RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Note: 1. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years
Requiredending on 31st March of the previous financial year
Requiredshould be as indicated in the bid document. Documentary evidence in the form of certified Audited Balance Sheets of relevant periods or a certificate from the Chartered Accountant/Cost Accountant indicating the turnover details for the relevant period shall be uploaded with the bid. In case the date of constitution/incorporation of the OEM is less than 3 year old
Requiredthe average turnover in respect of the completed financial years after the date of constitution shall be taken into account for this criteria. Fire Resisting Filing Cabinets ( 1 pieces ) ( Under PAC ) Make godrej Model godrej2hour2drawerfireresistingfilingcabinet Technical Specifications * As per GeM Category Specification 1/3 Specification Specification Name Values Bid Requirement (Allowed Values) GENERIC Conformity to Indian Standard IS:14561 Latest IS:14561 Latest Types Standard Fire Resisting Filing Cabinet Standard Fire Resisting Filing Cabinet
RequiredLateral Fire Resisting Filing Cabinet Fire Resisting Ratings FR-120 FR-60
RequiredFR-120
RequiredFR-180
RequiredFR-240
RequiredLFR-60
RequiredLFR-120
RequiredLFR-180
RequiredLFR-240 No of Drawers 2 1
Required2
Required3
Required4 Colour Grey * Paint Polyurethane Paint * MATERIAL Drawer Suspension Ball Bearing Suspension * Locks Dual Control Key lock of min. 6 levers Dual Control Key lock of min. 6 levers
Required3 Wheel combination lock
RequiredElectronic Combination Lock
RequiredDual Control Key lock of min. 6 levers+ 3 Wheel combination lock
RequiredDual Control Key lock of min. 6 levers+Electronic Combination Lock Handles Material ABS * DIMENSION MS sheet nominal thickness of outer body and inner box (in mm) 1.2 0.7
Required0.8
Required0.9
Required1
Required1.1
Required1.2 Or higher MS sheet nominal thickness of Drawer Front (in mm) 1 0.6
Required0.7
Required0.8
Required0.9
Required1
Required1.1 Or higher MS sheet nominal thickness of Filing Drawer (in mm) 1 0.6
Required0.7
Required0.8
Required0.9
Required1 Or higher CERTIFICATION ISI Marked Yes * CM/L No. 3874581 * Test reports to be furnished to buyer on demand Yes * * Specifications highlighted in bold are the Golden Parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.