Construction of Art & Commerce College at Netrang Dist-Bharuch

Name of work :- Construction of Art & Commerce College at Netrang Dist-Bharuch

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. No. Item of Work Qty. Unit Rate in Amount

1 Excavation for foundation upto 1.50 mt depth including sorting out and 446.00 Cum 117.08

stacking of useful materials and disposing the excavated stuff upto

mt lead (A) Loose or soft soil.

2 Excavation for foundation upto 1.5to 3 m depth including sorting out and 291.00 Cum 162.38

stacking of useful materials and disposing off the excavated stuff upto

Meter lead.(C) Dense or Hard soil

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness 114.00 Cum 460.19

including watering ramming and consolidating etc. comp. with all lead and

4 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in 170.00 Cum 289.06

thickness including ramming watering and consolidating etc. complete with

all lead and lift.

5 Filling available excavated Earth (Excluding Rock) in trench plinth side of 435.00 Cum 130.39

foundation . in layer not excluding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete

6 Anti Termite System P/L of Permenent piping technology Anti Termite 575.00 Sqm 134.33

treatment before flooring work by installing LLDP (Low linear density

Polyethylene) tube of 8 mm O.D.& 6.4 mm I.D.With in Built Pressure

Compenstaion chif every 30 cm interval in the tube, having working

pressure of 2 kg/cm 2 and realese rate of 1.9 ltr/Hour fixed by P-Clip and

nails . The LLDP pipe shall be installed at the entire periphery of the

building and at internal network of building depth of 20 to 200 mm under

floor every 2 to 3 mtr.c/c distance (adjustble as per building layout ) & Ends

of loop pass through a PVC Elbow of minmum 32 mm ID at junction box of

wall and floor level, entring into a steel reinforcmed grooved flexible pipe

mini.22 mm LD leading into junction box and during injecting chemicls for

termite control tretment. The anti-termite chemical Lmidcloprid 30.5% SC

Mix as per IS 6313(part-III) shall be injected by the pressure pump diluted

with water @ 10.5 ml/5ltr of water at the rate of 2 kg/sq,cm.@ 5 ltr /Smt .the

contractor shall submit approved line plan for piping system and junction

boxes dully approved By Engineer -in-charge with bond of 5 Years warnty .

7 Providing and laying controlled cement concrete M.150 for curing complete 30.00 Cum 3671.79

excluding cost of formwork and reinforcement for reinforced concrete work

in (A) Foundations, footings,Base of columns and Mass concrete For PCC

8 Providing and laying controlled cement concrete M-250 and curing 82.00 Cum 4259.17

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Footing and Mass concrete

9 Providing and laying controlled cement concrete M-250 and curing 24.00 Cum 7261.90

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in (d) columns Up to Plinth level.

