REPAIR AND MAINTENANCE TO MD ACCN IN LANCER LINE- I AND II, JSI OFFICER, JOI AND BOGRA MESS UNDER THE AREA OF AGE B/R-I OF GE (ARMY) No.1 JODHPUR

Amount

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each complete all as specified and as directed.

Taking down of mild steel window and ventilators any type incl guard bars omplete all as specified and as directed.

M&L for factory made Pressed steel frames for doors size 105x60mm with one rebate including necessary fixing lugs, hinges, lock strike plate, etc complete, as specified,supplied and fixed

M&L for framed brackets for door frames and cooler stand made of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 and used for step/stairs, walk ways; railings; frame work of water tanks and similar work complete all as specified and as directed.

M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone agg as in filling under steel door frames & hold fast blocks etc complete all as specified & directed

S&F for MS hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; and similar small articles conforming to Fe-290 Gde-E-165 with welding and necessary item complete all as specified and directed.

M&L for 35mm thick factory made 2nd class hard wood glazed and skelton shutter and open rebated and prepared to receive glass, gauge etc (without sash bars), edges or framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I Section 8 Clause 8.24 (a) complete all as specified and directed.

S&F 35 mm thick factory made second class hard wood plain framed panelled shutter (Two panel) with lock rail and pannel of 9 mm thicks BWP commercial ply or 12mm veneered particle board with commercial veneered on both faces the size of rails and style as per IS-1003 (Part-I) kiln seasond and chemicadly pressue treated, complete all as specified and as directed.

M&L factory Made flush shutters, 35 mm thick solid core construction with particle board both face covered with decorative face veneer, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing & Fixinng Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately)

S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing With Wood free EPS complete all as specified & directed

S&F factory made box type windows (steel) with side hung shutter with coolar opening with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle with glazing bars dovetailed or welded. Note.:Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same complete all as specified.

S&F Factory made box type steel window with pintol hinges & 2 Nos 150mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified. (with or without cooler opening complete all as specified & directed)

S&F Factory made box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars or without glazing bars complete all as specified.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified & directed

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm complete all as specified & directed.

S &F of Stainless steel butt hinges medium weight, cold rolled of size 100 mm size complete all as specified & directed.

S &F of mild steel butt hinges medium weight, cold rolled of size 100 mm size. complete all as specified & directed

S&F 200mm long aluminium anodised tower bolt incl screw complete all as specified & directed

All as per item No. 22.00 here-in-above but herein as repairs.

S&F 150mm long aluminium anodised handle extruded section incl screw complete all as specified & directed

All as per item No. 24.00 here-in-above but herein as repairs

S/F for 250mm long and 12mm dia aluminium alloy anodised sliding door bolt with hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

All as per item No. 26.00 here-in-above but herein as repairs

S&F Sheet glass ordinary quality 3mm thick and glazing with oil putty in square not exceeding 0.5 Sqm each pane complete all as specified and directed.

S&F Sheet glass ordinary quality 3mm thick and glazing with oil putty in square not exceeding 0.5 Sqm each pane including hacking out of old glass from any frame complete all as specified & directed

S&F for 4 mm thick figurred, pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane.complete all as specified and directed.

Providing and fixing polyvinyl chloride (PVC) sheet frame of width 100-150 mm & 18 mm thickness made out of extruded 18mm PVC sheet and joined with suitable Cement Solvent adhesive and screw.The frame shall be fixed to the wall using 75mm long M.S. Screws through the frame by using PVC fasteners. Minimum 3 Nos. screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc as in repairs to replace old or decayed boarding complete as per manufacturers specification and complete all as specified & directed

M&L for 18 mm thick solid PVC sheet in one of two different colours( with wood grain printed pattern/ ivory clour finish) as in kitchen cabinet shutters ,all round body of cabinets , shelves ,drawers etc cut to required size jointed with solvent cement & steel screws etc as in repairs to replace old or decayed boarding complete all as specified & directed .

S&F 0 degree clip type self closing hinges for cabinets fized with cadimum coated screws all as per sample. complete all as specified & directed

S&F 100 mm size bright finished cromium plated steel handle of approved shape & design fixed with cadmium coated screws on the kitchen cabint shutters complete all as specified & directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as specified & directed

S&F drawer runners folding type with guide channels & sliding channel with approipiate ball bearing/ rollers etc complete to obtain smooth movement of the drawers complete all as specified & directed

S&F Magic eye brass body 15 to 20 mm dia all as per sample including drilling necessary hole in panel door shutter complete all as specified and directed.

M&L for repair to pressed steel cupboard shutter including replacement of hinge, mortice lock, handle etc and fixed to wall making them in serviceable condition and refixing on same opening making the wall surface good condition complete all as specified & directed.

M&L for repair to window including taking down replacement of unserviceable hinges device box type handle making them serviceable condition and refixing on same opening making the soffit and jamb good condition complete all as specified & directed.

