Supply, Installation, Testing and Commissioning of Fire Safety System at KSRTC Building, Muvattupuzha, Ernakulam

Amount

Fire Extinguisher

Supply & installation of CO2 Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

Supply & installation of CO2 type fire extinguisher of 4.5 kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent

Supply and Fixing of Fire Extinguisher dry chemical powder (ABC) Stored pressure type 4.5 kg capacity as per IS:15683 with ISI mark and with initial charger and installation brackets.

Fire Alarm Cable

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Fire Alarm System

Supplying, installation, testing & commissioning addressable fire alarm sounder+strobe with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required

Supply, installation, testing & commissioning of UL/LPCB(EN) listed/FM approved microprocessor based intelligent addressable single loop fire alarm control panel, central processing unit, capable of supporting not less than 125 devices (including detectors) and minimum 99 detectors per loop and loop length up to 1.5 km, LCD display with touch screen or other keypad and minimum 200 events history log in the non-volatile memory 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have the provision for networking in peer-to-peer basis with other Addressable Fire Alarm Panels. The Panel shall be able to give pin point location of all Fire/Fault conditions of addressable units via the address codes for each unit. The Panel shall also be able to automatically switch off all Control Switches whenever any Alarm is triggered. The panel shall be complete with all accessories as per the technical specifications. The panel shall have following features : a) Programming software for the system. b) Automatic system test activates. c) Detector sensitivity adjustments d) Alpha/numerical display. e) Provision to connect to PCs and external printers.

Supply and fixing of addressable Optical/Smoke detector with imported base on ceiling or roof as required by the site engineer in charge.

Supply, Installation of Sealed Lead Acid Battery 12 V DC x 24 Ah battery

Supply and Installation of Manual Call Point break glass type red colour powder coated MS/ABS box fix on existing wall /frame,24/12 Volt DC operated push OFF/ON switching mechanism with inner, outer frame, operation label and necessary attachments.

Isolator Module

Supply, installation, testing and commissioning of fault isolator module to protect one area or a number of devices with complete set to be installed under/above false ceiling, roof, concealed space, wall, etc. interconnecting to loop cable complete as required as per technical specification. The product shall be UL/LPCB listed/FM Approved.

Fire Hydrant System

Fire brigade Inlet connection fabricated from 100 mm dia MS Class C pipe comprising of two 63 mm dia gun metal male threaded non return valve. 4 way inlet

Supply and Fixing of Hose Box (cabinet) to accommodate one piece of 63 mm dia fire hose along with one pair of 63 mm dia male & female couplings and one branch pie. The cabinet is made of MS/Fibre sheet with glass fronted hinged doors and lock.

Supply and Fixing of Branch Pipe- S.S 63 mm dia short size branch pipe with 20 mm dia bore nozzle , as per IS:903 with -ISI Marked

Supply and Fixing of Hose reel drum made of Miled Steel, Hose Reel Drum - as per IS:884 with 30 mtr length rubber hose of working pressure 7 kg/cm2 and shutt off nozzle rang of jet flow 24 ltr/min, range of jet throw 6 mtrs with ISI mark.

Suppy and fixing of Fire Fighting Hose , Fire Hose - 63 mm ( 2 1/2") dia , 15 mtrs length bearing IS;636 type A with ISI Marked duly bounded with S.S couplings, 63 mm size, pair of male & female parts, instantaneous type , heavy duty bearing IS:903 with ISI mark.

Supply and Installation of Hydrant Valve- Single Headed, S.S -as per IS: 5290 , ISI Marked oblique pattern Hydrant Landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with pvc blank cap & chain .

Supply and Installation of following type strainer valve for safe pump operation. 80mm dia

Supply and Installation of following type strainer valve for safe pump operation. 150mm dia

Supply and Installation of alarm control valve consisting of 1 number alarm valve, 1 number main stop valve ,1 number water meter with alarm gong, pressure guage, drain valve and drain piping etc complete 150mm dia

Supply and Fixing of Air cushion vessel made of MS sheet 200 mm dia in 1 mtr height, with automatic air release cock, 25 mm drain valve and shut off with all necessary attachments.

Supply and fixing of Air release valve gun metal body of 25 mm dia

Supply and fixing of pressure guage, 4 " dial, 0 - 200 psi range 3/8" BSP weather proof with stainless steel internals, siphon tube including fittings etc.

Supply and fixing of pressure switch having 1/4" BSP (F) connection IP:32 enclosure protection, pressure range 0 to 200 psi with necessary contact

Valve

Supply and fixing of Ball Valve cast iron body as per IS 5312 with ISI mark.

Supply and fixing of Non Return Valve single plate wafer type swinch check valve, short pattern type with integral hinge pin disc, nitrile rubber O - ring seat and face sealing as per IS: 5312 with ISI mark. 150mm

Supply and fixing of butterfly valve wafer type Stainless steel/SG iron disc , lever operated as per IS:13095 in PN 1, teflon or nylon bushing, nitrile O rings in standard mounting flanges with hand lever type with ISI mark. 100 mm

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint including structural supports as required. 100mm dia

Supply and fixing of M S Pipe Class ' C' with ISI Mark complete with all necessary fittings such as nuts & bolts, bends, flanges, tees etc. Piping shall have one coat of noncorrosive primer coat over which two coats of signal red paint including structural supports as required. 150mm dia

Cabling and Termination

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 x 25 sqmm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 x 70 sqmm

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 4 core 25 sq mm with factory made clamp

Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required. 3.5 core 70 sq mm with factory made clamp

Fire Pump

Supplying, Installation, Testing and Commissioning of mono block type Terrace pump suitable for automatic operation and consisting of pump of cast iron body & CI impeller with stainless steel shaft, mechanical seal and flow of minimum 1320 LPM at 35 mtr head confirming to IS 1520 , 12.5 to 20 hp Squirrel cage induction motor 415 volts, 3 phase 50 Hz. AC for enclosure, horizontal foot mounted type M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc.as required. Suitable cement concrete foundation duly plastered with anti vibration pads.

Starter Panel

Sign Boards

Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for each floor 12" x 4" in appropriate places (FIRE EXIT, FIRE STATION , FLOOR LEVELS,, EXIT ETC)

Supply & erection of Glow Sign Boardmade of 3mm thick PVC foam board for Assembly Point sign board 16" x 16"

Miscellaneous

Preparation of all drawings (initial+final), submit to Fire Department and other agencies if any for getting approval and sanction and obtaining No Objection Certificate (NOC). (All statutory fees shall be borne by Client - Actual amount shall be paid after submission of bill)

Allies Fire Systems Pvt Ltd

MM BABU ENGINEERING CONTRACTOR