10 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 80.00 Cum 2965.76

machine cut stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

11 Providing and laying controlled cement concrete M-200 and curing 30.00 Cum 7199.28

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and

12 Providing and laying controlled cement concrete M-200 and curing 30.00 Cum 7237.66

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and

It. No. Item of Work Qty. Unit Rate in Amount

13 Providing and laying controlled cement concrete M-200 and curing 12.00 Cum 7276.04

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and

14 Providing and laying controlled cement concrete M-250 and curing 64.00 Cum 5646.91

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Plinth & Ground BEAMS

15 Providing and laying controlled cement concrete M-150 and curing 86.00 Cum 4093.53

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in plinth Slab

16 Providing and laying controlled cement concrete M-200 and curing 79.00 Cum 6550.86

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Slab for G.floor

17 Providing and laying controlled cement concrete M-200 and curing 80.00 Cum 6589.24

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Slab for First Slab

18 Providing and laying controlled cement concrete M-200 and curing 4.00 Cum 6627.62

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in Slab for Second Slab

19 Providing and laying controlled cement concrete M-200 and curing 62.00 Cum 5844.87

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in beam for Ground floor

20 Providing and laying controlled cement concrete M-200 and curing 63.00 Cum 5883.25

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in beam for First floor

21 Providing and laying controlled cement concrete M-200 and curing 5.00 Cum 5921.63

complete including the cost of form work but excluding the cost of

reinforcement for reinforced concrete work in beam for Second floor

22 Providing and laying controlled cement concrete M-200 and curing etc. 6.00 Cum 6347.85

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Chhajja for G. floor

23 Providing and laying controlled cement concrete M-200 and curing etc. 6.00 Cum 6386.23

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Chhajja for First floor

24 Providing and laying controlled cement concrete M-200 and curing etc. 0.57 Cum 6424.61

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Chhajja for Second floor

25 Providing and laying controlled cement concrete M-200 and curing etc. 3.00 Cum 8275.94

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Lintel for GF floor

26 Providing and laying controlled cement concrete M-200 and curing etc. 2.00 Cum 8314.32

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Lintel for First floor

27 Providing and laying controlled cement concrete M-200 and curing etc. 1.00 Cum 8352.70

complete including the cost of form work and reinforcement for reinforced

concrete work in (c) Lintel for Second floor

28 Providing and laying controlled cement concrete M-200 and curing etc. 6.00 Cum 6699.33

complete including the cost of form work and excluding the cost of

reinforcement etc. complete in (E) Stair case up to floor two level for

Ground Floor to first floor

29 Providing and laying controlled cement concrete M-200 and curing etc. 5.00 Cum 6737.71

complete including the cost of form work and excluding the cost of

reinforcement etc. complete in (E) Stair case up to floor two level for First

Floor to Second floor

30 Providing and laying controlled cement concrete M.200 and curing 1.00 Cum 7519.45

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of foundation level upto floor two level

31 Providing and laying controlled cement concrete M.200 and curing 4.00 Cum 7556.82

complete excluding the cost of formwork and reinforcement for reinforced

concrete work in (B) Walls, from top of foundation level upto floor two level

32 Providing and fixing Stainless steel Hand railing made from anticorrocive 35.00 Rmt 1521.06

304 grade S S Horizontal pipe of 50 mm dia (16Gauge) and 35mm dia

Vertical support at every 1.2m distance including hook and necessary

Fixture and Fitting tools as per directed engineer in-charge

It. No. Item of Work Qty. Unit Rate in Amount

33 Providing and fixing 90 cm high Stainless steel railing made from 53.00 Rmt 2848.20

anticorrocive 304 grade S S pipe of 50 mm dia (16Gauge) as hand rail with

S S 304 grade Baluster of 38 mm dia (16Gauge) as a vertical support fixed

in RCC slab at 1.2m c/c including three horizontal S S pipes of 25 mm dia

(16Gauge) at eqal distance fixed by 18.75 mm dia (16Gauge) S S pipe with

baluster including accessories as per detailed drawing as directed etc.

34 Providing and fixing eco-friendly light weight calcium silicate false ceiling 338.00 Sqmt 1648.96

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation. The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/ Spintone/ Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’ runner suitably spaced at

joints to get required length and size of 24 X 38mm made from 0.30 mm

thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24 X

28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along

spaced between main 'T' at 600mm centre to centre to form agrid of

1200x600mm and size 24x48mm made of 0.30mm thick (Minimum) sheet

to be interlocked at middle of the 1200x600mm panel to form grid of size

600x600mm resting on periphery walls/partitions on a perimeter wall angle

pre-coated steel of size (24x24x3000mm made of 0.40mm thick (minimum)

sheet with the help of rawl plugs at 450mm centre to centre with 25mm long

dry wall screws @ 230mm interval and laying 15mm thick densified edges

light weight calcium silicate ceiling tiles of approved texture (Fine

fissured/Cosmos/Spintone) in the grid including cutting/making opening for

services like diffusers, grills, light fittings, fixtures, smoke dtectors etc.,

wheneveer required, Main 'T' runners to be suspended from ceiling using

G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasterners, 4mm G.I. adjustable rods with galvanized steel

evel clips of size 85x30x0.8mm, spaced at 1200mm center to centre long

main 'T' bottom exposed with 24mm of all T-sections and also provide

additional frame work and suspended G.I. support as required height shall

be pre-painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-charge. Note:- Only

