07 /EE/PMD/PHED OF 2024-2025/SL27

Amount

Supply and delivery of 63 Amps Kit-kat rewireable proceliain fuses set (Base & Bridge, 3 nos. in a set)(Make: Approved Vendor list of PHED.).

Supply, delivery of 63 Amps re-wireable porcelain fuse unit type TPN Main Switch with steel sheet enclosure with iron frame. (Make: Approved Vendor list of PHED.)

Supply and delivery of 16 sqmm, 4C Al. Ar 1.1 KV grade XLPE insulated cable.(Make: Approved Vendor list of PHED.)

63 Amp 4 way copper BusBar Chamber Box by 16 SWG Sheet steel enclouser including porcelin chair etc. with painting complete as per direction of EIC.(Make: Approved Vendor list of PHED.)

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. 4 Way

Supply, delivery and fitting fixing of 40 Amp. 30 mA DP RCCB with IS 12640-1 & IEC 61008-1) 240 V, 50 Hz with 10 kA short circuit withstand capacity on exsisting SS enclosure.

Distribution wiring in 11 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl necy. fittings as required . ( a ) 2 x 36/0.3 (4 sqmm)+ 1 x22/0.3 (2.5 sqmm) ECC

Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. a) 12 Module

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. a) Average run 5 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 6A 3 pin Modular type plug socket & switch (Brand approved by EIC) on 4 Module GI switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works. a) On board plug point .

Supply and fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener of Tube light luminaire - lumen - 2200 lm , Wattage - 22W, 6500K . Make : PHED Approved make .

Supply delivery & fitting fixing of 230 volt sweep AC ceiling fan with double ball bearing complete with all accessory such as blade canopy fork, down rod etc. 1200 mm dia blade.

Supply & Delivery at site 7 mtr. Conical/ Cylindrical GRP street light pole made by CNC filament machine using Thermoset resin having minimum 65% glass containt in one piece with straight non decorative GRP single arm of 1000 mm and internal junction box (6A SP MCB & 4 way connector). Top 85 ±2mm ID and bottom 176 ±2mm ID.

Supply & Delivery at site 7 mtr. Conical/ Cylindrical GRP street light pole made by CNC filament machine using Thermoset resin having minimum 65% glass containt in one piece with straight non decorative GRP double arm of 1000 mm and internal junction box (6A SP MCB & 4 way connector). Top 85 ±2mm ID and bottom 176 ±2mm ID.

Construction of RCC foundation volume not less than 0.4 cum in portion 4:2:1 and Ø10 and Ø8 TOR including provision of cable entry in Pole junction box and neatly cemented finish (3mm thick) above ground level.

Erection of 7 mtr pole on RCC foundation.

Supply and delivery at site of 1.1 KV grade 2 core 6 sq.mm XLPE insulated Al. Ar. Cable Conforming to IS:7098(Part-I) 1988. Make-PHED Approved make

Laying of one No. cable of 1.1 KV grade 2 core 6 sq.mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Laying of cable of 1.1 KV grade 2 core 6 sq.mm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting.

Supply & Storage of 60 watt LED fixtures with IP66 protection, PDC housing with finless design and polycarbonate cover(IK08). Pole dia. 48-60 mm. Make-PHED Approved make

Supply and fitting fixing of Street Light Panel (Conforms to IS/IEC 60947-4-1 ) with following specification: Maximum load : 6 kW, Provided with Protection Degree IP 54, FRLS (Fire retardant low smoke) Internal wiring, In-built Short-Circuit Protection, Class H Insulation, Digital 24 hour timer, Contactor Rating (A)-32 A TP, MCB Rating-40 A TPN including fixing on MS angle frame with S & F all necy with complete the power connection and earthing connection.

Supply & Storage of FRLSH PVC insulated 1.5 sqmm industrial grade copper conductor unsheathed flexible cables 1.1 KV confirming to IS 694.

Supply & Fixing including 40 mm dia GI Pipe with die cast aluminium housing of gate light 1x30watt LED outdoor luminaire ) Milk White decorative post top for 360° indirect light IP 65 protection Resistant to impact and corrosion as per direction of EIC.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture proof entry 1.1 KV Gr. 2 core 6 sq.mm XLPE Armored Al. Cable.

Finishing the end of the same by crimping method incl. supplying and fixing solderless socket (Dowels make) tapes, anticorrosive paste & jointing materials. 2 core 6 sqmm cable.

Earthing with 1 no. of G.I. earth spike (20 mm dia x 1.5 mtr. Long) driven into the ground upto 2 mtr. Drawing earth one with separate 6 SWG G.I. Wires providing 15 mm dia G.I. pipe protection from earth spike feeder box/ junction box/ poles and fixing to the same by suitable nuts & bolts all commette as per direction of EIC.

Fixing of Street light fittings with suitable tie clamps & MS Plate for mounting on pole / tower and connecting necessary wires including hiring charges of ladder and other incidential charges.

Supply delivery and fitting fixing of 1H.P MK1 DOL Starters Suitable for Pump/Motor 3Ø, Relay Range (A)-(1.5-2.5) (PHED Approved make)

Piping and structural work for double tank system : Supply delivery at site 500 litre capacity, P.V.C. water storage tank of approved make with closed top with lid (Black) - Multilayer

Supply & delivery at site 15 mm dia PVC flexible pipe

Supply of Chlorinated Polyvinyl Chloride (CPVC ) pipe fittings conforming to IS-15778: 2007 Tank connecting nipple a)32 mm dia (for drain pipe)

b)25 mm dia (for water inlet to tank)

c) 20 mm dia (for pump suction line)

Supplying, fitting and fixing of 32 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 25 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying, fitting and fixing of 15 mm dia gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only).

Supplying,fitting and fixing 25 mm dia check valve (horizontal) G.M. tested to 21 kg per sq. cm. 25 mm.

Supplying,fitting and fixing GM NRV (15 mm)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778:2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. (a) For Exposed Work (i) CPVC Pipes Class-I,SDR-11 a) 25 mm dia (inlet from delivery line to tank)

b) 15 mm dia (inlet from delivery line to tank)

c) 32 mm dia (Drain line)

Supplying, fitting and fixing cast iron heavy type spiral staircase of approved design with 50 mm.dia. Stem and C.I. Steps 150 mm as per design 900 mm. high C.I, railing including necessary M.S. tie of suitable section embedded to wall with cement concrete (1:2:4) including cost of intermediate C.I. platform secured with necessary tie to stem and wall with cement concrete (1:2:4) including fixing the stem in ground with cement concrete (1:3:6) complete in all respect with all labour and materials. With 1200 mm.dia. well

Supply fitting fixing of 25 mm dia PVC Ball float valve. Make-PHED Approved Make

Supply & delivery of moulded chair as per direction of EIC.

Supply & delivery of moulded Table as per direction of EIC.

Add GST @ 18%

Add CESS @ 1%

RABINDRA NATH KHAN (BID ID -5604081)

COMBINE ENTERPRISES (BID ID -5604395)