PROVN OF TOILET BLOCK, OFFICERS TOILET, UTILITY AREA, WEATHER SHELTER AND OTHER SANCTIONED WORKS UNDER AGE B/R LEKHAWAD UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavating over areas, n exc 1.5 m deep and getting out in soft /loose soil complete all as specified and directed

Excavating over areas,exc 1.5 m but n.exc 3.0 m deep and getting out in soft /loose soil complete all as specified and directed

Excavating over areas, exc 3.0 but n exc 4.5 m deep and getting out in soft /loose soil complete all as specified and directed

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation etc. n exc 10 sqm area on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

M&L for Plain Cement concrete1:4:8 (type D-2) ( using 40 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for RCC M-30 as in Foundations, including rafts, footings, foundation beams; slant beams; bases for columns, etc complete all as specified and directed

M&L for RCC M-30 AS IN Walls, Retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed

Use & waste of for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter on flat surfaces complete all as specified and directed

Use & waste of Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified

M&L for Mild steel deformed wisted bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M&L for Mild steel deformed wisted bars 5mm dia and upto 10 mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for in stirrups, spacers and binders complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above from the starting pointcomplete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

S&F in 75 mm bore PVC (SWR) pipes as in wheep holes complete all as specified and directed.

M&L for using Graded coarse aggregate 20 mm as in invert filter complete all as specified and directed

M&L for using Graded coarse aggregate 63- 40 mm as in invert filter complete all as specified and directed

M&L for sand filling as in invert filter , and back filling etc. including watering and consolidation complete all as specified

M&L for Brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of cement based paint over a coat of primer including preparation of new plastered surfaces of wall complete all as specified and directed.

M&L for 200-250 mm thick stone boulder pitching with dressed edge stones, laid and grouted with cement and sand mortar 1:6 on area complete all as specified and directed.

M&L for Cement concrete type B-1 1:2:4 ( using 20 mm graded crushed stone aggregate) as in coping over walls /drains etc complete all as specified

M&L for 50 mm thick Cement concrete type B-1 1:2:4 ( using 20 mm graded crushed stone aggregate) as in flooring / sub base etc complete all as specified and directed

S&F for steel work in tubular trusses, posts, purlins and rafters including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 - 1998 grade St-240 complete all as specified and directed.

Supply , installation and finishing Sundek Air-Cush wooden flooring system with 21 mm thick (50 to 100 mm width) kiln seasoned imported Maple wood (sycamore) surface board, in random length in tongue and groove shape (The edges of the boards will have a finger lock groove and the bottom side with air pass groove) over and including under frame made of commercial quality Fir/Spruce/Pine wood runners of 90/70 mm x 45 mm treated with anit-termite solution and fixed on the bottom side with 18 mm thick air-cushioning pads by nails through the two wings at 350 mm c/c. Finally the floor will be machine sanded in uniform level and finished with imported non-skid DIN certified Polyurethane lacquer complete all as specified and directed.

Framed work such as grills, gratings,ms plates etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for 25 mm Thick PCC 1:2:4 type B0 under floor tiles finished even and fair without using extra cement complete all as specified and directed. (using 12.5mm graded agregate) complete all as specified and directed

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge.

Rounding to edges of stone slabs one edges such as in steps, cooking platform, shelves and other similar situations complete all as specified and directed.

Supply and fixing of 75 mm thick Birla Aerocon Prefabricated Fibre Reinforced Sandwich Panels, made of two Fibre Reinforced Cement facing boards on either sides of a lightweight concrete core. These boards shall be of thickness of upto 5 mm and shall conforms to IS 14862:2000 (Type A). The core shall be made from a mix of cement and silacaceous & micaceous material. The Aerocon Prefabricated fibre reinforced sandwich panel shall have size 2400/2700/3000 mm in height and 600 mm in width. These panels shall have Tongue & Groove joint system for partitions. These panels shall have fire rating of 2 Hrs. or more, Thermal conductivity of 0.17 W/m.k or less, sound insulation of 40 db. or more and can able to take Axial load of 90 KN/m or more (tested as per ASTM E 72). Jointing of these Prefabricated fibre reinforced sandwich panels shall be done with a polymer modified Cementitious jointing compound in tongue & grove and surface joint shall be treated with Polymer modified cementitious jointing compound and fibre tape. The Aerocon Prefabricated fibre reinforced sandwich panels shall be laid on GI coated (120 GSM both side inclusive) floor & ceiling channel of 1 mm thick and sizes of these channels shall be 14x75x25 mm for floor channel and 38x75x38 mm for ceiling channel. The rates shall be inclusive of all component, fixing, wastage, all required accessories and hardware as a complete item of work as per the guidlines of HIL Limited and instructions of Engineer-in-charge.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified

