CERTAIN REPAIR TO JOINERY ROOFING FLOORING PLASTERING WATER SUPPLY PLUMBING SANITARY FITTINGS AND TREATMENT ON ROOF SUNKEN PORTION IN MD AND OTM ACCN CHARGES INCL MES MD ACCN AT RTS AND DEPOT HEMPUR UNDER GE EAST BAREILLY

Amount

Taking down shutters only of any description area n'exc 1.00 sqm complete all as specified and directed.

Taking down shutters only of any description, area exc. 1.00 sqm but n,exc. 2.00 sqm, each, complete all as specified and directed.

Refixing of shutters only of any description area n'exc 1.00 sqm at same opening complete all as specified and directed.

Refixing of shutters only of any description area exc. 1.00 sqm but n,exc. 2.00 sqm, each at same opening complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area n'exc 1.5 sqm complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exceeding 1.5 sqm but n.exc 4.00 sqm complete all as specified and directed.

Refixing of chowkhat frame area n'exc 1.50 sqm at same opening complete all as specified and directed.

Refixing of chowkhat frame area exceeding 1.5 sqm but n.exc 4.00 sqm , each at same opening complete all as specified and directed.

S & F 35mm thick IInd class hard wood glazed or skeleton shutters, open rebated and prepared to receive glass, gauge etc. (without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitered bead for securing glass etc,. Sizes of member of shutters as specified in SSR Part-I,2009, section 8, clause 8.21,complete all as specified and directed.

S & F 35mm thick IInd class HW plain framed panelled shutter (any numbers of panel) with lock rail & panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneered on both faces.The size of rail as per IS: 1003 (part-I), kiln seasoned & chemically pressure treated all as spd.

S & F 35mm IInd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc. (with sash bars), divided in to square, edges of framing plain, chamfered or rounded ,fitted with cut and mitered bead for securing glasses etc, window ventilators etc are provided with styles and rails as specified in SSR Part-I, 2009, Section- 8, Clause 8.21, complete all as specified and directed.

S & F solid PVC door frame size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tubes, suppling and fixing in opening as per specification and drawing complete all as specified and directed.

S & F of factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' chanel having PVC sheet strips of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail,bottom, lock rails on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet, beading, and joined together with solvent cement, suppliing and fixing in the frame at site as per specification and drwing complete all as peccified

S & F steel window with side hung shutters including projecting type hinges with steel handle, tower bolt and steel peg stay complete with glazing bars dovetailed or welded comlete all as spd and directed.

S & F steel window with side hung shutters including projecting type hinges with steel handle, tower bolt and steel peg stay complete without glazing bars dovetailed or welded comlete all as spd and directed.

S & F steel ventilator with top/centre hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars dovetailed or welded comlete all as spd and directed.

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed.

S & F 3mm thick figured glass pine head type and glazing with oil putty in square n' exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar or for inserting holdfasts or man holes and making good dismantalled portion in CM (1:3) or cement concrete (1:2:4) type B1 as required. complete all as specified and directed.

S&F Mild steel work in framed work such as grills, gratings, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work conforming to Fe 410 -0 or Fe 310 -0

S&Fsecond class hard wood plain solid straight chowkhats and frames wrought frammed ribated on the solid rounded or chamfered put together with glue pinned at joints.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned taks or galvanised wire staples.

All as per above Item no 23 but fix in repair

M & L for IInd class hard wood fillets square, rectangular or triangular insection, chamfered on edges & face and bullnosed for sectional area n' exc 3 Sqcm complete all as specified and directed.

S & F Mild steel work as in holdfast conforming to Fe 410 -0 or Fe 310 -0 complete all as specified and directed.

S & F 200mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

S & F 100mm long mild steel barrel tower bolts stove enamelled black with bright bolt all as specified and directed.

Supply and fix only 100mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

Supply and fix only 75mm long butt hinges medium weight cold rolled mild steel all as specified and directed.

S & F 150mm long mild steel pressed handle oval type stove enamelled black all as specified

S & F 100mm long mild steel pressed handle oval type stove enamelled black all as specified

S & F for 200mm long berrel tower bolt aluminium anodised with staples and bolt of extruded section complete all as spd. & directed.

S & F for 100mm long butt hinges extruded aluminium anodised complete all as spd. & directed.

S & F 150mm long extruded aluminium anodised handle S & F 150mm long mild steel pressed handle oval type stove enamelled black all as specified

S & F 300mm mild steel ordinary rat rail , rod pattern springs including roller and roller plate( Helical door spring), complete all as specified and directed.