Demolition of cement concrete in ground floor / paving not exceeding 15 cm thick below or above GL unreinforced complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified & directed..

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified & directed.

M&L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in subbase to floor finishes etc complete all as specified and as directed.

M&L for 18 - 20mm thick Udaipur green marble machine cut in cooking platform, window/door cill laid over 10mm thick screed bed in CM (1:4) and jointed with grey cement slurry, pointed with white cement with admixture of pigment to match the shade of granite stone including polishing and rounding the edges complete all as specified and directed.

M&L for 16-18 mm thick machine cut one side polished black granite in kitchen plate form and windows cill, set and jointed including 20 mm thick screed bed in cement mortar 1:3, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing complete all as specified and directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Non-skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry over and including 15mm thick screed bed or bedding layer of cement mortar 1:4 for laying floor finishes complete all as specified and directed.

Ditto all as per Item No 46 & 47 above but here as in skirting/daddo etc set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar 1:3 on fair faces of brickwork or concrete surfaces to receive wall finishes complete all as specified & directed.

M & L Vitrified double charged ceramic tiles light shed 10 mm thick (squre/retangular) polished, area exc 0.36 Sqm but n exc 1.20 Sqm of each tile as in floor/skirting/dado etc set and jointed in neat cement slurry and pointed in white or colured cement including 15 mm thick screed bed in CM 1:6 to match complete all as spcified.

M&L for coloured glazed ceramic tiles area of each tile 450x300x7mm/600mmx300mmx7mm thick over and including 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado complete all as specified and as directed.

M&L for coloured glazed digital ceramic tiles area of each tile exc 0.72 Sqm but n exc 2.4 Sqm of 10mm thick over and including 10mm thick rendering in CM (1:4) set and jointed with adhesive solvent mixed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) all as specified and as directed.

Taking down cement plaster on stone masonry RCC surfaces, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water complete all as specified & directed.

M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement all as specified.

M&L 15mm thick cement plaster in CM 1:4 on other than fair surfaces or over stone masonary surface faces finished the surfaces even & smooth without using extra cement at height uto 10mtr all as specified and directed.

M&L Rendering 10 mm thick in CM (1:3) on concrete surfaces on ceiling / facia /RCC Chaja projection etc all as directed & finished even & smooth complete all as specified & directed.

S&F GI chicken wire mesh of 1.40 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC ceiling/ chajjas/fascias etc complete all as specified & directed..

Raking out joints/ pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar all as specified

M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified & directed..

M/L for preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemper over a coat 1.0 - 2.0 mm thick wall care putty, including rubbing with sand paper to obtain a smooth surfaces and making undulations and a coat of primer of wall surface complete all as specified & directed.

M&L for Preparation of new undecorated plastered/ concrete surfaces of wall and applying two coats of cement base paint over a coat of priming surface complete all as specified and directed.

M&L for three coats of white wash including preparation of new surfaces as on ceilings all as specified and as directed.

M&L for prep of the new surfaces of steel & applying two coats of synthetic enamel paint over one coat of red oxide primer over 10 Cm width or girth all as specified.

M&L for one coat of synthetic enamel paint on old steel surface including preparation of surface, over 10 cm width or girth all as specified.

M&L for two coat of synthetic enamel paint over a coat of pink primer on new wooden surface including preparation of surface, over 10 cm width or girth all as specified.

M&L for one coat of synthetic enamel paint on old wooden surface including preparation of surface, over 10 cm width or girth all as specified.

Complete removal of existing treatment on wall surfaces by wire brush and preparation of old surfaces of any description complete all as specified.

M&L for applying avg 2 mm thick wall care putty, including rubbing with sand paper to obtain a smooth surfaces and making undulations of wall surfaces (preparetory for OBD) complete all as specified and directed. Note :- Rate are deemed to be included for scaffolding, trestles,ladders, cradles, etc neccessary for execution of work and protective/safety measures complete all as specified & directed.

M&L for Preparation of new or undecorated plastered/ concrete surfaces of wall and applying two coats of distemper oil emulsion, over a coat of primer on wall complete all as specified and directed.

M&L for Preparation of old decorated plastered/ concrete surfaces of ceiling/chajja projection by washing rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion on wall complete all as specified and directed.

M&L for Preparation of old decorated plastered/ concrete surfaces of walls by washing rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion on wall complete all as specified and directed.

M&L for Preparation of old decorated plastered/ concrete surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and making surface even and applying one coat of cement base paint complete all as specified and directed.

‘Supply and Fixing’ three layered Rotational moulded polyethylene water storage tanks Capacity 500 ltr (cylindrical vertical with closed top) include for hoisting into position either inside or outside of building, connecting up pipes, securing access covers etc all as specified incl 25 mm dia CPVC tank adaptor including dismantling existing water tank (PVC/RCC) and removing from site complete all as specified & directed..

