Housing Colony at Jarja Nahan District Sirmour HP SH Providing internal electrical installation to 8 Nos Cat II Flats Block No 12 with parking floor

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in -Charge.Group B.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit, with 2-way modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required and approved by the Engineer-in -Charge.Group B.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in -Charge.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.4 Sq.mm. HRFRLS/PVC insulatedsingle core copper conductor cable for earthing as required and approved by the Engineer-in -Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required and approved by the Engineer-in -Charge.

2x1.5 Sq. mm..

2x10 Sq. mm.

Wiring for circuit / sub-main with 4x10 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.10 Sq.mm. (4x10+2x10) HRFRLS/PVC insulated single core copper conductor cable for earthing as required and approved by the Engineer-in -Charge.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required and approved by the Engineer-in -Charge.

2x1.5 Sq. mm..

4x1.5 Sq. mm.

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required and approved by the Engineer-in -Charge.

Supplying and fixing of following sizes of PVC conduit alongwith the accessories in surface / recess including cutting thewall and making good the same in case of recessed conduit as required and approved by the Engineer-in -Charge.

25 mm. dia

50mm. dia

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required and approved by the Engineer-in -Charge. 2 modules (78mmx78mmx50mm)

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required and approved by the Engineer-in -Charge. TV. Socket outlet, modular.

Supplying & fixing Modular blanking plate on the existing modular metal box as required and approved by the Engineer-in -Charge.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required and approved by the Engineer-in -Charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required and approved by the Engineer-in -Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form and approved by the Engineer-in -Charge. 300 mm deep (nominal)

Supplying and fixing Aluminum alloy or wrought aluminium strip bus-bars, suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (38mmx6mm), in the existing enclosure or cubical panel with all accessories including connections etc. as required and approved by the Engineer-in -Charge.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required and approved by the Engineer-in -Charge. 200 Amp. -16 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required and approved by the Engineer-in -Charge. Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in -Charge.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required and approved by the Engineer-in -Charge. 63 Amps. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and approved by the Engineer-in -Charge. Double door-4 way

Supplying and fixing of following way triple pole and neutral, sheet steel MCB distribution board, 415 volts, on surface / recess, with provision for 4-pole MCB/ Isolator/RCCB/RCBO as incomer and SP MCBs as outgoing, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required and approved by the Engineer-in -Charge. Double door-6 way (8+18),horizontal type

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required and approved by the Engineer-in -Charge.

Extra for using salt and charcoal for pipe earth electrode complete as required and approved by the Engineer-in -Charge.

Providing and fixing 6 SWG (4 mm dia.) G.I. wire on surface or in recess for loop earthing as required and approved by the Engineer-in -Charge.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation and refilling the trench etc.as required, but excluding sand cushioning and protective covering and approved by the Engineer-in -ChargeArmoured cable 70sq. mm (3.5core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required and approved by the Engineer-in -Charge size Armoured cable 70 sq. mm (3.5 core)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required and approved by the Engineer-in -Charge. Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Supplying and fixing of fancy wall bracket containing threadtype LED lamp holder (s) of all sizes and shapes, completewith all accessories but excluding LED lamp including making connections, testing etc. as required and approved by the Engineer-in -Charge. Fixed type wall bracket 150 dia, single lamp.(Category-A)

Supplying and fixing of fancy wall bracket containing thread type LED lamp holder (s) of all sizes and shapes, complete with all accessories but excluding LED lamp including making connections, testing etc. as required and approved by the Engineer-in -Charge. Mirror light 460 mm, single lamp.(Category-A).

Providing and fixing surface and wall mounted Extruded Aluminium LED Batten 18 watt extruded aluminium housig provided for efficient heat dissipation with policarbonate diffuser & integrated electronic driver 18 watt Cat. No. BCLSBAL18W CW Bajaj Make or its equivalent make complete as required and approved by the Engineer-in-Charge.

Providing and fixing Surface mounted squire LED Downlights 8 watt with AL die-cast body, finish with drop down PC diffuser to deliver low glare illumination with optimized heat sink for efficient heat dissipation recess mounted pressure die- cast aluminium luminaire in powder coated white finish in round profile with optimized heat sink for effcient heat dissipation , product code BGSLO SLEEK SURFACE 8W WH SQ Bajaj or its equivalent make as required and approved by the Engineer-in- Charge.

Supplying and fixing of concealed fan box with suitable size of phenolic laminated sheet cover in the front complete in all respect as required and approved by the engineer-in-Charge.

Bhardwaj Electrical Co.