C/O left out work of Existing Mayor Office building at near DMC office Dharamshala in Ward No.6

Amount

Providing and laying cement concrete 1:8:16 (1cement: 8sand:16graded stone aggregate 20mm. nominal size) and curing complete on slab and floor excluding the cost of form work. screed laid under flooring.including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as t give a fair finish including centring, shuutering, shuttering and propping etc, with wooden battens and billies, height of propping and centring below supporting floor to ceiling not exceeding 4Mtrs. and removal of the same for insitu-reinforced concrete & plinth concrete work in Columns, pillars, posts and struts Square, rectangular or polygonal in plan including carriage of material in all leads and lift and direction of Engineer-in-charge.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Beams, cantilever, girders and lintels sides and soffits of beams, bean haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. In depth in all hights from floor including carriage of material in all leads and lift and direction of Engineer-in-charge.

Edges of slabs and breaks in floors and walls including carriage of material in all leads and lift and direction of Engineer-in-charge.

concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in Column, pillars, posts and struts upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Lintels, beams girders bressumers and cantilevers upto floor two level including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing mild steel/Tor steel reinforcement for R.C.C. Work including bending, binding and placing in position complete upto floor two level Tor steel including carriage of material in all leads and lift and direction of Engineer-in-charge.

Brick work using common burnt clay building bricks in super structure above plinth level up to floor two level 2nd class Brick in cement mortar 1: 6 (1 cement : 6 sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Half brick masonary in common brunt clay building bricks in super structure above plinth level up to floor two level 2nd class Brick in cement mortar 1: 4 (1 cement : 4 sand) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames wrought, framed and fixed in position.with 2nd class Deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

P/F panelled glazed or panelled and glazed shutter for doors windows and clerestory windows i/c back enamelled iron butt hinges with necessary screws 40mm thick 2nd class Deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 2nd class deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing 40x3 mm flat iron hold fast 40cm. Long including fixing to frame with 10mm diameter bolts & nuts and wooden plugs and embeding in cement concrete block 30x10x15cm. 1:3:6 ( 1 cement : 3 sand: 6 graded stone aggregate 20mm nominal size) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing bright finished anodised aluminium sliding door bolt anodised colour and shade with nuts and bolts- 300 x 16mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing bright finished anodised aluminium tower bolt ( barrrel type) anodised transparent or dyed to required shade- (i) 200 x 10 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing bright finished anodised aluminium tower bolt ( barrrel type) anodised transparent or dyed to required shade-(ii) 100 x 10 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

P/F aluminium handle anodised transparent or dyed to required shade with (i) 125 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

P/F aluminium handle anodised transparent or dyed to required shade with (ii) 100 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing hydraulic door closer with screws etc complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing oxidized M.S. hooks and eyes. 150 mm including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. Particle board (bwp phenol bonded exterior/interior grade) Cement bonded particle board. 6 mm thick including carriage of material in all leads and lift and direction of Engineer-in-charge.

P/L white /coloured glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 ( 1 cement: 3 sand) and jointed with cement slurry including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and laying spartic ceremic tiles 5.5mm thick in flooring (300x300mm. size)treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement: 3sand)finished with flush pointing in white cement including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 10mm thick antiskid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in the flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 ( 1 cement: 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 100mm dia pipes including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 100mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

PVC shoe 150mm dia including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing M.S. BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 15 cm. wide 45 cm. overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.80 mm thick sheet including carriage of material in all leads and lift and direction of Engineer-in-charge.

Steel work welded in built up sections, trusses and framed work, i/c cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In trusses and trussed purlins in buildings including carriage of material in all leads and lift and direction of Engineer-in-charge.

In beams joists channels, angles, tee, flats with connecting plates or angle as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing wood primer pink including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coat ( excluding priming cost ) on new wood and wood based surfaces with enamel paint to give and even shade including cleaning the surface of all dirt, dust and other foregin matters, sand papering & stopping with enamel paint other than white including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying priming coat on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt,dust and other foreign matter and sand papering as required with White paint including carriage of material in all leads and lift and direction of Engineer-in-charge.

Painting two coat ( excluding priming cost ) on new steel and other metal surfaces with enamel paint to give and even shade including cleaning the surface of all dirt, dust and other foregin matters with enamel paint other than white including carriage of material in all leads and lift and direction of Engineer-in-charge.

6 mm Cement plaster to ceilling in Cement morter 1:4 ( 1 cement: 4 Sand ) including carriage of material in all leads and lift and direction of Engineer-in-charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/ stone walls for interior plastering upto floor two level i/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finishing even and smooth Cement morter 1:6 (1 cement: 6 Sand ) including carriage of material in all leads and lift and direction of Engineer-in-charge.

15mm Cement plaster in single coat on the fair side of brick/ concrete/ stone walls for interior plastering upto floor two level i/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finishing even and smooth Cement morter 1:6 (1 cement: 6 Sand ) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces ( two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of material in all leads and lift and direction of Engineer-in-charge.

Wall painting(Two coat)with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including thoroughly brushing the surface clean of all dirt grease,loose pieces of scale and sand papered smooth including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing 12mm thick and 100 mm wide palmet with 25mm diameter wooden curtain rod and brackets including fixing with 25x3mm M.S. flat 10 cm long and plugs etc. complete. 1st class deodar wood including carriage of material in all leads and lift and direction of Engineer-in-charge.

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill including carriage of material in all leads and lift and direction of Engineer-in-charge.

RAKESH RANA

pardeep kumar