M&L 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately complete all as specified

Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed

M&L for Preperation of plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 3mm thick birla wall care putty on wall complete all as specified and directed

S & F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S & F 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed,complete all as specified and directed

S & F 100mm Brass handles, cast type, polished bright complete all as specified and directed

S & F 2 lever Brass Mortice lock, vertical type, size 100 mm complete all as specified and directed.

S & F S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using fly ash bricks complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

S & F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed by engineer in charge

M & L for preperation of plastered surfaces of walls and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm over and including 3mm thick birla wall care putty on walls complete all as specified and directed

S & F Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F CP Fancy type Bib taps 15mm bore, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F Door closer hydraulically regulated (Aluminium extruded section body), designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F for GI tubing medium grade with all fitting 15 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F for GI tubing medium grade with all fitting 25 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F for Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed 15 mm bore complete all as specified and directed.

S&F for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F for stainless steel grating doom 100 mm dia complete all as specified and directed

S&F for stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed complete all as specified and directed

S&F for angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore complete all as specified and directed

S&F for Toilet Roll Holder with flap, Make : Jaquar (Cat Pat No AQN-7753) or equivalent as approved by GE, complete all as specified and as directed by Engr-in-Charge

S&F for 5 mm thick glass looking mirror with chamfered edges of minimum size 600mm x 500mm fixed with minimum 4 Nos stud at each corner of mirror complete all as specified and directed

S&F for Soap Dish Polycarbide, Make : Jaquar (Cat Pat No AQN-7733) or equivalent as approved by GE. complete all as specified and as directed by Engr-in-Charge

Supply & fix Hand Shower (health faucet) 15 mm bore with 1 meter long easy flex tube in chrome finish and wall hok with NRV (Back Flow Preventer) as approved by the GE. Make- Jaquar (Cat Pat No- ALD-CHR-579) or equivalent. complete all as specified and as directed by Engr-in-Charge

S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed

S&F for viterous China table top wash hand basin white size 160mm x 495mm x 365mm as per Jaquar Cat Part SLS-WHT-0558 complete all as specified and directed

S&F for 32mm dia PVC (flexible) waste pipe, 800mm long for WHB complete all as specified and directed

S&F for EWC bowl for extended wall hung-WC with soft closing seat cover, size 635 x 365 x 770 including cistern with cistern fittings Make - Jaquar (Cat pat No - CNS-WHT-353S) complete all as specified and directed by GE.complete all as specified and as directed by Engr-in-Charge

S&F for 15mm brass CP Central Hole Basin Mixer quarter turn with Popup waste system with 450 mm long braided hoses etc. Make : Jaquar (Cat pat No CQT-CHR-23169B or equivalent as approved by the GE as per the list of makes.

S&F for Tubular towel rail CP Brass, 60cm long between flanges complete all as specified and as directed by Engr-in-Charge

S&F for towel ring CP fiexd with Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms)

S&F for 15mm brass CP Wall Mixer quarter Turn with provision for overhead shower with 115mm long bend pipe on upper side, connecting legs & wall flanges , Make : Jaquar (Cat pat No CQT-CHR-23273UPR or equivalent as approved by the GE as per the list of makes.

S&F for Brass chromium plated swivel shower rose 450mm size including shower arm 450mm Make : Jaquar (Cat Pat No OHS-1989 and SHA-479L600) or equivalent as approved by GE, complete all as specified and as directed by Engr-in-Charge

S&F for in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified

S&F for ball valve high pressure of PTMT with epoxy coated aluminium rod &high density plastic bal screwed for iron pipe 20 mm dia and fixed (Minimum Weight 210 gms) complete all as specified and directed

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75 mm bore complete all as specified and directed

M & L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified

M & L for PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls110 mm bore complete all as specified

M & L for PVC (SWR) bends any radius 75 mm bore complete all as specified and directed

M & L for PVC (SWR) bends any radius 110 mm bore complete all as specified and directed

M & L for Salt-glazed stoneware gully traps, square or round mouthed, type `P' size 150mmx150 mm complete all as specified