M & L 300mm long mild steel sliding door bolt, plate type stove enamelled black with bright bolt not less than 12mm dia and including minimum 6 bolts and nuts etc all as specified and directed.

Preparation newly wooden surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of pink primer complete all as specified and directed.

Preparation newly steel surfaces exc. 10 cm width or girth and applying two coat of synthetic enemelled paint over a coat of red oxide including all preparation complete all as specified and directed.

Demolition of brick / stone work built in cement mortar including all quians, pillars etc. complete all as specified and directed.

M & L for brick work with sub class 'B' bricks in cement mortar 1:6 straight or curved on plan exc. 6.00m mean radius with old size bricks complete all as specified and directed.

_ All as per above Item no 41 but half brick in CM(1:4)

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as directed and specified

M & L glazed ceremic colour tile in vertical surface of size 300x200x7mm thick as in dado/skirting etc set and jointed in neat cement slury and pointed in white cement with colour pigments to match including 10 mm thick rendering in CM 1:4 finished even and smoothout without using extra cement complete all as spd.

M & L Non skid ceremic colour tile 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.11 Sqm and n'exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in cm 1:6 for laying of flooring complete all as spd and directed.

All as above item No 45 but on vertical surface and including10mm thick rendering in CM 1:4 instead of 15mm thick screed bed in cm 1:6 for receiving floor finishes etc complete all as spd and directed.

M & L Vetrified ceremic tile light shade tiles 8 mm thick (squire/rectangular) polished area of each tiles n' exc 0.36 sqm in floors etc set and jointing in neat cement slullry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 for laying of flooring etc complete all as spd and directed.

All as per above item No 47 but on vertical surface and including10mm thick rendering in CM 1:4 instead of 15mm thick screed bed in cm 1:6 for receiving floor finishes complete all as spd and directed.

M & L Non skid ceremic colour tile 7.00 to 8.00 mm thick (square/rectungular) area exc. 0.06 Sqm and n'exc 0.11 Sqm in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer of mortar in cm 1:6 etc complete all as spd and directed.

Taking up or down steel tubing and connections including cleaning for refixing or removal from site of 15mm bore of pipe complete all as specified and as directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, size of pipe 20mm bore complete all as specified and directed.

S & F steel water tubing of 15mm bore of tube medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing 'medium grade' galvanized with and including all GI fittings and fixed complete to walls and ceiling or laid in floors 20mm dia complete all as specified and directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 15mm bore complete all as specified and directed.

Refixing old retrieved steel water tubing and connections in new or old position (Walls, ceiling, floors, etc.) 20mm bore complete all as specified and directed.

S & F and repair 15 MM bore bib tap standard of PTMT any colour screwed down high pressure with crutch or capastan head screwed both ends for iron 15 mm bore pipe or for unions ( Minimum weight 120 Gms) etc complete all as spd and directed.

S & F in repair 15 MM bore stop valves of PTMT screwed down high pressure, with crutch or capastan head screwed both ends ( minimum weight 110 Gms) etc complete all as spd and directed.

S & F in repair 15 MM bore concealed stop valves long shank cost copper allow chromium plated fency type screwed down high pressure, with capstan handle long shank screwed both ends etc complete all as spd and directed.

S & F of sink with drainage board made of stainlen steel 1 mm thick kitchen or lab with plugs washers and water incl bedding in cement work to drawt wall or incl fixing contilever bracket and connecting union to pipe over all size 915 x 460 mm bolw size 410 mm x 330 mm x 160 mm. etc complete all as specified and directed.

S & F and repair 15 MM bore fency type bib tap chromium plated screwed down high pressure with crutch or capastan handle screwed both ends for iron 15 mm bore pipe or for unions all as specified.

S & F in repair 15 MM bore stop valves cost copper allow chromium plated fency type screwed down high pressure, with crutch or capastan handle screwed both ends etc complete all as specified and directed.

S & F and repair 15 MM bore pillar cock fency type cast copper alloy with capastan head,chromium plated, screw down, high pressure, screwed for iron pipe of 15 mm bore with all etc complete all as specified and directed.

S & F and repairs fo brassChromium plated shower rose 125mm size with or witout swivel joints including fixing to GI pipe all as specified and directed.

S & F for 20 mm dia Harrision curtain rails mild steel chromium plated including with fixing brackets stop rollers etc complete all as specified and directed.

S&F PVC 10 ltr capacity symphonic action type, low level, flushing cistern, white, with inlet, ball valve, float and handle including MS suitable size bracket complete all as specified and directed.

