8461/E8 SPECIAL REPAIR OF OTM BLDG NO T-137 OF INF BN-III AND PROVN OF TOILET BLOCK AT MADHUBAN COMPLEX AT SHAHJAHANPUR CANTT UNDER GE (EAST) BAREILLY

Amount

Taking down of chowkhats or frame exc 1.5 Sqm but n.exc 4.0 Sqm (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or window frames n.exc 1.5 Sqm each (without taking off shutters from frames) complete all as specified and directed.

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and including decorative laminate 0.60 mm thick type 1 of surface finish and other side balancing white laminate 0.30 mm thick, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F 35mm thick factory made 1st class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F of pressed steel frames for doors 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

S & F of pressed steel frames for doors 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified.

M & L for PCC type B-0 1:2:4 as in roof kerbs or mud stops, rounded or chamfered on edges, fixing of hold fasts, and filling of pressed steel frames.

S & F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. Note: S&F rates, include for anodised aluminium hard ware as indicated, pvc roller, glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted welded or forged into spikes.framed guard bars iron doors.ladders framed balusters, walk ways. Railings, frame work of water tanks and similar work conforming to Fe 290.Gde-E-165 complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and directed.

S& F stainless steel wire clothes 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and as directed.

S&F mild steel spring for doors 300mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 300mm long stainless steel grade 304 Sliding door bolts, bolt or clip type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specifieed and directed.

M&L for 150mm long mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing all as specifed and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed.

S&F, 200 mm long stainless steel heavy duty barrel tower bolts and fixed as specified and as directed.

S&F 100 mm long Butt hinges, stainless steel heavy duty (2.00 mm thick) with SS hinge pin, and fixed complete all as specified and directed.

S&F 150 mm stainless steel grade 304 handles D type complete all as specified and as directed.

M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation all as specified and directed.

M&L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying Two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing , steps, cills, sunshade , shelves,lintels, etc and cutting chases for concealed conduit wiring , etc and making good, cutting not exc 20 cm girth all as specified and as directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue , anodised, with hard drawn steel spring, fixed in floor all as specified and as directed.

S&F curtain rod 25mm dia , stainless steel grade 304, finials and fixing bracket etc for hangging curtain rod complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed.

M & L Glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white cement or colour cement over and including 10 mm thick in CM 1:4 complete all as specified and as directed.

M&L providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n xc 0.18 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M&L for vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry over and over and including 15 mm thick screed bed of cement mortar in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified

M&L providing vitrified ceramic tiles light shade 7-8 mm thick (square/rectanglar) polished area of each tiles n exceeding 0.36 sqm in dado/skirting etc set and jointed in neat cement slurry over and including 10 mm thick cement mortar rendering in 1:4 and pointed in white or coloured cement to match coloured tiles complete all as specified

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and as directed.

M&L brushing neat cement slurry with 3.0 Kg of cement per sqm and complete all as specified and as directed.

M&L for machine cut mirror polish kota stone slab flooring 18- 20mm thick over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigmen to match the shad of the slab including rubbing and polishing complete all as specified.

M&L for machine cut mirror polish kota stone slab 15-18mm thick with rounded edges as in risers of steps, skirting, dado etc including rubbing and polishing complete all as specified.

M&L for 20mm thick granite stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc all as specified and directed.

M&L rendering 12mm thick in cement plaster 1:6 on surfaces other than fair faces of brick work and surface finished even and smooth without using extra cement all as specified and directed.

M&L rendering 15mm thick in cement plaster 1:4 on surfaces fair faces of brick work and surface finished even and fair without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement plaster 1:4 on concrete surfaces of ceilling all as specified and directed.

M&L three coat of white wash on walls including preparation of plastered surface and complete all as specified and directed.

M&L for 2 mm thick Wall putty on old/newly plastered walls all as specified and directed

M& L for two coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, on wall/ceiling as per manufacturer's specification.

M & L for finishing walls with acrylic Smooth exterior paint of required shade : New work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

M&L for preparing newly plastered surfaces of ceiling and applying three coat of white wash complete all as specfied and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for machine pressed cement concrete tiles 25cm x 25cm x 22mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C-2 (using 40 mm graded stone agg) as in plinth protection /Path finishing cement concrete even and smooth without using extra cement all as specified and directed.

M&L 40mm thick PCC 1:2:4 type B1 using 20mm graded stone agg laid in panel finished even & smooth with using extra cement as in flooring complete all as specified and as directed.

Supply only glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and directed.

Demolition of cement concrete (unreinforced) in roofs, floors (other than ground floors) beams, staircases, landing, chajjas and similar suspended work all as specified and directed.