M & L for PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 75 mm complete all as specified

M & L for PVC (SWR), junction single, (Single T) equal or unequal with oval access door dia of pipe 110 mm complete all as specified and directed

S&F for Rotatinal moulded polyethylene water storage tanks of capacity 500 Ltrs (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified

M & L for PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified

M&L Soakage wells of size 3.00 M X 4.5 m excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0M X 4.5M

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested

M & L for RCC pipes 150 mm class NP-2 laid and jointed complete with collars complete all as specified

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out hard/dense soil

M&L for hardcore of broken stone or boulders , gauge not 63 mm deposited spread and levelled in layers n exc 15 cm thick watered and rolled /rammed to a true surface all as directed.

M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws compelet as specified

M&L for Anodised aluminium snap grid frame work for false ceiling all as specified

S & F for 10 mm thick PVC insulation panels with EPS stuck to one mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing complete all as specified.

S&F for steel ventilators with top hung shutter including hinges, steel peg stay, complete

S&F for Figured glsass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane with 3 mm thickness complete all as specified.

S&F for solid PVC door frame of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube as per specification and drawing complete all as specified.

m & L for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails, MS frame shall be covered with heat moulded lain colour PVC Ç'channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame wedded/sealed to the stiles, & rails with suitable PVC sheet beading and jointed together with solvent cement, suppling and fixing in the frame at site as per secification & drawing.

S&F for Butt hinges, medium weight , stainless steel, and fixed 100 mm complete all as specified and directed

S&F 150 mm long stainless steel barrel tower bolt of extruded section complete all as specified and directed

S&F stainless steel handles cast type 150 mm size complete all as specified and directed

S&F GI tubing medium grade with all fitting 20 mm bore fixed to wall or concealed or fitted to ceiling or laid under floor complete all as specified and directed.

S&F PVC valveless,syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including brakects flushing, brakects flushing pipe complete all as specified & directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Vitreous China wash basin, coloured oval shape , size 550x400mm including brackets, coupling and waste pipe fitted in and including granite counter slab of size 600mmx900mm, compete all specified and directed by Engr-in-Charge

S&F Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15 mm complete all as specified and directed

S&F stainless steel grating doom 100 mm complete all as specified and directed

S&F Vitreous China coloured EWC wall mounted with flushing cistern incl PVC coloured sheet cover, health faucket/pressure jet etc complete all specified by Engr-in-Charge (Make-MARC CAT PART NO MAC 3020 or equivalent in CERA, JAQUAR)

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed

S&F stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15 mm bore or union and fixed

S&F angle stop valve cast copper alloy chromium plated screwed for iron pipe 15 mm bore

S&F 100 mm bore Cast iron soil, waste and vent pipe in any length with or without ears, with cement Joints, laid in trenches or but fixed in walls

M & L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over a coat of one mm thick birla wall care putty on walls complete all as specified and directed

M&L for preparing new steel surfaces of any description exc 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome. complete all as specified and directed

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring, 100 mm thickness complete all as specified and directed

M&L for 50 mm thick plain cement concrete type C-1 1:3:6 (Using 20 mm graded stone aggergates ) as in plinth protections 100 mm thick finished even and fair with joints 10 mm wide and in full depth at corners and @ 3 m c/c filled with mastic mortar complete all as specified and directed

M&L 15mm thick cement plaster on fair faces of brick work or concrete surfaces in CM 1:4 finished the surface fair and even without using extra cement complete all as specified and directed.

M & L Double charge Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed by engineer in charge

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections), including distance piece, cleats etc fixing complete using Fe-410-W( Gde E-250) quality-A

S&F Plates (plain or chequered) , channels, square cut or notched ( ordinary and counter sunk) forming holes, without any attachment etc complete using Fe-410-W( Gde E-250) quality-A

Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed.

S & F 5.5 mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed

S & F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed

Excavation in post hole each n exc 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layer n exc 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surfaces in soft/loose soil complete all as specified and directed.

M & L for Cement concrete in foundation filling and mass concrete type B2,1:2:4,(40 mm graded aggregate) complete all as specified and directed.