Providing silicate

FE 500Darea reinforcement

will be measuredforfrom wall to

R.C.C. wall.including

work No 91558.15 Kg 76.76

bending, binding and placing in position complete upto floor two level

36 Brick work using common burnt clay building bricks having crushing 86.00 Cum 4021.02

strength not less than 35 kg/sq.cm. in foundation and plinth in cement

mortar 1:6 (1 cement : 6 fine sand) Conventional

37 Brick work using common burnt clay building bricks having crushing 102.00 Cum 4289.33

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine sand)

Conventional {Ground FLoor}

38 Brick work using common burnt clay building bricks having crushing 95.00 Cum 4557.64

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine

sand)Conventional {First FLoor}

39 Brick work using common burnt clay building bricks having crushing 40.00 Cum 4866.08

strength not less than 35 Kg/Sq.cm. in super structure above plinth level

upto floor two level in cement mortar 1:6 (1cement : 6 fine

sand)Conventional {2rd FLoor}

40 Half brick masonry in common brunt clay building bricks having crushing 56.00 Sqm 651.67

strength not less than 35Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in

super structure. Conventional for Ground floor..

41 Half brick masonry in common brunt clay building having crushing strength 56.00 Sqm 703.51

not less than 35 Kg/Sm. In C.M 1:4( 1cement : 4 coarse sand) in super

structure.Conventional for first floor.

42 Providing 15mm thick mala cement plaster in single coat on Rough (Similar) 974.00 Sqm 167.03

side of single or half birck walls / concrete wall for interior plastering and

finished even in C M 1:4 (1 cement : 4 coarse sand) with 1 x1 cm grooves

at juction of structural members and Mala troweled finish etc. comp. For

It. No. Item of Work Qty. Unit Rate in Amount

43 Providing 15mm thick mala cement plaster in single coat on Rough (Similar) 870.00 Sqm 189.79

side of single or half birck walls / concrete wall for interior plastering and

finished even in C M 1:4 (1 cement : 4 coarse sand) with 1 x1 cm grooves

at juction of structural members and Mala troweled finish etc. comp For

44 Providing 15mm thick mala cement plaster in single coat on Rough (Similar) 172.00 Sqm 212.54

side of single or half birck walls / concrete wall for interior plastering and

finished even in C M 1:4 (1 cement : 4 coarse sand) with 1 x1 cm grooves

at juction of structural members and Mala troweled finish etc. comp. For

45 Providing 10 mm. Thick mala cement plaster in single coat for plastering on 744.00 Sqm 150.80

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) with 1 x1 cm grooves at juction of structural

members with Mala troweled finish etc. comp.Ground Floor

46 Providing 10 mm. Thick mala cement plaster in single coat for plastering on 727.00 Sqm 173.56

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) with 1 x1 cm grooves at juction of structural

members with Mala troweled finish etc. comp.First Floor

47 Providing 10 mm. Thick mala cement plaster in single coat for plastering on 29.00 Sqm 196.31

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) with 1 x1 cm grooves at juction of structural

members with Mala troweled finish etc. comp. Second Floor

48 20mm thick double coat sand faced cement gutka plaster on walls upto 1188.00 Sqm 329.29

height 10 metres above ground level consisting of 12mm thick backing coat

of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-

cement : 1-sand) including 1cm x 1cm grooves etc. complete.

49 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 168.00 Rmt 41.00

50 Applying two coats of (white cement based) or (acrylic lappy (putty)) or 15906.00 Sqm 40.59

equivalent and two coats of primer of approved brand and manufacture on

new wall surface to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. for All floor.

51 Distempeing (Two coats) with oil bound distemper of approved brand and 2016.00 Sqm 71.90

manufacture and of required shade on wall surfaces to give an even shade,

ove and including a priming coat with distemper primer of approved brand

and manufacture after thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including preparing the surface

even and sand papered smooth.

52 Distempeing (Two coats) with oil bound distemper of approved brand and 1500.00 Sqm 79.86

manufacture and of required shade on Celling to give an even shade, ove

and including a priming coat with distemper primer of approved brand and

manufacture after thoroughly brushing the surface free from mortar

dropping and other foreign matter and also including preparing the surface

even and sand papered smooth.

