REPAIR AND MAINTENANCE OF FENCING AND STEEL GATE AT OTM ACCCN AREA AGE BR II UNDER GE NORTH BINNAGURI

Amount

SCHEDULE A CIVIL WORKS Dismantling posts or struts (wood, steel or R.C.C.) any section embedded in natural ground , including taking out embedded portion and making good disturbed ground complete all as specified. ( Note :- the vertical height above GL shall be measured for the purpose of payment towards work done)

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundations etc. or for shafts, well cess pits, manholes, pier holes,etc. but not exceeding 10 sqm on plan getting out in soft/loose soil complete all as specified.

Returning ,filling in , including spreading , levelling , watering and well ramming in layer not exceeding 25 cm thick in soft/ loose soil complete all as specified.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Material and labour for plain cement concrete 1:3:6 type C-1 using 20 mm graded crushed stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level, including removing of demolished material from work site at any distance outside MD land complete all as specified and directed.

Demolition Brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles including removing of demolished material from work site complete all as specified.

Material and labour for brickwork with fly ash bricks, old size, having compressive strength 75Kg sqcm, straight or curved on plan to any radius built in cement and sand mortar 1:4 complete all as specified.

All as per item No 8 here in before but except bricks complete all as specified and directed. Notes :- Serviceable bricks obtained from dismantling shall be reused

Material and Labour for rendering 15 mm thick on fair faces of brick or concrete surfaces finishing surfaces even and smooth without using extra cement in Cement mortar 1:4 all as specified and directed.

Material and labour for 60 mm thick factory made chamfered edge Machine pressed precast cement concrete interlocking paver block chemically treated any shape , size and colour confirming to IS 15658-2006 of M-35 Grade, design and pattern as in footpath, parks lawns, drive ways or light traffic parking etc. made by table vibratory method using PU mould, laid over and including 50 mm thick compacted bed of fine sand compacting and proper embedding/ laying of inter locking paver block into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

Dismantling of mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing, including removing of rusted unserviceable wire from work site and keep serviceable wire for reused in safe custody all as directed.

Material and labour for Mild steel Galvanised, (hot dipped galvanised) 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts , including, securing or tying at crossings with and Provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed.

Material and labour for fixing only Mild steel Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts , including, securing or tying at crossings with and provision of galvanised mild steel wire , staples or steel pins etc. as directed ( each line wire to be measured) all as directed. (Note: Material obtain from dismantling item)

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enameled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Material and labour for preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

Dismantling of chain link wire mesh of any type including removing of rusted unserviceable wire mesh, flat iron, round bar MS, nuts & bolts from work site and keep serviceable wire mesh, flat iron, round bar MS, nuts & bolts for reused in safe custody all as directed.

Supply only galvanised steel wire, (Hot dipped galvanised), 75 mm x 75 mm mesh,size chain link made up into mattresses or cages, all as specified.

Fixing only chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed.

Fixing only old serviceable chain link fencing to post old and new including line wires, any mesh , size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as directed. Notes :- Serviceable chain link fencing obtained from dismantling shall be reused

Supply and fix mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290-Gde E-165 complete all as specified and directed.

Material and labour for Mild steel bars round bar 10mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.

Material and labour for preparation of new steel surfaces of any description not otherwise described not exc.10 cm width or girth and applying two coats of synthetic enameled paint (1st quality) over one coat of red oxide Zinc chrome primer complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, removing of unserviceable material from work site complete all as specified and as directed.

Supply and fixed rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings ( exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening grade Fe-410 (Gde-E-250) quality- A complete all as specified.

Material and labour for precast reinforced cement concrete type M-25, Design Mix (20 mm graded aggregate) in precast poles, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 and n exc 250sq.cm. With or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified. Note : Design Mix shall be as per approved Design Mix of CWE/CE's running contracts.

Material and labour for Mild steel deformed or twisted bars (TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns/slab/ as in ribs, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Material and labour for Mild steel deformed or twisted bars (TMT) 8 mm dia and over, as in stirrups spacers and binder, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns / slab, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

Material and labour for Mild steel TMT bar 6mm dia cut to length, bent to shape required as in nibs , including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified.

samrat saw mill and joinery workshop

M/S SINHA ENTERPRISE

M/S D S CONSTRUCTION CO

M/S PLABAN KUMAR GOPE

BBKundu

M/s. MD IRSHAD

M/S RELIABLE CONSTRUCTION CO.

N K Construction

R K AGARWAL