M&L for providing 4mm thick designer shingle mat of any colour, design pattern at any height and slope comprising of mineral stabilized reinforced fibre glass high grade asphalt overlaid with high strength ceramic coated granuals on mineral stabilizer fire-retardant coating including sealing ridge/ valley liner cover laid with forced torch gun over 16mm thick cement asbestos plain sheet fixed with self tapping screws and joints sealed with matching colour silicon complete all as specified and directed

S&F for 605x605mm size anodised aluminium snap grid frame work for false ceiling including hangers of 3 mm dia wire complete all as specified and as directed

S&F for 8-10 mm thick PVC insulation panels with EPS stuck to 1mm Printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawin. Armstrong/Gyprock or equivalent as approved by GE as per the list of makes complete all as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D2- using 40mm graded stone aggregate as in sub base etc. finished even and rough to reciving top layers complete all as specified and directed

M & L for providing cement concrete rounded or chamfered on edges of paver blocks / chequered tiles or sides of path / hardstanding ,roof kerbing and mud stops etc. type B-1, 1:3:6 (20 mm graded crushed stone aggregate) complete all as specified and as directed

M&L 60 mm thickness, M-35 Grade Machine pressed precast conctete interlocking paver block with grey colour cement and pigment of any shape and size confirming to IS 15658-2006

M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1 :6 complete all as specified and directed

All as per item no 14 above but 10mm thick CM 1:4 on vertical surfaces/skirting complete all as specified and as directed by Engr-in-Charge

S&F Powdercoated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing,anodised aluminium snap beading,screws etc. complete all as specified and directed

S&F Powder coating Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows ventilators and partation with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F 5 mm thick Figured glass, pin head type and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified

S&F Roller blinds in windows/partition complete all as specified and directed

S&F 9 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

M&L for glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed

M&L for Medium density fibre board interior grade 18 mm thick solid construction type, fixed in CBs door shutters on timber frame work with screws /nails complete all as specified.

M&L for 0.9 mm thick Decorative laminate type-1, both sides of boards of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed

S&F butt hinges type B-12 or (overlay/ self / auto closing hinges ) for cupboard / shelves shutters of size 125 mm complete all as specified and directed

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and as per directions of Engineer- in-charge

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge

S&F Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified

S&F powder coated aluminium anodised three track sliding window shutter and frame including jointing clit for fixing frame/chowkhat of window as per JINDAL section code (frame 20831), shutter (20846) including glazing with 5mm thick tinted glass & Aluminium wire mesh necessary fittings, rubber packing, suitable handles, rollers for shutters etc complete all as specified and as directed.

S&F powder coated aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 6 mm thick complete all as specified and as directed.

S&F Extruded aluminium alloy handles, fabricated type, anodised 150 mm complete all as specified and as directed by Engr-in-Charge

S&F Aluminium, anodised, barrel tower bolts 200 mm long of extruded section and fixed complete all as specified and as directed by Engr-in-Charge

S&F Morticelock aluminium anodised vertical type 04 levers 100mm size with keys complete all as specified and as directed by Engr-in-Charge

S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed by Engr-in-Charge

S&F SS handle 100 mm long ,complete all as specified and as directed.

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete( Fe 410 -W (GdeE- 250)

M&L for Glossy finished pre polished coloured machine pressed precast concrete interlocking paver block any shpe and size confirming to IS 15658-2006 of 80 mm thickness , M-40 grade with grey cement and pigments complete all as specified

M&L for PCC 1:2:4 tyep B-1 ( using 20 mm graded stone aggregate) as in kerbs or mud stops , rounded or chamfered on edges complete all as specified.

M & L for rendering 10mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified

M&L for preparation of old painted wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of Synthetic enemal paint complete all as specified and directed

M&L for preparation of old steel surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coat of Synthetic enemal paint complete all as specified and directed

M&L for point wiring for modular accessories with modular metal flush box and cover plate with frame of suitable size complete with 1.5 Sqmm single core PVC insulated but unsheathed multistranded copper conductor HRFR cable 1100 volts grade drawn through and including concealed conduit with 1.5 sqmm, single core, PVC insulated but unsheathed multistranded copper conductor HRFLS cable 1100 volts grade as earth continuity wire terminated in new modular sunken boxes and modular metal flush box as required size at site ,complete all as directed for the following.

(a) One light point controlled by one switch.

(b) Alla sper but one 3 Pin socket out let 5 Amps on the same board.

(c) -ditto- but one 3 pin socket out let 5 Amps on the independent board.

All as per item No 181 above but 2.5 sq mm wire for 15 amps power socket point.