53 Finishing wall with Weather proof exterior acrylic emulsion paint With one 4095.00 Sqm 114.53

coat of primer on wall surface to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of loose

powdered materials.etc complete for All floor

54 Providing And filling with good quality sinder(steam coal) as directed by 93.00 Cum 586.57

engineer in charge in sunks in layers of 15 cm thick,including

watering,placing ,ramming well etc as directed, for all floor.

55 Providing and laying controlled cement concrete M-200 for RCC work and 5.00 Cum 6903.35

curing complete including the cost of form work but excluding the cost of

reinforced concrete work in coping on Ground Floor

56 Providing and laying controlled cement concrete M-200 for RCC work and 5.00 Cum 6941.73

curing complete including the cost of form work but excluding the cost of

reinforced concrete work in coping on First Floor

57 Providing and laying controlled cement concrete M-200 for RCC work and 4.00 Cum 6980.11

curing complete including the cost of form work but excluding the cost of

reinforced concrete work in coping on Second Floor

It. No. Item of Work Qty. Unit Rate in Amount

58 Providing and fixing M S angle openable grilled Single shutter Door 13.00 Sqm 2863.35

having 25 MM. x 50 MM x 6 MM size M.S. angled welded togather to make

a box frame and 20mm dia M.S. bars to be fixed with it by drilling hole in

the angle section and welded at 10 cm C/C approx including anodized iron

fixtures & fastenings including primer coat of approved quality and two

coats of oil paint etc., complet as per detail drawing as directed.

59 Providing and fixing 38 mm thick flush single door shutter, solid core with 37.00 Sqm 4707.61

Anodized Aluminium section (jindal door section no 19552-weight not less

than 1.1 kg/mt ) frame size 63.5mm x 38mm inserted Non teak wood

frame inside the aluminium section for durable grip of hinges & Double

shutter with required teakwood batten having 1mm thick lamination on

both side, Durable Grip shall be providing with both side 15cm long

stainless steel handle and necessary Locking system of Godrej, ,fixtures &

fastenings etc. directed by engineer in charge.

60 Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP 21.00 Sqm 2019.98

shutter with wood grain raised panneled design finish shutter having extra

reinforcement on sides & edges in Gel coat finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges &

fintures. The whole FRP frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are to be inclusive of

S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

61 Providing and fixing window having extruded aluminum Colour anodized 58.00 Sqm 1583.95

section frame main outer size 95mm x 24mm x 1.17mm (of Jindal Section

no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member size 92mm x

31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07 Kg/mt), vertical

member of size 92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size

mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt),

vertical member of size 40mm x 18mm x 1.29 mm (of Jindal Section

no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to fram as details etc complete.

62 Providing and fixing window having extruded aluminum Colour anodized 2.00 Sqm 1713.70

section frame main outer size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094 Kg /

Rmt, horizontal two track member size 61.85 mm x 31.75 mm x 1.20mm @

wt.of 0.695 Kg/mt, vertical member of size 61.85 mm x 31.75mm x 1.30 mm

@ wt.of 0.659 Kg/mt with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical member of size 40mm x

18mm x 1.29mm @ wt.of 0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

details etc complete

63 Providing & Fixing in position standard extruded approved colour anodized 8.00 Sqm 1859.41

Aluminum Ventilator Size as per design with outer frame 63.50 x 38.10 x

1.95 mm (of Jindal Section No.4605,@ Wt. 1.094 kg/Rmt ) with 5 mm thick

bajari figured adjustable glass louvers as shown in elevation for as per

detailed drawing as directed. For Ventilator

64 P & L 60x60 cm' (Anti Skid/Mat) vitrified 8 mm thick tile flooring over 20 mm 885.00 Sqm 1397.83

(average)base of cement mortar 1:6 (1cement : 6 coarse sand)on new

surface or fixing on existing flooring by adhesive materials including

dismentalig of existing flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning the surface etc. complete

including colour approved by directed.