S&F in repairs vitreous China water closet Orissa pattern of size 580x440mm , white, with 'P' ro 'S' trap and integral foot rest, front or back inlet and flush pipe of polytheylene 32mm dia for low level cistern including provision of cement concrete bedding complete all as specified and directed.

S & F vitreous China wash hand basin, of size 550 x 400mm including brackets, flat back with waste pipe and CI grating including all connections, fixed in repair, complete all as specified and directed.

S&F PVC connection 15mm size with PTMT nut of length 450mm complete all as specified and as directed.

M&L for 32/50mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed

S & F PVC waste pipe of 32 mm dia PVC socket for WHB/Kitchen sink complete including sink cuppling complete all as specified by and directed

S & F for 100 mm dia of grating doom of PTMT (minimum weight 25 gms) etc complete all as specified and directed.

Dismantling PVC/RCC water storage tanks and removing from site exc 250 ltr but n.exc 500 Ltrs capacity and S&F rotational moulded polytheylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position with polythene float and fly nut screwed for iron pipe of 20mm dia or for union as specified complete ll as specified and directed.complete all as specified and directed.

S&F in repairs Plain Aluminium sheet 0.56mm thick fixed with nails at bottom , back and front side of wooden doors etc all as directed and specified

S&F 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe etc complete all as specified and directed..

S&F 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe etc complete all as specified and directed..

S&F as in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 20mm bore etc complete all as specified and directed..

S&F in repair float valves PVC high pressure with polythene float and fly nut complete, screwed for iron pipe 15mm bore etc complete all as specified and directed..

Taking down cement plaster on brick/stone wall etc including raking out joints/hacking for key scrubbing down with water etc including removal of rubbish to a distance upto 100 mtr complete all as specified and as directed.

M&L 15mm thick rendering in CM 1:4 in two coats (10mm+5mm), second coat mixed with water proofing compound on brick work or concrete surface finished fair and even complete all as specified and as directed. Note :WPC will be measured & paid separately)

M&L 10mm thick rendering in CM 1:6 on brick work or concrete surface finished even and smooth complete all as specified and as directed.

M&L 5mm thick rendering in CM 1:3 as on ceiling finished even and smooth without using extra cement complete all as specified and as directed.

M&L Three coat of white wash on new plaster surface after necessary preparation of surface complete all as specified and as directed.

M&L Three coat of white wash as on new plaster surface/concrete surface as on ceiling after necessary preparation of surface complete all as specified and as directed.

M&L two coats of cement base paint on new plastered surface after necessry preparation of surface complete all as specified & directed.

Supply only integral water proofing compound.

Dismantling of CI/PVC pipes or reinforced concrete drain pipe, jointed in cement mortar and taking out of trenches if required upto 100mm bore including fitting complete all as specified and directed.

S & F 75mm dia spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors, in shaft portion up to 12 m height complete all as specified and directed. ( ISI marked and conforming to relavent IS)

All as per itm no 89 above but Except Pipe

S & F 100mm bore spun type, cast iron, soil waste and vent pipe in any length, with or without ears, with cement joints, laid in trenches or under floors, in shaft portion up to 12 m height complete all as specified and directed. ( ISI marked and conforming to relavent IS)

All as per itm no 91 above but Except Pipe

S & F in repairs CI bend 75 mm (any radius) or diminishing pieces (Tee,Elbow,Double Tee & socket) etc complete all as specified and directed.

S&F CI bends (any radius) 100mm bore (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.

Taking out unserviceable Nahani trap / floor trap and M&L for 75 mm dia Nahani trap / floor trap with CI grating with lead joints, complete all as specified and directed. ( ISI marked and conforming to relavent IS)

Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern as in roof covering etc complete all as directed.

Dismantling of asbestos cement (corrugated, semicorrugated etc) sheet in roof covering etc complete all as directed.

S & F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with L & J type hook bolts and washers in roof, waals etc with grade of zinc coating 275 complete all as specified and directed.

M & L for 6mm thick AC sheet corrugated or semi corrugated sheet in roof covering fixed with J and L hook etc complete all as specified and directed.

M & L for 6mm thick AC two pieces adjustable plain wing ridge fixed with coach screw etc complete all as specified and directed.

Demolition of cement concrete in ground floor paving n. exc. 15 cm thick below or above GL etc complete all as specified and directed.

M&L, 50 mm thick cement concrete 1:3:6 type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection/path laid to slope of 1 in 12 and finishing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges complete all as specified and directed.

M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in floors laid in panels and finishing top surfaces of cement concrete even and smooth without using extra cement including fixing only glass dividing strips to divide the area in panels and inserted in position to conform to design complete all as specified and directed.

