Lifting and lowering of Submersible Motor Pump Set in different MI Installation under Jalangi (A-I) Sub Division within Berhampore-I(A-I) Division, Berhampore, Murshidabad under Non-Plan.

Withdrawal of electro motor submersible pumping set of following capacities from within the tubewell housing pipe of the following length by using all necessary requisites tools and plants and carefully as per direction of Engineer-in-Charge and stacking the same properly at site within the tubewell premises complete.

Length of pump assembly of any length exceeding 18 meter length.

Installation of submersible electro motor pumping set of following capacities by using necessary requisite, tools and plants by lowering the same within the tubewell housing pipe upto the following depth as per direction by fitting, fixing column pipes and other accessories, fixtures with necessary nuts, bolts and washers and suspending the entire assembly of pump set vertically by fixing the same supported by M.S. clamps over the top of housing pipe, binding the motor cable with each column pipes and drawing cable upto pump controller/starter point including opening out of the top cap of housing pipe of the tube well and testing of motor both in loading as well as in unloaded condition before and after installation of the same. (The rate is inclusive of hiring charges of tools & plants.)

Length of pump assembly of any length exceeding 18 metre length

Jointing water proof cable with the leads of the motor including soldering with requisite water proof insulation and proper jointing compound /Valcanized rubber tape so that proper water proof insulation is assured.

Transportation of submersible Electro Motor Pumping set along with all other accessories and equipments including bend, sluice valve column pipes etc.from sub divisional store to worksite including loading at the lifting point and unloading at the delivery paint including necessary head load up to 100 meter at both ends. A) Carriage by road. Distance up to 50 km.

(i) 100/150/200 cubic meter per hour (m3/hr.) capacity lector motor pumping set with column pipes and accessories etc. (Full set)

Supply fitting & Fixing of 150mm dia Rubber Insertion 5 mm thick with proper einforcement 2 ply conforming top I.S. 638/79 with latest amendments duly ISI Marked subitable for M.S. Flange as per I.s. 6392/71 with standard drilled holes (Table 11,17)

Supply fitting, fixing nut & bolt

Add GST @ 18% on item no. 1 to 6

Add CESS @ 1% on item no. 1 to 7

Please Enable Macros to View BoQ information