65 P & L 60x60 cm (Anti Skid/Mat) vitrified 8 mm thick tile in skirting risers of 41.00 Sqm 1141.45

steps and dedo on 10 mm thick cement plaster 1:3 (1cement : 3 coarse

sand)and jointed with white cement slurry

It. No. Item of Work Qty. Unit Rate in Amount

66 Providing and laying machine cut free edge machine polished 18 to 20 56.00 Sqm 1957.38

mm thick Granite finished treads and risers in Max 270 cm length with 1cm

projecting, nozing rounded moulding in tread laid over 12 mm (av.) thick

bases of cement mortar 1:6 (1-cement : 6-coarse sand) jointed with grey or

colour cement slurry including rubbing and polishing incl. making Three

No.s of grooves of size 3mm X 3mm along the length of treads etc.

67 P & L anti skid coloured ceramic tiles 30 x 30 cm size 6 mm thick in flooring 206.00 Sqm 957.63

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush pointing in white cement

68 Providing and laying coloured glazed tiles of the size 300 mm x600 mm x 8 756.00 Sqm 1417.36

mm in skirting, risers of steps and dedo on 10 mm. thick cement plaster 1:3

(1 cement : 3 coarse sand) & jointed with white cement slurry.

69 Providing Plinth Protection to Building including excavation in ordinary soil 183.00 Sqm 2413.60

and laying cement concrete 1:3:6 using stone aggregates of 40mm nominal

size in foundation layer 125 mm thick+ 125mm thick sand layer below pre-

cast Rubber Dye inter locking concrete block 60mm thick with grade of

concrete M300 pneumatic compressed by mechanically pressed and as per

approved design including 75mm Sand layer for levelling and filling the

joint with sand in proper line and level etc. complete, Including Providing

and fixing pre-cast concrete kerb stone of grey cement based concrete

block 30cm length, 30cm height and 15cm thick made of M250 grade

concrete as per approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3 (1cement:3 fine sand) etc.

70 Providing and laying broken chine mosaic flooring for terrace using 12 mm 576.00 Sqm 747.29

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

71 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse 576.00 Sqm 330.88

sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and

finished with a floating coat of neat cement. (A) 50mm thick.

72 Providing and fixing polished 18mm thick green marble stone with full round 206.00 Sqm 1192.44

edge and polished of approved quality in clading on sill and around the

doors/ windows/ ventilation with 20 mm thick cement plaster CM (1:4) and

fixing with cement slurry & adhesive including moulding of exposed edges

as directed by engineering in charge etc. complete.

73 Providing and fixing M.S Safty Grills having 16mm round MS polished bar 133.00 sqmt 2788.41

Horizontally at every equal 0.15m C/C distance and 1 no of bar Vertically at

every equal 0.60m C/C distance Fixing on around (5x40) mm Solid MS Patti

including cutting, welding and fabrication etc; including one coat of primer of

approved quality and two coats of oil painting as per detail drawing etc.

complete as per directed Engineer in charge.

74 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of 4000.00 Litre 3.95

required capacity each with all necessary fittings and connection etc.

complete on Fifth floor.

75 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe 90.00 Rmt 195.67

( SCH- 40) for cold water including fittings make approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

76 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe 90.00 Rmt 148.12

( SCH- 40) for cold water including fittings make approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

It. No. Item of Work Qty. Unit Rate in Amount

77 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe 210.00 Rmt 91.84

( SCH- 40) for cold water including fittings make approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

78 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe 120.00 Rmt 72.65

( SCH- 40) for cold water including fittings make approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

79 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 70.00 Rmt 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

80 Providing laying (to level or slopes) and jointing reinforced concrete Light 118.00 Rmt 665.48

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of joints

complete.(D) 300mm (upto 10 ton).

81 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 90.00 Rmt 835.15

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

82 Providing, laying and jointing in true line and level 75 mm dia. UPVC 25.00 Rmt 714.07

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-1999

of approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp at every 2000 mm c/c or shall be conceled in walss as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost of

83 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 75mm 2.00 No 15.66

84 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 12.00 No 28.79

85 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 78.00 No 558.36

diameter with jali of the following nominal diameter of self cleansing design

with C.I scread down or hinged grating including the cost of cutting and

making good the walls.