M&L Plain PCC 1:2:4 type B1 using 20 mm graded aggregate as in roof for maintain the uniform slope etc any thickness all as specified and directed.

M&L for preparation of roof surface applying a coat of hot bituminous primer @ 0.30 kg/sqm and applying a coat of industrial bitumen 85/25 @ 1.20 kg/sqm over primer and laying modified polymeric water proofing membrane mineral type top (weight not less than 4 kg/sqm, 3mm thick consisting 100 mm micron HMHDE FILM ) over 10 mm thick rendering in CM 1:4 including integral waterproofing compound 3% as per manufacturer instruction and complete all as specified and directed

Demolition of cement concrete (un reinforced) of any description and in any position not other specifically provided for all as specified and direcetd.

M&L for preparation of Sunken floor removing of all existing treatment, brick bats and cleaning the surfaces (a) Applying a coat of cement slurry with sika latex power @ 3% by weight of cement (b) 2nd layer 20 mm thick plaster CM 1:3 mixed with sika latex power as per manufacures instuctions i.e 3% by weight of cement (c) 3rd layer applying high preformance plyuerethane liquid membrane roof coating cold applied in two coat @ 1.5kg/sqm each coat applied with spray/brush and elongation of 300% to 700% (d) 4th layer applying prime coat @ 0.15kg/sqm and a geotextile of 40 GSM fixeded in the ratio as per manufacturers specification, and (e) 5th layer PU coat in two layers as per manufacturer instruction, final PU coat is sprinkled with a micro layer of sand complete all as specified and directed (testing of leakge for sunken slab will be done as per relevant IS)

M&L for cement concrete (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B0 ( using 12.5mm graded stone aggregate) as in base of floors cover fillet/beads of with wpc @ 3% all as specified and directed.

S& in repair vitreous china squatting pan "Orissa" pattern size 580mmx 440mm white with integral foot rests excluding flushing cictern and flush pipe all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti syphonize pipe etc complete all as specified and as directed.

S&F in repair plastic water closet seat cover black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device all as specified and directed.

S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair vitreous china wash basin white, oval type as on granite platform including cutting and fixing excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe or as on RCC shelves top all as specified and directed

S&F in repair only 32mm dia waste fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed.complete all as specified and directed.

S&F repair 15mm bore wash basin mixture cast copper allloy with capstan head Chromium plated scwed down with or without letter hot or cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

S&F in repairs bib taps 15mm bore chromium plated with crutch or butter fly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and direcetd.

S&F in repair angle cock cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half Stall type(back or corner wall type) complete including providing and fixing plugs,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing automatic flushing cistern with brakctes flush pipe grating and union for discharge pipe

S&F vitreous china urinal partition white of size 310X700mm complete all as specified and direcetd.

S&F, Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and direcetd.

S&F 600mmx450mm bevelled edges mirror with PVC beading fixed to plug with chromium plated nut/screw complete all as specified and directed

S&F PVC connection 15mm bore length not less than 300 mm long with both ends PTMT nuts complete all as specified.

S&F PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts complete all as specified.

S&F 75 mm dia PVC (SWR) floor trap plain with greting incl jointing with solvent cement all as specified and direceted.

S&F in repair swivel shower rose dia 120 mm of brass Chromium plated for fixing with 15mm pipe fixed all as specified and directed.

Dismantling of existing water tanks capacity exc 500 ltr n exc 1000Lts and removing to store complete all as specified and directed.

S&F rotational moulded polethylene water tank of 1000 ltrs capacity ( cylindrical vertical with closed top) hoisted and fixed in position triple layer in white colour all as pacific SSR Part- I, including metalic cover (GI basin as cover) complete all as specified and directed.

S&F 20 mm bore CPVC gate valves for CPVC pipe all as specified and directed.

S&F 20 mm bore Ball valves ,high pressure with polythene float and flynut complete screwed for iron pipe or brass ferrule all as specified and directed.

Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 15mm bore all as specified and directed.

Taking up or down existing steel tubing and connections incl cleaning for refixing or removal to stores complete all as specified and directed for 20mm bore all as specified and directed.

S&F 15mm bore supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with solvent and testing for leakage complete all as specified

S&F 20mm bore Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors with solvent and testing for leakage complete all as specified

S&F 15mm bore female Brass Threaded Adaptor (FTA/ FBTA) on walls/ceiling or laying in floors complete all as specified

Taking up or down existing asbestos cement pressure pipe any class, (including all fitting) including disconnecting pipes 75/110 and fittings complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints laid in trenches or in floors all as specified

S&F in repair 75 mm bore PVC (SWR) pipes of single socketed in any length with rubber ring joints and solvent cement complete fixed to wall with clamp all as specified and directed.

S&F 75 mm bore PVC (SWR) bends all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches all as specified and directed.