All as per item No. 72.00 here-in-above but herein cap 1000 ltrs

M&L for 100 thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in water tank plateform over roof top finished even and smooth complete all as specified and directed.

S&F as in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s .) all as specified & directed.

Supplying and laying of CPVC pipes SDR 11 with (plain or special use as per site condition) all brass fittings (brass elbow, brass tee male / female threaded brass adopter etc) CPVC SDR 11 fittings on walls/ceiling to walls or ceiling or laid in floors including cutting chases, pinning in & making good to disturbed portion to match the existing surface for 16 mm dia pipe upto date including taking up or down existing GI/CPVC water tubing 15/16 mm bore and connection or remove to site complete all as specified & directed..

All as per item No. 76.00 here-in-above but here in 20 mm dia pipe

All as per item No. 76.00 here-in-above but here in 25 mm dia pipe .

S&F in repairs 15mm bore bib tap long body brass chromium plated fancy type with capstan heads, screwed down, screwed for iron pipes complete all as specified & directed.

S&F in repairs 15mm bore angular/stop valves cast copper alloy chromium plated fancy type (ISI marked) screwed down high pressure screwed both ends for 15mm bore of iron pipe or union complete all as specified & directed.

S&F in repairs 15 mm bore two way angle cock brass chromium plated fancy type of or techno commercially equivalent of any make specified complete all as specified & directed..

S&F in repairs 125mm size brass chromium plated shower rose with shower arm including fixing to steel pipe or union complete all as specified & directed.

S&F in repair 20mm bore stop valves cast copper alloy (ISI marked) screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union and fixed in repair complete all as specified & directed.

S &F in repair 25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia complete all as specified & directed.

S&F swan neck long shank Pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified & directed..

S&F as in repairs 15mm bore CP central hole basin mixer popup waste system with 450mm long copper pipe and brass nuts ISI Marked complete all as specified & directed.

S& F as in repairs 15mm bore CP Wall mixer 3-in-1 system with adujstable wall flange complete all as specified and directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges as in repairs complete all as specified & directed.

M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified & directed..

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide 600mm long with aluminium alloy brackets and gaurd and railing 60cm long complete all as specified & directed.

S&F in repairs decorative type curtain rod stainless steel finish of pipe 25 mm x2mm thick dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end complete all as specified & directed.

S&F in repairs MS chromium plated peg set of five each solid body, 600mm long fixed to wall with rawl plugs and screw complete all as specified and directed.

S&F in repair Soap dish, cromium plated , any type, fixed to plugs with chromium plated brass screws all as specified and directed.

M&L 32/40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins and urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed..

S&F in repair PVC waste pipes of 40/32mm bore, 900mm long suitable for wash hand basins/sinks complete all as specified & directed.

S&F in repair sinks made of stainless steel 1.00 mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or fixing in RCC slab and connecting waste coupling and to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F as in repairs stainless steel plate rack of size 30"x24"x10" size as per trade pattern fabricated with 0.60mm thick stainless steel sheet suitable for stacking 15 plates with hooks /fittings complete all as specified & directed.

S&F in repairs Wash Basins,Vitreous China,white ,flat back,size 550x400mm including brackets and cutting for and pinning in ends of brackets or erecting stand inclduing swan neck pillar tap cast copper alloy chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including CP waste 32mm and PVC waste pipe 900mm long complete all as specified & directed..

S&F in repairs Wash Basins,Vitreous China,white ,corner/ flat back,size 450x300mm including brackets and cutting for and pinning in ends of brackets or erecting stand inclduing pillar tap cast copper alloy chromium plated fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed including CP waste 32mm and PVC waste pipe 900mm long complete all as specified & directed.

S&F as in repairs vitreous china squatting pan ,'Orissa' pattern, size 580 x 440 mm white, with integral foot rests (excl fixing bolts, flushing cistern and flush pipe) including provision of cement concrete bedding white making good to disturb floor complete all as specified and as directed.

S&F as in repairs vitreous china wash down water closet European type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed.

S&F as in repairs vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover complete incl fixing of flush pipe etc complete all as specified and directed.

M&L PVC valveless, syphonic action type, 10 ltrs cap flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe 32mm dia and fixed in repairs complete all as specified & directed..

M&L replacement of internal flushing cistern fitting (accessories kit) for low level, make as per existing fitting, complete all as specified and as directed.

S&F in repair 15mm bore PVC connection (for Flushing cistern) 450mm long best quality with PTMT nuts complete all as specified and directed.

S & F in repairs bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed (minimum weight 15 mm 90gm), screwed both ends for iron pipe etc complete all as specified and as directed.

