Ferkuva Chhotaudepur Bodeli Road (NH 56) and Bodeli Jambughoda Shivrajpur Champaner Bye Pass Halol Road (NH 756). (2) Bituminous items for patch works including labours, materials and machinery under NH Division, Vadodara.

Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 to 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom.) (NH SOR 23-24, It. No.-5.2 (i))

Providing and laying bituminous macadam with 100-120 TPH /Drum mix Plant 60 to 90 TPH capacity hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 3.4 per cent by weight of total mix, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction including cost of tack coat of emulsion bitumen at rate of 2.00 Kg./10 Sqmt. etc. complete as per MoRTH specification clause No. 504 complete in all respects. (a) Laying the mixed materials with paver finisher [As Per RA atteched] Using VG - 40 Grade Bitumen

Providing and laying bituminous macadam with 100-120 TPH /Drum mix Plant 60 to 90 TPH capacity hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 3.4 per cent by weight of total mix, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction including cost of tack coat of emulsion bitumen at rate of 2.00 Kg./10 Sqmt. etc. complete as per MoRTH specification clause No. 504 complete in all respects. (a) Laying the mixed materials with paver finisher [As Per RA atteched] Using VG - 30 Grade Bitumen

Close Graded Premix Surfacing/Mixed Seal Surfacing (Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade including cost of tack coat of emulsion bitumen at rate of 2.00 Kg./10 Sqmt. etc. complete as per MoRTH specification clause No. 508 complete in all respects. ) (R A attached for Bitumen using 47.82 kg per MT of mix ) (a) Laying the mixed materials with paver finisher [As Per RA atteched] Using VG - 40 Grade Bitumen

Close Graded Premix Surfacing/Mixed Seal Surfacing (Providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.09 mm (Type-a) or 13.2 mm to 0.09 mm (Type-b) aggregates using bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a Smooth wheeled roller 8-10 tonne capacity, and finishing to required level and grade including cost of tack coat of emulsion bitumen at rate of 2.00 Kg./10 Sqmt. etc. complete as per MoRTH specification clause No. 508 complete in all respects. ) (R A attached for Bitumen using 47.82 kg per MT of mix ) (a) Laying the mixed materials with paver finisher [As Per RA atteched] Using VG - 30 Grade Bitumen

Bituminous Concrete: Providing and laying average 30 mm thick bituminous concrete with 100-120 TPH batch type hot mix plant/Drum Mix Plant 60-90 TPH producing an average output of 75 tonnes per hour capacity using crushed aggregates of specified grading, premixed with Bituminous Binder minimum of 5.4 % percent by weight of total mix or as per 5th Revisin of MoRT&H Specification of Road and Bridge work, of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification (5th Rev.) clause No. 507 complete in all respects including tack coat with emulsion at 0.2Kg per Sqm on existing road (Grading-II) (13.2 mm Nominal Aggregate size) Using VG - 40 Grade Bitumen

Bituminous Concrete: Providing and laying average 30 mm thick bituminous concrete with 100-120 TPH batch type hot mix plant/Drum Mix Plant 60-90 TPH producing an average output of 75 tonnes per hour capacity using crushed aggregates of specified grading, premixed with Bituminous Binder minimum of 5.4 % percent by weight of total mix or as per 5th Revisin of MoRT&H Specification of Road and Bridge work, of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification (5th Rev.) clause No. 507 complete in all respects including tack coat with emulsion at 0.2Kg per Sqm on existing road (Grading-II) (13.2 mm Nominal Aggregate size) Using VG - 30 Grade Bitumen

Providing and laying Avarage 50 mm thick Dense Graded Bituminous Macadam with 100-120 TPH batch type HMP /Drum mix Plant 60 to 90 TPH capacity producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 Grade bitumen @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(ii) Grading - ii (50-75mm thickness using 4.5% Bitumen) Using VG - 40 Grade Bitumen

Providing and laying Avarage 50 mm thick Dense Graded Bituminous Macadam with 100-120 TPH batch type HMP /Drum mix Plant 60 to 90 TPH capacity producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 Grade bitumen @ 4.0 to 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.(ii) Grading - ii (50-75mm thickness using 4.5% Bitumen) Using VG - 30 Grade Bitumen