Revamp/Refurbishment of Existing serviceable space at DyHS Office

Revamp/Refurbishment of Existing serviceable space at Dy.Head Supervisor office in SWM dept F/South ward

cabin with furniture & electrical work for dy head suoerwiser and administrative officer (size: 9’10” x 7’63/3” x 8’8” x 2 nos) table size 4’x 2’x30” x 2 nos with 1 storage and drawer, key bourd & platform for cpu and 1 platform for keep step. material= plywood isi mark commercial 6mm & teak wood patti 50mm x 40mm for frame work 2’x2’. lamination (sunmica) 1mm, fevicaol marin & other hardware items & 1nos of doors pine wood 30mm with both side lamination & with door closer with locking arrangements. & tables will have half round molding with polish work. providing electricity arrangement for table 4 nos of socket & 2 no of switch, telephone wire, cat-6 (rg6) cable, telephone socket, bell connection & other fittings as per requirements

work station for office clerk staff (size: 4’x2’x6nos with partition heights 4’) table size 4’x 2’x30” x 2 nos with 1 storage and drawer, key bourd & platform for cpu and 1 platform for keep step. material= plywood isi mark commercial 18mm, 12mm & 6mm & teak wood patti 50mm x 40mm for partition frame work 2’x2’, lamination (sunmica) 1mm, fevicaol marin & other hardware items. providing electricity arrangement for table 4 nos of socket & 2 no of switch, telephone wire, cat-6 (rg6) cable, telephone socket, & other fittings as per requirements

overhead storage ( w6.5’ x d14” x h18” x 2 nos)+( w9.10’ x d14” x h18”)+( w7.5’ x d14” x 18” x 2nos) +( w13’ x d14” x h18” x 3nos) + (w6’ x d14” x h18”) and full height storage ( w 7’.4” x d15” x h7’.2”) + ( w6.5’ x d15” x h8’.8”)+( w10’.7” x d15” x 8’.8”) material= plywood isi mark commercial 18mm, 12mm , lamination (sunmica) 1mm, fevicaol marin & other hardware items i.e. handle, lock, hinjis, etc

PARTITION (SIZE: W7.5’ X H 9’ X 3” THICK X 2 NOS) + ( W12.5’ X H5’ X 3” THICK) + ( W4.5’ X H5’ X 3” THICK X 2NOS) Material= Plywood ISI mark Commercial 6mm & Teak wood patti 50mm X 40mm for frame work 2’X2’

providing false ceiling with grid work & 2’ x 2’ doted cooling tiles.

ELECTRICAL ARRANGMENT FOR FALSE CEILING Point wiring 1.5sqmm & 2.5sqmm for AC Polycab , Curcuit 2.5 sq.66mm for computer, plug point 5A, 1 pole MCB 32A- 35A & 20A, & other fittings as per requirements i.e. PVC pipe Black 20mm-25mm & PVC Elbow, PVC Bend, PVC Coupling, equal Tee, equal cross, PVC concealed Box., Providing & installation of 2’X2’X 20NO LED PANALE fittings.

MID BACK CHAIR Providing and supplying center pivot, revolving, Mid backchair Depth-45cm, width-50cm, height- 105cm to 115cm & seatheight45cm to 55cm. (+/- 2cm ) with five legged metal / moulded nylon base with push back arrangement. Chairs shall have high density moulded, 360 revolving on suitable base, gas lift , heavy duty twin wheel castors to take min 80 kg/castor with two - pneumatic height adjustment one piece moulded type polypropylene armrest etc. complete. The chair shall be provided with approved tapestry upto Rs 300/m with necessary beading wherever required. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge

LOW BACK CHAIR Providing and supplying low back chair having size Depth- 62cm, width-55cm, height-80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. Dry film thickness shall bemore than 45 Micron. And as directed by Architect in charge. Allmetal work shall be Epoxy Polyster Powder Coated and as directed by Architect in charge

PAINTING WIORK FOR OFFICE Plastic paint with 2 coat of acrylic putti

Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)

Replacement of main door. door shall be made up of pinewood having size 30mm x 8’ x 4’ with both side lamination (sunmica 1mm) & other hardware items.

file compactor dfmu (qty-1) h-24oo x w-1170 x d 900 mm 6 compartments dfmu-d (qty-1) h-24oo x w-1170 x d 930 mm 6 compartments sffu (qty-1) h-24oo x w-1170 x d 475 mm 6 compartments 0.8mm thickness superstructure, 2.5mm trolly, powder coated (7 tank process)

removing of xisting cabins, partitions, doors and windows/electrical fittings etc.

ceiling fan of 1200 mm sweep with all accessories including electronic regulator for completing installation

Please Enable Macros to View BoQ information