Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAccepted-AOC THENI | TAMIL NADU | 625203 | L1 | Accepted-AOC L1 - LOWEST TENDER | |
| 2 | Rejected-Technical | - | Rejected-Technical L3 | |
| 3 | Rejected-Technical THRISSUR KERALA | THRISSUR | KERALA | 679105 | - | Rejected-Technical L2 |
Tender Value
₹1.9 L
EMD Value
₹4,767
Closing Date
3 Oct 2025, 2:00 pmClosed
EXECUTIVE ENGINEER LSGD DIVISION THRISSUR
EXECUTIVE ENGINEER LSGD DIVISION THRISSUR DISTRICT PANCHAYATH THRISSUR
55740 Annual Plan-Thrissur District Panchayath 2025-26 - Completion of Moolankodu Drinking water supply project Pananchery GP-Ollukkara BP- Peechi Division-S1287/26-General Electrical Work-electrification
2025_LSGD_801921_24
TN 10/25-26
Open Tender
Electrical Works
Item Rate
90 days
AYYANTHOLE
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,767
Yes
27 Nov 2025
26 Sept 2025
4 Oct 2025
26 Sept 2025
3 Oct 2025
26 Sept 2025
Amount
Electrical work
OD38626/2025-2026:Supply of 3 phase 415/430 V, 3 HP, 2.2 KW, open well submersible pump set with 50 mm pipe size, head range of 23 to 57 mtr, discharge rate of 24000 to 6000 LPH (Makes preferred :- Deccan-3DE/3 SPL IMPELLER 3stage or equivalent Texmo,kirlosker make)
OD38628/2025-2026: Supply and providing three phase submersible pump controller with ammeter, voltmeter, push button, contactors, Over load relay, single phase preventer, additional dry run protector (iAD)and remote control unit with LTLK connect mobile App(Mpower pro) wire harness sets for iAD, control side and module side connections etc suitable for 3 HP submersible pump, including connections, setting and testing as required (L&T make MU-G6 DOL or equivalent make)
OD38625/2025-2026:Installation, testing and commissioning of 3hp Openwell vertical submersible pumpset after lowering down using tripod chain block with required accessories, fixing using supplied CI adaptor attaching new nylon rope.
OD56219/2025-2026:providing laying testing &commissioning of 'B' class heavy duty G I pipe confirming to IS 1239 Including weldimg ,fitting like elbows ,tees,flanges,tappers,nuts,bolts,gaskets,etc and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 50 mm/nearset size
OD38621/2025-2026:Supply and providing good quality marine Nylon rope 14 mm (white/green) for tying the pump set with required object outside the sump/well as required.
OD38614/2025-2026:Supply and providing 50mm dia GM/ brass or nearest size wheel valve or gate valve in leak proof condition as required.
OD38617/2025-2026:Supply and providing of 50 mm dia Non- return valve GM/ brass or nearest size at delivery line in leak proof condition.
90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board
90.14.24.17:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.2 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors.
90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm
90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm
OD38629/2025-2026:Supply and providing 4 pole enclosure for independent mounting of mcb/rccb/isolator etc required
2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli Amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps
90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm
1.17.24:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 4 sq. mm
1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm
1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm
5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
6.12:Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)
90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)
90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)
90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)
OD38622/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x3mm brass nut and bolt .
OD38613/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt .
OD38623/2025-2026:Supply threading laying and joining of the 20 mm dia B class GI pipe with all required accessories in ground in the existing trench as protective covering to earth leads.
OD38615/2025-2026:Supply and installation of 415V, 63A TPN AC 23A switch disconnector unit including HRC fuses in sheet steel enclosure complete with handle, door interlock and pad locking using necessary bolts and nuts, fixing the unit to wall, making good the damages, colour washing etc. including giving necessary connections as required.
OD38612/2025-2026:Supply and providing 2.00 mm thick 3.3 KV synthetic elastromeric fire retardant insulating sheet.
OD38620/2025-2026:Supply and providing GS-MB 3750 (inside 350X481X210 mm) meter box for fixing KSEB meter with hinged door and vision panel etc, fixed on wall and giving connections as required. (Sintex or equivalent make)
OD38619/2025-2026:Supply and providing M8 eye bolt hook in wall / parapet for binding support for KSEB service main.
OD38616/2025-2026:Supply and fixing 63 A HRC fuse base with HRC fuse link in the existing meter board and giving connections etc.
OD38624/2025-2026:Supply and fixing the following accessories in the existing meter board and giving connections etc.(63 A, 415 V 2 way neutral Link mounted on DMC/SMC base)
OD38630/2025-2026:Supply and providing ismc 100*50 mm heavy c channel
OD38627/2025-2026:supply and providing red yellow blue colour led indicator lamp ,AC/DC,25.5mm cutout dia as required
14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels
90.12.10.2:Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size
OD313192/2025-2026:supply and installation of ABC powder type (stored pressure)fire extingisher 4kg. capacity ISI Mark IS: 15683 consisting of ms cylindrical body squeeze lever,discharge valve fitted with pressure indicating gauge,30cm long high pressure discharge hose nozzle etc with map MAP Poweder for A;B;&C class fire ,fixing on wall with wall hook etc as required
OD38618/2025-2026:Charges for preparing application/completion forms with sketch/scheme etc for KSEB connections
SURESH K S (BID ID -2368405)
SRISAKTHI ELECTRICALS (BID ID -2369512)
Bidder Name
SRISAKTHI ELECTRICALS
UNNI K
SURESH K S
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1333212.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .