Repair_pump_Point-F

Amount

Withdrawal of 150KW Vertical Flanged Mounted Motor of Pump No. 4 along with its Motor Stool from its existing position with the help of existing lifting arrangement after disconnection of all electrical connections and taken out the damaged TBH for repairing of the same as per direction of the same.

Carrying the defective TBH unit from work site to Kolkata Work Shop by hired vehicles including loading and unloading on both the sides for necessary repairing of the same.

Dismantling the TBH unit and taken out the broken Ratchet cover bolts from its body and retapping the worn out threaded holes after remetalizing as per requirement.

Fitting fixing the TBH unit part by part by newly supplied bolts (M10 x 40 mm long - 6nos.), 4 nos. Ratchen pin Ratchet cover seal etc. and gasket as per requirment.

Carrying of newly repaired TBH unit from work shop to work site by hired vehicles including loading and unloading complete on both the ends.

Supply & delivery at site of following item :-

TBH Rachet Pin (as per existing sample)

TBH Oil (Servo Prime 68)

Re-installation of the motor along with motor stool on its existing position by fitting fixing the newly repaired TBH unit with the help of existing lifting arrangement including reconnection of all electrical connections of motor as per direction of EIC.

Supply of following spares at site for PDB Cum MCC panel :-

Temperature Controller 3 digit single display, RTD & Thermocouple I/P , 1 Relay (10A SPDT ) or SSR O/P (Make- GIC, PR 69)

32 Amp. DP MCB Breaking capacity- 10kA with C characteristics [Make : Siemens / other equivalent approved]

32 Amp. FP MCB Breaking capacity- 10kA with C characteristics [Make : Siemens / other equivalent approved]

GIC 67DDT0 Programmable Electronic Timer Switch [Make : GIC 67DDT0 / approved make]

Push Button Switch with one NC & one NO contact.

Repairing of the existing panel by fitting of the above supplied materials (as in item no. 8.00) and sevicing spares in existing position making internal wiring and connection by supplying all fixing materials such as screws, nut-bolts, washers, cable tie, pvc tape, PVC duct with cover etc. and testing the same as per & up to the entire satisfaction of EIC.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.

For structural works in Roof Trusses etc. using joists, channels and angles of specified section weighing less than 22.5 kg / m

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work) (GCI sheet to be supplied by contractor)

In Roof with 0.80 mm thick sheet.

In Wall with 0.80 mm thick sheet.

Making necessary bricks wall and other civil works to complete of MS structural of Shed all complete as per direction of EIC.

Painting of above structural of Shed and LPBS with 2 coats of Synthetic Enamel paint over 1 coat of Red Oxide primer all complete as per direction of EIC.

GST @18% of Total Value in Amount

CESS @1% of Total Value in Amount

DAS ENTERPRISE (BID ID -6233492)

EASTERN INDIA SALES AND SERVICE (BID ID -6234250)