S&F in repair 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall all as specified and directed.

S&F 110 mm PVC (SWR) bend any radius all as specified and directed.

S&F 110mm dia PVC (SWR) junction single (Single T) equal or unequal with access door all as specified and directed.

S&F stack clamps out of 20mmx3mm flat iron for fixing of PVC pipe 75 mm/100 mm dia including securing ends of stays to ball or roof all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, and precast concrete articles etc complete all as specified and directed.

M&L brick work with fly ash bricks (old size) straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L brick work with fly ash bricks (old size) straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and as directed.

Chipping of unsound/weak concrete materials of from slabs/chajja, Column/beams with standard power driven percussion type or pneumatic chiesel of standard make including tapering all edges, making square shoulders of cavities etc upto any height including necessary scaffolding and safety measures complete all as specified and as directed by the Engr-in-Charge..

M & L for applying single coat of epoxy bond adhesive on prepared non metallic surface (existing surface) by using brush as per manufacturers instruction / specification upto any height incl necessary scaffolding and safety measures complete all as specified and as directed.

M&L for reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in slab supported on walls , beams and columns in floors , roofs landings, balconies etc and in shelves and the like.

M&L for form work to soffits of suspended slabs such as roof slab , landings and similar works n exc 200 mm thick (horizontal or slopping) fair finished surfaces of concrete flat complete all as directed.

M&L for form work to edges of concrete flats such as roofs exc 5 cm but n exc 10 cm wide horizontal or slopping and similar work rough finished surfaces of concrete.

M&L for plain cement concrete type B1 1:2:4 (using 20 mm graded stone aggregate) as in lintels upto 1.50 m clear span, cills steps , seismic and other similar band , copings, covering , bed plates and like including weathering slightly rounded or chamferred .

M&L mild steel bars (TMT) 8mm dia, and over cut to length bent to shape required including cranking, bending spirally for hoping ends for columns, hooking ends and binding with and including mild steel wire annealed not less than

M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spaces and binders cut to length , bent to shape required including cranking , bending spirally hooping for columns , hooking ends and binding with MS wire (annealed) not less than 0.90 mm dia quality conforming to .

M&L for RCC (nominal mix) type B-1 1:2:4 (20mm graded aggregate) as in lintels.

M&L for form work to lintels etc rough finished surfaces of concrete flat.

Earth filling under floor including spreadings, levelling, watering and well ramming in layers n exc 25 cm thick.

M&L for hard core of broken stone of gauge exec 63mm but n exc 100 mm , deposited, spread and levelled in layers n exec 15 cm thick watered and rammed to a true surface all as specified and directed.

M&L for PCC 25 mm thick 1:2:4 type B0 using 12.5mm graded stone aggregate as in bases of floors.

S&F rotational moulded polyethylene water storage tank consisting of three laver cylindrical vertical with top closed hoisted and fixed in position all as specified and directed capacity 500 ltrs.

S&F in one piece vitreous china wash down water closet pan white colour including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed.

S&F 110 mm dia PVC (SWR) vent cowl.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundation etc or for shafts, well cess pits manholes , pier holes etc and getting out in soft/loose soil complete all as specified.

M&L for plain cement concrete type E2 1:5:10 (Using 40mm graded stone aggregate) in foundation , filling and mass concrete.

Returning, filling in including spreading , levelling watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified.

Removing excavated materials (Soil) not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified.

M&L for brick work with fly ash bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4.

M&L for PCC 1:2:4 type B0 (12.50 mm graded aggregate) 25 mm thick as in DPC on plinth beam horizontal or vertical surfaces including necessary form work all as specified and directed.

Taking down carefully of point wiring (Light , fan, socket or power) complete (fittings such as switches, Ceiling roses, pendants, regulator, sockets etc to be measured separately) removing from site of work and making good to the disturbed surfaces of walls/floors etc all as directed

Taking down carefully old unserviceable fittings & Fixers of any type and any size.

Taking down carefully old unserviceable by unscrewing from DB box, MCB SP/SPN/TPN of any size & any capacity .

Taking down carefully old unserviceable sub main wiring of any size .

Point wiring in concealed PVC conduit using stranded copper conductor cable of size 1.5 Sqmm, PVC insulated unsheathed FRLS cable complete with all fittings and accessories sunken cast iron or pressed steel terminal box for mounting of switches, sockets, fan regulators etc but providing new cover 3mm thick laminated,(Hylem) sheet top cover fastened with chromium plated screws and 1.5 Sqmm PVC insulated stranded copper conductor FRLSH cable as continues earth wire connected to common earth dolly all as directed and as specified for the following :- NOTE: for wiring in ceiling portion conduit shall be fixed with surface of ceiling/with trusses etc.

