Supply, Installation, Testing and Commissioning of Centralized Medical Gas Pipe Line System and other allied accessories Under PM care funds to be installed at 200-Bed (Covid-19 Hospital) Kurbathang Kargil

Amount

Supply, Installation, Testing and Commissioning of Centralized Medical Gas Pipe Line System Under PM care funds to be installed at 200-Bed (Covid-19 Hospital) Kurbathang Kargil as per Annexure "D" of the NIT. OXYGEN SYSTEM

Main Oxygen Manifold 6x 6 cylinders with NRV's, Tail pipes and Middle frame

Fully - automatic Oxygen Control Panel (indigenous) with automatic changeover from Running Bank to Reserve Bank of cylinders and having non-halogenated polymer in the high pressure side of the primary regulators and 40 micron inlet filter

5-cylinder Emergency Oxygen Manifold complete with tail pipe, NRV and Pressure Reducung System having non- halogenated polymer materials in the high pressure side of the regulator

COMPRESSED AIR SYSTEM

Triplex air plant system (Consisting of 3 nos Air Compressors), Tank Mounted, each Receiver Capacity 500 ltrs, common Air drier, Pressure Reducing Unit etc. 3-Stage Breathing Air Filter as per specifications,

VACCUM SYSTEM

3 nos. rotary vane vacuum pumps with Receiver, Filters, Electricals, etc. as specified in the spec

COPPER PIPING AS PER EN 13348

Copper Pipe for Medical use with 12 OD X 1.0 mm

Copper Pipe for Medical use with 15 OD X 1.0 mm

Copper Pipe for Medical use with 22 OD X 1.0 mm

Copper Pipe for Medical use with 28 OD X 1.0 mm

Copper Pipe for Medical use with 38 OD X 1.0 mm

FACTORY DEGREASED ISOLATION VALVES FOR MEDICAL USAGE WITH BRASS ADOPTERS

1. Isolation Valve for 15 mm Copper Pipe i.e (1/2")

2. Isolation Valve for 22 mm Copper Pipe i.e (3/4")

3. Isolation Valve for 28 mm Copper Pipe i.e (1")

VALVE BOX (WITHOUT VALVES) FOR MEDICAL USAGE

1. Valve Box - 4 Gas Service (size 15mm X 15mm X 22mm) with NIST Connection &S.S.Valve for O2

DIGITAL ALARM SYSTEMS

1. 4 Gas Microprocessor Controlled Alarm With Digital Display

GAS OUTLETS

Double Lock with probe - Oxygen

Double Lock with probe - AirMedical Air Set

Double Lock with probe - Vacuum Set

SUCTION AND OXYGEN THERAPY

PRODUCT

Oxygen Flowmeter BPC (0- 15 LPM) with 600ml bottle Humidifier Set

Ward Vacuum Unit with Regulator and 600ml polycarbonate jar Set

High Pressure Tubing

BED HEAD PANEL

SITC Fully Automatic Voltage Regulator Duly Filled With Recommended Oil Upto Full Capacity. Type = Fully Automatic Servo Voltage Regulator Rating = 250 KVA Input Voltage Range (Phase To Phase) =270-460 V Output Voltage Range (Phase To Phase) =415±1% Output Wave Form = True To Input Input Frequency = 45-55 Hz Response Time = 10 Msec Correction Speed = 25-65 V/Sec Correction Method = Stopless Correction Cooling = Oil Efficiency = Better Than 98% Control Circuit = Fully Automatic Ic Based Solid Stat, Operation = Fully Automatic Suitability = Suitable For 3-Phase Unbalanced Supply Unbalanced Load Operating Temperature Ambient = -15oc To 45oc Above ADDITIONAL FEATURES = i)High and low voltage cutoff system. ii)Over load and short circuit protection iii) Single phase prevention system. iv) Phase sequence change protection. v) Earth fault protection. vi) High grade CRGO lamination. vii) Simple rugged construction. viii) 99.9% pure copper. ix) High efficiency. x) Negligible wave form and power factor distortion

Maintenance free earthling:- S.I.T.C. of long life maintenance free electrolytic earthling system with 10 feet vertical k type copper not less than 2”( 50.8mm) ID and not less than 0.08” (2.03mm) wall thickness ,which does not require manual addition of water .The system should be corrosion resistant pre- filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. Rated for high fault currents bas bar rated for 10KA, fault current bus bar connection type as “Terraweld” to withhold temperature of 7000C.The earthling port shall be designed and supplied with poly plastic port cover non conductive, environment friendly and lockable. The job includes excavation of pit, disposal of earth, installation of rods refilling with suitable earth and leveling copper strip etc.

Installation ofMain Electrical Panel: The main electrical control panel should be of required Amp. The panel should have automatic starter, over load protection, single phase preventer, timer assemblies, emergency stop buttons and indication lamps etc for successful operation of all the components of oxygen plant. All the above equipment should be integrated and controlled through a single electrical control panel

P/Laying Power/Control Copper Cables in Solid Copper Conductor in Single Core XLPE Insulated, PVC inner sheathed, unarmoured including lugs/thimbles of respective size. 01. 2.5-Sqmm=350-M 02. 6-sqmm =500-M 03. 95-Sqmm =300-M 04. 185-Sqmm=400-M

BHAT ENGINEERING WORKS