in layers not exc. 15 cm thick, watered and rammed/rolled to a true surface complete all as specified.

Supply, installing, testing and commisioning Wall mounted cooling with heating arrangement and Digital Inverter twin rotary type hi wall 2 TR split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality non star rating , electric driven single phase ,AC 230 Volts,50 HZ including fixing acessories wall mounted with indoor unit,out door unit (condencing) to be installed on frame of suitable size of bracket duly painted complete in all respect including copper wound compressor ,copper refrigerent pipe suction & discharge line of standard size as required duly insulated condensate water outlet pipe and 3 core copper wire of required length between stabilizer & indoor/out door units and making good to match the existing surface complete all as specified and directed by Engr-in-Charge

Supply and fixing of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA including high/low voltage cut out and time delay including mounting arrangements complete all as directed.

Supply and fix exhaust Fan 300mm sweep (5 Star BEE rating), 1200 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal including making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed.

Taking down copper point wiring (light, fan, socket or power) complete, including ,fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down Distribution board/Meter box of any size and making good disturbed surfaces all as specified and directed.

Taking down old unserviceable light fittings any type and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

M&L for point wiring using approved colour coding as per IS ( for Phase and neutral) with copper conductor 1.5 sqmm ( Cross sectional area) single core multistranded FRLS ,PVC insulated and unsheathed cable 1100 volts grade,conforming to IS drawn and including PVC concealed coduit with fittings ISI marked ,terminated in modular switch boxes incl 1.5 sqmm (cross sectional area ) single core ,multistranded ,FRLS PVC insulated and sheathed cable as earth continuity conductor connected to earth dolly for one light point control by one way switch complete all as specified and directed. Note: 1.Modular switch sockets fan regulators shall be measured and paid separately under respective items.

- Ditto - all as per item No - 124 above but for one ceiling fan/Exhaust fan point.

- Ditto - all as per item No - 124 above but for one 3 pin 5 Amp socket on same board all as directed.

- Ditto - all as per item No - 124 above but for one 3 pin 5 Amp socket on indipendant board all as directed.

- Ditto - as per item No -124 here in before but with 4 sqmm copper conductor for 15 amp socket with 2.5 sqmm earth continuity conductor.

S&F of Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S&F of Modular socket 5 pin ,5/6 Amps suitable for 2 Module complete all as specified and directed.

S&F of Modular snap switch SP, one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S&F of Modular socket 5/6 pin, 15/16 Amps suitable for 2 Module complete all as specified and directed.

S&F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.

S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.

S & F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 12/8 module complete all as specified and directed.

All as per Item No-135 above but 6/4 module complete all as specified and directed.

All as per Item No-135 above but 3 module complete all as specified and directed.

All as per Item No-135 above but 2 module complete all as specified and directed.

S&F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.

Supply and fixing of lamp holder insulated body with back plate suitable for any type of fitting incl one No of LED Bulb 15-18 Watts Base B-22 retrofit type all as specified and directed.

Supply and fixing of Indoor Decorative LED box type suitable for fixing ceiling/wall with aluminium base directly retro fit LED tube Light , 22 watt, , Color: Cool day light 4 ft white Operating Voltage: 140-270 volts complete with all accessories internally pre wired and including up with three core PVC copper flexible cable of size 23/0.0076 from ceiling rose to connector block complete all as specified and directed .

Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 12 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.

S&F of isolator DP 40-63 amp 230 Volt complete all as specified and directed.

S&F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.

Taking down and re fixing the existing water geyser/ Ceiling fan/exhaust fan any type and any size after necessary servicing/greasing complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement of Energy saving LED security light fitting 70 Watt 230 V, AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete complete all as per manufacturers specifications including taking down old unsv fittings of any size / watt complete all as specified and directed.

Supply and fix in replacement of security light fitting bracket made up of 32mm dia medium grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed

Supply and fixing of Exhaust fan 380 mm sweep heavy duty complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230/240 Volts, single phase, 50 Hz,1400 RPM , AC supply with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm and making all necessary connection and fixed by using 4 Nos 100 mm long 10 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 (including cutting of wall etc) completed all as directed. Note: The UNSV old one Item Srl No 149 is MES property and will be handed over to MES Store Yard .

S&F of LED high bay light fitting out door type 80 watts pressure die cast aluminium housing,electronic driver unit and LED lamp with refector and IP 66 protection incl necessary mounting bolts, connecting up incl taking down old unsv fittings all as directed .

Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth and forming bottom surfaces to the required gradient and slope for laying of cable, pole etc and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

Returning, filling, in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, all as specified.

Removing excavated surplus (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

Supply and laying dry river sand to be laid in 8 cms before laying of cable and 15 cms above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured

Supply and laying double wall corrugated pipe (DWC) conforming to IS 14930 part-2 of size 120 mm outer dia and 103.5 mm inner dia all as directed.

Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 16 Sqm 2 core size including taking out unserviceable complete all as specified and directed. Note:- (i) Excavation, earth work, cable protection and sand cushioning shall be measured and paid seperately .

Ditto- all as per item No: 158 but size 95 sq mm 3.5 core

Ditto- all as per item No: 158 but size 185 sq mm 3.5 core incl suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire wherever required at site all as directed by Engr-in-Charge.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

Supply & install in repairs steel tubular pole swaged welded with MS base plate size 30cm x 30cm x 6mm thick final taper plug bolts nuts & washers as per IS: 2713 (part-I) 1980 made out of MS tubing including painting of two coats of aluminium paint of approved quality over one coat of red oxide primer length 10.00 mtr long 410 SP -44 using for any description of external electric work all as specified and directed by Engr-in-charge.

M & L Diameter of stay rod in 20mm with Stay assembly complete with accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately

Meterial and labour for cement concrete in foundations for pole coping or any other work type B0 1:2:4 with 12.5mm graded crushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm graded crushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.

M&L for GLOW SIGN BOARD SIZE 4.50 m x 0.60m x 0.20m incl angle iron size 50 x 50 x 6mm length 01 ft –02 Nos grouted in Main entrance Piller with cement plastering for fixing the glow sign board. Rest of the sides of the structure except front side will be covered with galvanized plain sheet 0.80mm thickness with zinc coating both sides fitted with nut, bolt washer 25mm length 6mm dia-04 Set Bottom support incl angle iron size 50mm x 50mm x 6mm length 08 ft –02 Nos grouted in suitable PCC 1:4:8 type D2 40mm graded platform with cement plastering for fixing the glow sign board all as directed by Engr-in-Charge. Note:- All galvanized plain sheet and equal angle iron painted with 2 coat of synthetic enamel paint over a one coat of red oxide paint as per approved colour included in this quoted rate all as directed by Engr-in-Charge.

All as per item no. 167 above but size 1.50m x 0.45m x 0.20m.

Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 06 sqmm 2 core complete all as directed.

S & F Rigid non-metallic PVC conduit exclusive 2 mm thick 20 mm dia of boxes junction/terminal) but inclusive of all tees, bends, elbows, educers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. etc complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete connector block complete all as specified and directed.

Supply & Fixing of decorated light fitting 7 - 10 watt suitable for fixing in stairs/toilet/bathrooms etc. for provided with a high output PMMA diffuser for glare free light incl connector block etc. complete all as specified and as directed.

Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 10 Sqm 2 core size complete all as specified and directed. Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .

Supply and laying double wall corrugated pipe (DWC) conforming to IS 14930 part-2 of size 63 mm outer dia and 50 mm inner dia all as directed.

M/S SHANTI SARUP DINESH CHAND