All as per Item No 122 One light point controlled by one switch

All as per Item No 122 One fan point controlled by one switch

All as per Item No 122 One exhaust fan point controlled by one switch

All as per Item No 122 One 3-pin socket outlet 5 Amp on independent board.

All as per Item No 122 One 3 pin socket outlet 5 Amp on same board

All as per Item No 122 One light point controlled by two way switches

All per Srl item No. 122 here-in-before, but with 2.5 Sqmm copper conductor cable complete all as specified for One 3 pin socket outlet 15 Amp on independent board.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 6sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 6 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 10 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size10 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

Material and labour for two single core PVC Insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as sub main wiring including suitable size heavy duty rigid PVC conduit and of PVC insulated unsheathed multi stranded FRLS copper conductor cable of size 4 sqmm as an earth continuity conductor complete all as specified. Note : Two run of 6.00 sqmm copper cable, one run of 6.00 sqmm copper cable and one run of conduit shall be measured as one unit.

S &F switch piano flush type polycarbonate SP one way 6 Amps complete all as specified and directed

Supply and fix in replacement two way 6 amps, 230 volts, complete all as specified .

S &F switch piano flush type polycarbonate SP one way 16 Amps complete all as specified .

S&F socket out let 3 pin 6 amp multipurpose flash type.

S&F socket out let 5 pin 6/16 Amp multipurpose, flush type 240 volt complete.

S&F ceiling rose surface Bakelite 65 x 50 mm two to three terminals complete.

S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks all as specified.

Supply and fixing LED bulb 9 watt include rechargable connection all as specified. Make: C &S

M & L for replacement of Step regulator electronic modular fan regulator flush socket type on the existing phenolic laminated sheet etc as required complete & all as specified.

Taking down Exhaust fan of any size and deposited to E/M storeyard for refixing, complete all as specified

S& F exhaust of cupper binding with capacitor 450mm complete and all as specified with Engr-in-charge.

Supply & fix 1200mm Glaze BLDC ceiling fan (white) complete with remote control and electronic type regulator and accessories 230 V,1200 mm sweep. 5 star rated all as per specified and as directed by Engr -In-Charge

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fixing 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity SPN 40 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and as directed by Engr-In-Charge.

Supply and fix in replacement MCB DB Single pole and neutral 8 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

S&F box type LED light fitting suitable for 4 ft 20 watt complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Taking down old unsv bldg security light fitting, Supply and fixing new LED bldg security light fitting 45 watts with senser to be fixed to channel and as reqd to be mounting bracket in wall/floor to suit the opening of the fitting with FI clamp, nut, bolt and washers of suitable size including making connection complete all as specified.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick, buried directly in ground, vertically to a depth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not less than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead GI wire 4mm dia by means of bolts, nuts, check-nuts and washers of galvanized iron and thimbles and of earth wire protected by galvanized iron pipe light grade 15mm bore and water pipe 20 mm bore GI medium grade with funnel and wire mesh complete including excavation and earth work, PCC chamber and cover in cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate in lieu of CI cover and frame etc all as specified and shown in electrical plate No. 5 of SSR-2009 (Part-I including testing after completion.

Supply and fix decorative light fitting 1x9watt ceiling/wall mounted LED BULKHEAD luminaire with engineering plastic housing and top frame with opal PMMA diffuser.

S&F Sheet metal enclosure TPN distribution board vertical type double door with insulated bus bar arrangement IP 43 protection 4 way 415V complete all as specified .

Taking down of TPN DB all as specified.

S&F MCCB 100 Amps 4 pole 25 KA all as specified

Taking down faulty damaged unserviceable LT under ground cable of any size.

Supply and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100V grade, cross-sectional area 25 sqmm 4 core complete all as specified .

Excavation in trenches n. exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying underground LT XLPE cable and getting soft/loose soil complete.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil all as directed and specified.

M&L for removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed and specified by Engr-in-Charge.

M& L for sand filling under floors or in foundations including watering and consolidation all as specified and directed.

Supplying and laying un-reinforced precastconcrete cable cover, but Class LV, Type I, flat, size 250mm x 150mm x 40mm all as directed and specified by Engr-in-Charge.

Supply and fix MCB DB Single pole and neutral 4 way sheet steel phospetised powder painted with 200 amps rated bus bar with IP 43 protection 240 V nautral link, earth bar and Din rail double door complete all as specified and as direcrted .

UTTRAKHAND BUILDERS (BID ID -3468593)

M/S WASEEM KHAN CONTRACTOR (BID ID -3465451)

M/S SHAHABUDDIN AND SONS (BID ID -3462065)

M/S MANSI TRADERS (BID ID -3467730)