S&F for Modular metal flush box 1/2 module complete all as specified and as directed.

S&F for Modular metal flush box 3 module complete all as specified and as directed.

S&F for Modular metal flush box 4 module complete all as specified and as directed.

S&F for Modular metal flush box 6/8 module complete all as specified and as directed.

S & F for white cover plate with frame , 1 module complete all as specified and as directed.

S & F for white cover plate with frame , 2 module complete all as specified and as directed.

S & F for white cover plate with frame , 3 module complete all as specified and as directed.

S & F for white cover plate with frame , 4 module complete all as specified and as directed.

S & F for white cover plate with frame , 6 module complete all as specified and as directed.

Supply & Fix modular switch one way 6A,1 Module complete all as specified and as directed.

Supply & Fix modular switch one way 16A,1 Module complete all as specified and as directed.

Supply & Fix modular bell push 6A,1 Module complete all as specified and as directed.

Supply & Fix modular socket 6/10A-2/3 pin combined 2 Module complete all as specified and as directed.

Supply & Fix modular socket 16/15A-2/3 pin combined 2 Module complete all as specified and as directed.

S&F Supply only ceiling rose 3 Terminal/polycarbonate,isolated body complete all as specified and as directed.

Supply & Fix lamp holder, insulated body with back plate for battern fitting complete all as specified and as directed..

S&F Bell Multi Music type complete all as specified and as directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete withlouv ers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250 mm sweep MAKE ORIENT 250 mm ventilator ivory or equivalent in make CG / KHETAN / USHA

M&L for Sub main wiring complete with two run of 4 Sqmm single core, PVC insulated but unsheathed, multistranded copper conductor FRLS 1100 Volts grade cable drawn through in and including non metallic, rigid, PVC heavy duty surface conduit with wall thickness not less than 1.8mm complete with all accessories like bends, tees, junction boxes fixed on wall, ceiling including 4 Sqmm single core PVC insulated but unsheathed multistandard copper conductor FRLS 1100 Volts grade cable as earth continuity wire and connected to earth dolly . Note :- Two run of 4 Sqmm cable incl one run of earth wire and PVC conduit and its accessories shall be measured and paid as one length.

Supply and fixing outline suspension(Chandelier) light 5xLED integrated 36 watt of colour Bronze made up of Metal and Glass including connection to the elecetric network complete all as specified and directed of Make- Philips Model No-40936 or equivalent

S&F Glide LED wall Lantern (Jazz Pendant Single) 9 watt , Lamp Base-E-27, warm white made out of Al and glass including connection to the elecetric network complete all as specifed and directed of Make- Philips, Model No-38147 or equivalent

S&F LED Downlight (Aura Styledge) 5 watt round WW/CDL , made out of Al and glass including connection to the elecetric network complete all as specifed and directed of Make- Philips, Model No-59346 or equivalent

M&L for sheet metal powder enclosure powder coated versatile double door SPN distribution board for MCB provisions fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240/215Volt, 50Hz supply for 8 way, with provn of IP-43-IK09 , and as directed by Engr-In-Charge MAKE L&T / SCHNIEDER/ LEGRAND .

Supply and fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole, 6 to 32A complete with connection testing and commissioning MAKE L&T / SCHNIEDER/ LEGRAND.

S&F MCB SPN 230 volts 32 Amps 10 KA, 'C' Series MAKE L&T / SCHNIEDER/ LEGRAND.

Supply, install,and commissioning of Hi Wall Split Units indoor/outdoor complete with cordless remote controll unit with inbuilt air ionisor and Plazma filleter for better air quality minimum 3 star rating, invertor type of Make- Voltas/Bluestar/Carrier

Supply and fixing copper pipe 19.05 mm(3/4'') dia 0.8 mm thick for Split AC complete all as specified and directed

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed

Supply and laying in trenches, fixed in wall of pipe galvanized, “Medium class”, including fittings 40 mm (1.5”) dia complete all as specified and directed.

Supply and laying in trenches, fixed in wall of pipe galvanized, “Medium class”, including fittings 25 mm (1”) dia complete all as specified and directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 40 mm bore complete all as specified and directed

SNEH TRADERS

Shreeganesh Construction

DATTA SURYAKANT CHAUDHARI

Shree Builders

ALBA AC AND REF SERVICES

Haritwal traders

Ramdev and Sons

JIYA CONSTRUCTION