REPAIR TO FENCING HARD STANDING AND KERBSTONES UNDER AGE B R II MAINT AT INA EZHIMALA

Amount

Demolition of brick work, PCC block or stone masonry built in cement mortar complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid blocks type B1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 complete all as specified and as directed.

M&L for laterite stone walling of regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed by Engineer-in-charge.

M&L for walling of squared rubble, regular coursed, well bonded, bedded & solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M&L for laterite stone pitching of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete in road side berms etc complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4 type B-1, (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B- 1 (using 20mm graded stone aggregate) as in road berms and finishing top surface even and rough complete all as specified and as directed.

M&L for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A' including necessary formwork etc complete all as specified and as directed.

M&L for providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling), corbels, brackets, kerbs etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match, type C1, 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:6 complete all as specified and as directed.

M&L for providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match, type B1, 1:2:4 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:4 complete all as specified and as directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for 75mm thick moorum filling as in berms including spreading, levelling, watering and well ramming and rolling with 8 to 10 tonne power road roller / with vibratory roller HD 99 VV or equivalent roller to required gradient and camber complete all as specified and as directed.

Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc laid, bedded and pointed in any mortar complete all as specified and as directed.

M&L for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for marble (Makrana Doogri) of approved shade, 18-20 mm thick, machine cut (cut to size in square shape) laid over & including 20 mm thick (average thickness) cement mortar (1:4) screed bedded and jointed with white cement slurry and pointed with grout of matching shade including all necessary cutting & waste and machine polishing (mirror finish) in floors complete all as specified and as directed.

M&L for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6, and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed.

M&L for 25mm thick flame finished sadarahalli machine cut stone of approved colour and shade as in floors, skirting/dado etc over and including 15mm thick backing coat in CM 1:4, laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab complete all as specified and as directed.

M&L for machine cut kota stone slab flooring with 20-25mm thick over and including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for machine cut kota stone slab 20-25 mm thick in riser of steps, skirting-dado and pillar laid , jointed with grey cement slurry and pointed with white cement mixed with pigment to match the shade of the slab over and including 15 mm thick backing coat in CM 1:4 complete all as specified and as directed.

Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and as directed.

M&L for stone grit to cushion bed below interlocking paver blocks complete all as specified and directed by Engineer in charge.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment complete all as specified and as directed.

All as per item No.23 above but except tiles complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and as directed.

S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similiar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

S&F hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similiar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

S&F PVC coated chain link fencing ( mesh 50 mm x 50 mm size) nominal dia of wire 3 mm ( including PVC coating ) fixed to fencing posts using suitable bolts and nuts complete as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement mixed with liquid water proofing compound (Work in foul condition and in shaft) complete all as specified and as directed. Note:- Liquid water proofing compound shall be measured & paid separately.

M&L for rendering 15mm thick on stone masonry external surfaces in cement mortar 1:4 and finish the surface even and smooth complete all as specified and as directed.

M&L for struck pointing to squared rubble, coursed or uncoursed in cement mortar 1:3 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old/new surfaces complete all as specified and as directed.

Gates Infra Construction Co

SATHEESAN.T.K

KDR CONSTRUCTION

RS ENTERPRISES

OM ENTERPRISES

M/s K V Ramachandran

Benchmark Engineers and Contractors

K P DIVAKARAN

LAKSHMI BUILDERS

Sreekrupa Enterprises