Providing bore well and Supply of Fire Fighting equipment at Dumping Yard in Gudivada Municipality Est:5,20,000/- Fund: General

Supply and Transportation of 5 HP 12-16 stage 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.MAT-03667

Manufacture, Supply, & Delivery of od 63 mm HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 8KG/SQM

Manufacture, Supply and Delivery of Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes. 180mm Dia

Slotting charges for 175 mm dia PVC blue casing pipe per RM

Drilling of Bore hole (which may be carried out by pilot bore hole) to a finished dia of 200/225/300 /350/450 mm hole (for insertion of 110/140/160/180/200mm PVC Pipe / 175/200mm PVC Blue casing pipe) by Rotary drilling rig in all formations suitable for Rotary drilling such as alluvium, Loamy, clayey, sandy, burried channels, highly disturbed and bouldary zones high sheared and fractured zones followed by jointed to massive soft, medium rock, all formations typical and suitable for rotary drilling etc. including insertion of casing pipe , couplings, cap, plug fixation, and including filling the peripheral gap with rebullied pebbled gravel packing, bore development, conducting yield test, and all other required in the fixation of pipes assembly etc. but excluding the cost of casing pipe, couplings, dummys, clamps etc., as recommended by the departmental Geologist. The bore should be developed with compressor air until clear water free from sand and other materials continuously discharged. The size of gravel used for gravel packing should be as per ISI specification used for rotary tube well. The pebbled gravel packing should be carried out in such a way that the theoritical quantity consumed completely. The entire work to be carried out as per I.S. 2800 Part - I & II of 1979 and including cost of all materials and all labour charges and excluding all taxes etc.,Drilling of Bore well of 200/225/300 mm dia for insertion of pipe dia of 100/125 mm

Supply & Fixing of 180 mm dia PVC Bore Cap per 1No

Supply, Delivery of D.I Double Flanged Swing Check type Reflux valves (Non Return Valves) offollowing dia. conforming to IS- 5312 (Pts-1&2) (withamendments up to date, if any)having Body, Cover, Door, Bearingholder with D.I; Hinge pin, Door pin , Door suspension pin with Stainless Steel (IS 6603); Bodyseat ring , Door face ring, Bearingbushes, Plugs for hinge pin with Leaded Tin Bronze ( IS 318 ); Bolts, Nuts with Carbon steel;Gaskets with Rubber; Hinges with Cast steel; excluding transportation and all taxescomplete.

Cost and supply of SS Nipple including all labour charges

Cost and supply of MS Clamps including all labour charges

Cost and supply of 65mm GI Couplings

Cost and supply of 65mm GI Long bends

Cost and supply of 65mm MS Flange sets

Supply of 3 Core 4.0 Sq.mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990.Makes: As per list of recommended brands as category I

Fabrication ,transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets.Makes: As per list of recommended brands Voltmeter ; 0-500 V 96x96mm size. 0 to 20 Amps / 0 50 Amps Ammeter (96x96mm size)-1No. Single phase preventor of suitable range -1 No. 32 A TP, 10KA MCB.Indication lamps (R-Y-B) with switch control - 1setVoltmeter & Ammeter selector switch - 2 Nos Supply and fixing of ISI Mark suitable capacitor Upto 7.5 HP with DOL Starter of.

Supply of 6 sqmm .ISI marked WPSC (Weatherproof Single Core) ISI Aluminum Wire.

Earth work excacvation including all soils for trench, Pole Pit Earth Pit etc., complete for finished item of work

Plain Cement Concrete in (1:4:8) proportion nominal mix for foundations and under flooring bed using 40mm size (SS5) hard blasted Grabite metal from approve dquarry incluidng cost and conveyace of all materials like cement, sand, coarse aggregate, water etc., to site including cost of seigniorage charges and all other taxes on all materials and including all lablur charges for machine mixing. laying concrete, ramming finishing top surface to the required level, curing etc., complete for finished item of work

Vibrated Reinforced Cement Concrete M20 Design mix using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, using a minimum quantity of 330kgs of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand). coarse aggregate water elc., to site and cost of seigniorage charges and all operational, incidental and all other taxes etc., machine mixing laying concrete vibrating, lift charges curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work

Providing High Yield Strength Deformed steel bars (Fe 415 grade as per IS:1786-1979) of difference diameters, including labour charges for cutting bending to required sizs and shapes placing in position with cover blocks of approved materials and size and tying firmly with MS binding wiere of 20SWG, forming grills for reinforcement work as per approved designs cover blocks and all incidental operational labour charges such as cutting, bending, placing in position tying etc. including sales and other taxes on all materials etc., complete for finished item of work in all floors

Cost and Supply of 50mm dia fire fighting heavy-duty, high-pressure lubber lining canvas 15mtr hose pipe with male and female Gunmetal/stainless steel couplings including Transportation and all other charges etc,. Complete.

Cost and Supply of 50mm gun metal Branch pipe fire hose nozzel including including Transportation and all other charges etc,. Complete.