BID DOCUMENTS FOR PROPOSED PLASTARING ON OLD WALL AND THE WORK OF REMAINING WALL IN BHATT SMSHAN AT UMRETH NAGARPALIKA UNDER: SWARNIM JAYANTI MUKHYA MANTRI SHAHERI VIKAS YOJANA-UDP-88 (YEAR: 2023-24).

Item Qty. Description Total Unit Amount

1 165.50 Excavation for foundation upto 1.5 m depth including

Cmt. sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(A)

Loose or soft soil 122.94 Cmt.

2 30.50 Excavation for foundation for depth from 1.5 m to 3.0 m

Cmt. including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil 136.30 Cmt.

3 136.00 Filling available excavated earth (excluding rock) in

Cmt. trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

4 19.00 Providing and laying cement concrete (1:4:8) (1 Cement,

Cmt. Coarse sand, 8 Crushed stone agreegate 40 mm nominal)

and curing complete excluding cost of formwork in

foundation and plinth.

5 29.50 Providing and Laying controlled cement concrete M-200 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Column footings.

6 4.00 Providing and laying controlled cement concrete M-200 and

Cmt. curing complete including the cost of formwork But Excluding

the cost of reinforcement for reinforced concrete work in

Column upto Plinth Level having any cross section area. 7524.00 Cmt.

7 6.00 Providing and Laying controlled cement concrete M-200 and

Cmt. curing complete, including the cost of formwork but excluding

the cost of reinforcement for reinforced concrete work in

Columns having any cross section area upto floor two level.

SBD SECTION-7 BILL OF QUANTITIES-147

8 8.50 Providing and laying controlled cement concrete M-200 and

Cmt. curing complete including the cost of formwork but Excluding

the cost of reinforcement for reinforced concrete work in

Ground Beam having any cross section area.

9 3.50 Providing and laying controlled cement concrete M-200 and

Cmt. curing complete including the cost of formwork and excluding

the cost of reinforcement of reinforced concrete work in

Coping 5815.58 Cmt.

3760.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work

Kgs. including bending, binding and placing in position complete

upto floor two level

11 42.50 Brick work using common burnt building bricks having

Cmt. crushing strngth not less than 35 Kg./cm2 in super structure

for Ground Floor in C.M. (1:6) (1 Cement, 6 fine sand)

racking out joints curring etc. complete directed by Engineer-

12 1298.00 20 mm thick sand faced cement plaster on walls up to heinht

Smt 10 metres above ground laval cosisting of 12 mm thick

backing coat of C:M 1:3 (1-cement :3-sand) and 8mm thick

finishing coat of C:M 1:1 (1-cement :1-sand) etc. complete.

13 1298.00 Finishing wall with water proof exterior emulsion apex paint

Smt of on wall surfaces (two coats) to give an approved brand and

manufacture and of required slope evan shade after

throughly brushing the surface to remove all dirt and remains

of loose powered materials. etc completed.

14 7.83 Steel work, riveted in built up sections framed work including

Qtl. cutting, hoisting, fixing in position and applying a priming coat

of red lead paint. (A) In beams and joists, channels angles

Tees, flats, with connecting plates or angle cleats as in main

and cross beams. Hip and jack rafters, purlins conneted to

common rafters and the like.

15 1.30 16G Make Tata

Qtl. Double twisted barbed wire, gauge 16, barb spacing 4". four

horizontal lines and two diagonals of galvanised steel barbed

wire weighting 9.38 K.G. per 100 metre strained and fixed to

posts with G.I. staples, including fixing the posts in coping of

compound wall. 5820.34 Qtl.

SBD SECTION-7 BILL OF QUANTITIES-148

16 324.00 Providing and fixing M.S. grills of required pattern to wooden

Kgs. frames of windows etc. with M.S. flats at required spacings

and frame alround, square or round bars with round headed

bolts and nuts or by screws. (A) PLAIN GRILL.

17 11.00 Applying priming coat over new steel and other metel surface

Smt. after and including preparing the surface by throughly

cleaning, oil,grease, dirt and other foreign matter and scoured

with brushes fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead.

18 11.00 Painting three coats (excluding priming coat) on new steel

Smt. and other metal surface with enamel paint, brushing, interior

to give an even shade including cleaning the surface an even

shade including cleanicn the surface of all dirt, dust and other

foreign matter. 150.17 Smt.

Total Amount, Rs.

Total Amount, Rs.

Add :- 18% of GST, Rs.

Add :- 1% of Quality Controll, Rs.

Add :- 2% of Contingency Charges, Rs.

I / We am/are willing to carry out the work at _____________ % above / below (percent should be written in figure and

in words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

( In words ) __________________________________________ Percentage above / below the estimated rate.

Estimated Amount put to tender Rs.

Deduct _______ % below Rs. Rs.

Estimated Amount put to tender Rs.

Add _______ % above Rs. Rs.

Total Amount Rs.

Total Amount Rs.

*( Please strike out whichever is not applicable)

Note :1 All work shall be carried out as per Public Works Department Hand Book and other specifications

of Division or as directed.

Note :2 Rates quoted include clearance of site (prior commencement of work and its close) in all respects

and hold good for work under.

Note :3 I/ We have read the conditions mentioned in this tender and agree to abide by the same.

Seal & Signature of Contractor President Chief Officer

Umerth Nagarpalika Umerth Nagarpalika

SBD SECTION-7 BILL OF QUANTITIES-149