S&F in repair CP brass health faucet with 1200 mm long flexible tube with wall hook and chromium plated two way angle valve, complete all as specified and as directed.

S&F in repairs plastic water closet seat cover white closed patteren with flat bottam and cover and mild steel chromium plated or al hinges device complete all as specified and as directed.

S&F in repairs of CP mild steel grating with or without hole 125 mm dia, complete all as specified and as directed

Dismantaling of cast iron/pvc soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified & directed.

Dismantaling of cast iron/pvc soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified & directed.

Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenchescomplete all as specified & directed. (with all fitting)

Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified. (with all fitting)

Supplying and laying of 75 mm dia UPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

Supplying and laying of 110 mm dia CPVC pipes SWR fittings on walls / ceiling or laying in floors complete all as specified. (with all fitting)

S&F for 75 mm bore UPVC bends any radius with oval acess door complete all as specified & directed.

S&F for 110 mm bore UPVC bends any radius with oval acess door complete all as specified & directed.

S&F for 100mm bore UPVC cowls, diminishing pieces or tapers (larger bore measured) complete all as specified & directed.

M&L for 75mm bore UPVC branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.

M&L for 100mm bore UPVC branch piece single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.

Demolition of stone masonry /block walling built in cement mortar complete all as specified & directed.

M&L for precast cement concrete solid building blocks type B1, 1:2:4 (20mm graded stone aggregate) n.exc 10cm thick setting in 1:4 cement mortar, complete, in walls all as directed.

M&L Machine cut 50mm thick sand stone slabs in sunshades, chajjas, shelves, cills, landings cover slabs on manholes stones templates etc n exc 2m in length punched dressed on face and along exposed edges self faced on other side and set and pointed in cement mortar 1:4 thickness complete all as specified & directed.

M&L for Squared rubble walling Jodhpur type, regular coursed, well bonded, bedded and solidly hearted, built in CM 1:6 curved on plan to a mean radius n exc 6m complete all as specified and as directed

Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression froom a straight edge not exc 20 mm complete all as specified & directed.

M&L 75 mm thick PCC (1:4:8) type D2 using 40mm gradded stone aggregate as in sub based or floors complete all as specified & directed.

M&L for Endura/ textured finished external grade tiles of 30cmx30cmx10 mm thick, set, jointed and pointed in white cement and pigment match to colour, laid over and including screed bed or bedding layer of 20mm thick in CM 1:4 complete all as specified and as directed.

Demolition of Cement concrete (unreinforced) of any description and in any position as in floor including removal of debris from site complete all as specified.

Repair/replacement to sunken floor with 15 mm thick plastering in CM 1:3 of internal surface with WPC than applying with bitumen grade VG 30/ 40 over a coat of bitumen primer putting 50 micron polythene than filling with PCC 1:5:10 type E-1 using 40mm graded stone aggregate and inserting 600x50 mm bore GI water pipe light grade spout incliding demolition and Removing of existing filling in sunken floor wc/ bath/ kitchen and complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified & directed..

Demolition of cement concrete and existing roof treatment and preparing surfaces to the entire satisfaction of Engr-in Charge /GE including taking down existing plaster, padding,cleaning of all foreign material such as grass roots dust etc and roughening the concrete surfaces by wire brushes and washing down to remove dust etc . flushing at junction of parapets complete and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

M&L for Roof padding in PCC 1:2:4 type B0 (using 12.5mm graded stone agg) laid to a minimum consolidated thickness 50mm to provide a finished slope 1:30 all as specified & directed.

M&L for 20 mm thick plaster with CM 1:3 on roof surface mixed surface even and smooth mixed with water proofing compound as per manufacturee instructions (Note: - WPC shall be measured and paid separately).complete all as specified & directed.

M& L for roof treatment with UV stable single component fibre reinforced elastomeric liquid applied water proofing membrane having solid content of 55% formulated wih PU hybrid polymers and reinforcing acrylic fibres and having sun reflectivity Index (SRI) of 106. The application of the material should be done in three coat (6 hr gap after each coat) on the substrate, applying first self priming coat at ratio of damp proof ultra and water 3:1 then 2 undiluted coat of damp proof ultra obtaining coverage @1 ltr/10 sqft in two coats (10-12 hrs gap between each coat. The vital physical and chemical parameters shall be as under. Min elongationat break of 350%, crack bridging ability of 2.5 mm @650 microns thickness, resists positive hydrostatic pressure of up to 10 bars. The material shall be appliied with brush or roller, complete in all respect as per the direction of Engr-in charge/consultant. Also, proper surface preparation along with covingat corners is must. Note : - 1.The authorized applicator of manufacturer shall be approved by GE.

NOTE:- (i)- The contract sum shall be arrived at after duducting amount of schedule of "Credit" from the Total quoted amount

mahalaxmi enterprises (BID ID -3410297)

Narendra General Suppliers (BID ID -3410307)