Annual Plan-2024-25 Nilambur BP Proj.No 215/25-IMPROVEMENT OF NREGS OFFICE FACILITIES-General Civil Work

Amount

AEE Office Renovation

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

OD228256/2024-2025:Demolishing laterite work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.13.1:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area 3 sq. metes and below

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

OD228492/2024-2025:( od Modi. 50.9.11.2)Providing and fixing Medium Density Fiber board (MDF) 18 mm thick laminatted on both side For office table works including Necessarry Fixing arrangments with Screws , clamps , nailas, glue etc com[plete as per the direction of site Engineer-in-charge.

OD228491/2024-2025:Providing and fixing PVC edge Banding Tapes 18mm wide for Table edges including all fixing arrangements with glue etc complete

OD228108/2024-2025:Providing and fixing auto hinges of approved make

OD228104/2024-2025:providing and fixing Multi Lock for shelf with necessary screws etc. complete as directions of Engineer - in-charge.

OD228493/2024-2025:providing and fixing Telescopic drawer channels (approved make) 300mm long with necessary screws etc. complete as directions of Engineer - in-charge.

9.92.1:Providing and fixing chromium plated brass handles with necessary screws etc. complete:125 mm

OD263421/2024-2025:Providing and fixing glazing With float glass panes of 12 mm thickness for Tables including all fixing arrangments etc complete

OD263420/2024-2025:Etching work for Glasses including all cost etc complete

OD263910/2024-2025:Edge Polishing for 12mm Glass panes including all cost etc complete

12.45.3:Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

OD263527/2024-2025:Providing and fixing 3 mm thick ACP sheet in panelling fixed in aluminum partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Aluminium composit pannel sheet

OD263593/2024-2025:( Modi. 21.2.2)Providing and fixing 2 mm thick PVC sheet for partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge

OD228103/2024-2025:( od Modi. 50.9.11.2) Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick, to wall with screws etc. complete and apply Textured Mica with wood grains including necessary fixing arrangments and screws etc complete

OD263616/2024-2025:( od Modi. 50.9.11.2) Providing and fixing Thomson Multi wood board or equivalent make paneling 18 mm thick for reepering to wall with screws etc. complete

OD228105/2024-2025:Suplying and Fixing Zebra Blinds Polyester and Polyester Blend Curtain for Windows (Brown) Including all charges etc complete

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

OD263670/2024-2025:(od from Spec 9.3.1)Providing wood work in frames of false ceiling, partitions, etc. sawn and fixed in position:Sal wood

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

OD263914/2024-2025:(Modified 13.80) Providing and applying Acrylic Deluxe wall putty of average thickness 2 mm, of approved brand and manufacturer, over the gypsum ceiling surface to prepare the surface even and smooth complete.

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

MILITARIZE CONSTRUCTION (BID ID -2044414)

Bidder Name

MOHAMMEDALI PK

MILITARIZE CONSTRUCTION