Supply only glass dividing strips 3 mm thick and 38 mm wide complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes sigle socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed by Engineer-in-charge.

S & F in repairs PVC (SWR) bend 110 mm any radius (Tee, Double Tee,Elbow, Socket) complete all as specified and directed.

S & F 75mm dia PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to wall with neceesary FI Clamp of size 40X6 mm complete all as specified and directed.

S & F in repairs PVC (SWR) bend 75 mm any radius (Tee,Elbow & Bend as required as per site) complete all as specified and directed.

Demolition of cement concrete reinforced in any position including cut of bars as required, complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in slab suported on walls and column in floor, roof landing, balconies,canopies deck slab and in shelves and man hole covers and the like including all necessary form work complete all as specified and directed.

M & L for RCC in 1:2:4 type B-1 using 20mm graded stone aggregate as in Fins, Fecias, louvers, parapet, railings and artificiar work exc 60 cm in height, newels, balustrade and the like complete all as specified and directed.

M & L formwork to soffits of suspanded slab such as roof slab, floor slab landing and similar work n' exc. 200 mm thick including fair finished complete all as spd and directed

M & L mild steel TMT bars,10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia or securing with clips quality conforming to Grade-I IS-432 (Part -I), complete all as specified and directed.

_All as per item no 113 above but 5 mm dia and overupto and including 10 mm dia in striupps

M&L 20-22 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging etc complete all as specified and directed.

S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed etc complete all as specified and directed.

M&L for repairing to existing aluminium doors of any size by straightening of frame / shutter, replacing the detoriated member with new, replacing the broken / non funcional hinges with new, replacing decayed rubber gasket with new, replacing the broken glass pane of any size with new 5.00mm thick tinted glass, replacing unserviceable handle, tower bolt, lock, floor spring, foundation box with governing pivot, top pivot, peg stay etc with new and including taking down and at same place after making the door / window smooth functional complete all as specified and directed.

S&F in Vitreous China counter top oval type coloured wash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent

S&F in repair for GI steel sheet cover / lid 0.45m dia and 0.20m ht of 0.8mm thick of semi sphere shape hollow fixed to over head service tank of size 500 ltrs to 1000 Ltrs capacity with proper fixing arrangement of hasp and staple and butt hinges fixed with small nuts and bolts complete all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position for capacity of water tank exc 250 and not exc 500Ltr. (Cleaning repairing, etc. measured separately)

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for.etc complete all as directed.

M& L for cement concrete 1:2:4, Type B-1, using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered edges all etc complete all as specified and directed.

M& L for 50mm thick cement concrete type B2 1:2:4,(using 20 mm graded stone aggregate) with water proofing compound as in roof padding, complete all as specified and directed

M&L for Polythene film, black, 50micron laid in floors and roof etc complete all as specified and directed.

M & L for roof treatment/sunken treatment with Polymeric membrance (APP based) with non woven Polyster mat as reinforcement with following:- (a) M & L for surface preparation by removal of existing treatment of tar felt treatment/PCC/plaster/tilling/loose particle to ensure or clean. Smooth and dry surface and preparing surface (b) M & L for providing & laying a coat of cold applied bitumen 85/25 based primer on entire surface @ 0.300 Ltr/Sqm on dry and clean surfaces. (c) M&L for providing & laying APP based polymeric membrance of n'less than 3mm thickness of weight of n'less than 3.0 Kg/Sqm with non woven polyster fibre as reinforcement on primed surfaces by torch application with side over laps & joints over laps etc apper manufactures instr (d) M & L for finishing of top surfaces by two coat of aluminium paint over and including a coat of blown bitumen 85/25 grade @ 1.2 Kg/Sqm grouted all as specified and as per manufactures instruction (e)Carriedout test with filling of water for continuous 48 hours all as specified and directed. (f) M & L for providing template of size 450x450mm to each bldg where roof treatment is carried out with making CA No date of roof treatment etc all as specified and directed.

M & L for cutting out cracks to V-section in existing roofs or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand in 1:1CM (by weight) etc complete all as specified and directed.

M & L 20 mm thick rendering in 1:4 CM on roof surfaces using without extra cement etc complete all as specified and directed.

M & L PCC (1:5:10) type E-2 (using 40 mm graded stone aggrigate) as in foundation and mass concrete etc complete all as specified and directed.

S&F in repairs of vitreous China wash down water closet pan (pedesrtal pattern), white including connection to drain and to flusing pipe etc complete all as specified and directed. NOTE:- Tenderers may note that amount of credit will be deducted from the total amount arrived at the time of Acceptance of contract.)

M/s Naresh Kalia

RAMAN CONSTRUCTION CO.