Alappuzha Heritage Project Painting and Lighting of Ship Exhibit at Alappuzha Beach

Amount

FINISHING WORKS

Providing & applying two or more coats of Epoxy anticorrosive primer 100 microns of approved make like SigmaCover 280 or equivalent on the exhibit boat for portions such as superstructure, equipments,handrails, mast,Deck area,Boot topping etc.Rates are including preparation and cleaning of surface,thinners,scaffolding etc. complete as per the direction of engineer in charge.

Providing & applying 2 or more coats of acrylic polyurethane coating glossy finish of SigmaDur Gloss Grey 7040 or interthene 990 or equivalent and of approved colour by the architect for ship exhibit for portions such as superstructure, equipments, Handrails, mast, boot topping etc .Rates are including thinners ,scaffolding etc complete as per the direction of engineer in charge.

Providing & applying non skid epoxy paint 2 or more coats on deck area of approved make like Advoguard Non-Skid DA Grey or equivalent and approved colour as per the direction of engineer in charge including thinners ,scaffolding etc complete.

STEEL WORK

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Supply and fixing of Nylon wire rope for ship exhibit

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

ELECTRICAL WORKS

Fabrication, Supply, Installation, testing & Commissioning of Lockable type weather proof feeder pillar made out of 16 SWG CRCA sheet with view glass and consisting of following (Complete with all interconnections and powder coated painting) DIN rail, slotted PVC cable ducts and ;accessories. a.Provision for single phase energy meter, Cutouts etc b. 1 No. 25/32A DP Isolator/ Fuse cutouts. c. provision for fixing 12way single phase DB d. provision for 2nos of single phase astronomical time switch and 4nos of contactor e. knockouts suitable for cable termination and weather proof socket as per scheme NOTE:>Prepration of all drawing submitting and getting approval, submitting completion certificates and arranging inspection, getting sanction and energisation certificates from KSEB , CEI, obtaining electrical connection includes all miscellaneous expenses etc. for commissioning of the whole installation in the premises is in contractor Scope (All Statuatory Payment borne by Client upon the submission of the receipt)

Supply and fixing panel mounting type WEATHER PROOF 16A SOCKET of approved make-inclined type including wiring

2.3.7 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator2 + 8 way, Double door

Supplying and fixing 240 voltS RCBO in existing MCB DB complete with connections, testing and commissioning etc. as required.25A 30mA DP RCBO

2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

15.4.2 : Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required2 output per phase and suitable for single phase supply.

Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor,A2XFY power cable confirming to IS 7098 (part 1) amended up to date. 2CX16Sqmm

9.1.3 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm (22mm)

9.2.1 : Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 16 sq. mm

Supply of 1 no. PVC insulated and PVC sheathed armoured copper power cable, 1.1 KV grade of the following sizes.3C X 2.5SQMM CU CABLE

Supply laying clamping and termination of 1 no. PVC insulated and PVC sheathed 3 core flexible copper power cable, 1.1 KV grade of the following sizes3c 2.5sqmm wire

Supplying and making end termination with nylon UG gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3 X 2.5 sq. mm

7.5.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

7.7.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

14.16.1 : Supplying and laying of following size DWC HOPE pipe lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal)

7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)

4.6.1 : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness. Details of cost for 30 metres

5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

5.9 : Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required

Supply installation testing and commissioning of Facade lighting Architectural LED linear grazing light with housing material of Die-cast aluminium with dark grey anodized finish, system wattage should be less than or equal to 50W (+/-2w) at full load and 3000K CCT. Fixture shall be supplied with A2 Lens of Elliptical angle 25° x 40°. Fixture dimension shall be not larger than 1000 x 45 x 55 mm with bracket and weight not more than 3.5kgs. Fixture shall have minimum 24 nos of LED for proper light spread. Lifetime should be at least 50,000 burning hours at L50 at 35 degree centigrade with total fitting IP66 & IK06 protection. Make : Philips BCP383 M 24LED 30K 220V A2 L100 IN or equivalent in approved make

Supply of IP68 Protected 3 pin T - Type Cable connector suitable for power cable loop-in loop-out as approved by engineer in charge.

Supply of IP68 Protected 3 pin 2 way Cable connector suitable for power cable loop-in loop-out as approved by engineer in charge.

Supply and fixing of 3 module Weatherproof cabinets including all accesories with IP 65 - IK 09 rating Class II with phase , neutral and earth connector. (Legrand Plexo3 or equivalent)

SHINU P S

Bidder Name

NAVAS K.V

SHINU P S