86 Providing and fixing wash down water closet (European type W C pan) with 19.00 No 2602.45

integral P and S trap including jointing the trap with soil pipe in cement

mortar 1:1 (1 cement five sand) including providing and fixing plastic seat

cover for wash down WC with CP brass hinges and rubber buffers back

plastic seat and including providing and fixing PVC flushing tank with a pair

of C I or MS bracket with complete fitting such as lead valve siphon 15 mm

dia brass ball valve with polythene float CP brass handle unions and

couplings for connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in walls and making

good the same connection the flush bend with cistern and closet vitreous

china.etc completed.

87 Providing and fixing brass screw down stop tap.(A) 25mm dia. 24.00 No 220.82

88 Providing and fixing brass screw down stop tap.(A) 15mm dia. 59.00 No 205.83

It. No. Item of Work Qty. Unit Rate in Amount

89 Providing and fixing ball cock of approved. quality as directed.(A) Copper 2.00 No 189.84

Metal (ii) 50mm dia.

90 Providing and fixing washbasin with single hole for pillar tap with C.I. or 27.00 No 1890.63

M.S. brackets painted white including Rubber plug, sutting holes and

making good the same but excluding fittings and also including rate of C.P.

brass waste for washbasin or sink (A) 32mm dia. , M.I. fisher union for

washbasin or sink (A) 32mm dia ,Rubber Plug for sink and .pillar tap,

capstan head, screw down high pressure with screws, shanks and back

nuts. (i) 15mm dia.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

91 Providing and fixing Urinal of approved quality including connection with 8.00 No 1557.35

trap and with integral longitudinal flush pipe.(A) Squating plate pattern white

earthenware 550mm x 300mm.

92 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 26.00 No 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

93 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets 22.00 No 603.19

fixed to wooden plugs with C.P. brass scews (B) 600mm x 20mm size.

94 Providing and fixing screw down bib taps of following size.(A) Brass screw 48.00 No 186.83

down bib tap polished bright. (i) 15mm dia.

95 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 4.00 No 186.83

96 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 4.00 No 420.63

97 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber 5.00 No 1246.92

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight (i) Square mouth traps (B) 150mm x 100mm size P or R

98 Constructing brick masonry chamber for underground C.I. Inspection 15.00 No 2288.66

chamber and bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal

dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc. complete

(i) Inside dimensions 455mmx 610mm and 450mm deep for single pipe line.

99 Constructing brick masonry chamber for underground C.I. Inspection 10.00 No 2696.70

chamber and bends with bricks having crushing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar

1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions 500mmx 700mm and 450mm

deep for single pipe line.

100 Extra over items for every additional depth of 0.1M. of part thereof beyond 15.00 Each 242.39

450mm depth for Brick masonry chamber.(i) for 455mm x 610mm size.

101 Extra over items for every additional depth of 0.1M. of part thereof beyond 10.00 Each 264.86

450mm depth for Brick masonry chamber.(i) for 500mm x 700mm size.

102 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 114.00 Rmt 23.68

1:1 including neat cement finishing watering etc. Complete

103 Providing and fixing MS Ladder of required pattern with MS flats(30x3mm) 300.00 Kg 112.43

or round or square bars (12mm) at required spacing & with round headed

bolts and nuts or screws or welding including primer coat of approved

quality and two coats of oil paintas as directed by engineer in charge

104 Providing and fixing in position 300 mm high, 300 mm wide Engish /Gujarati 50.00 NO 707.00

letter made fron 1.0 mm thick stailess sheet as directed by Engineer-in-

charge with all necessary tools & plants etc. complete.

It. No. Item of Work Qty. Unit Rate in Amount

105 Providing and fixing polished 18 mm thick black granite with full round edge 9.00 Sqmt 2818.91

and double side polished of approved quality in between urinal and fixing

with cement slurry & adhesive including moulding of both exposed edges as

directed by engineering in charge.

106 Constructing drinking Platform of 18 mm thick Polished Black Granite 3.00 Sqmt 6475.11

having 0.45m width and 0.30m height including 25mm thick Kota stone

vertical Support at 0.60m c/c with cementing Materials / adhsives including

makeing necessary grooves in walls including with all fitting inlet and

outlet connection and all required fitting accessories etc. with all labour

material of approved quality incl. full moulded round front edge granite

strip of one side polished and jointed with grey cement slurry including

rubbing and polishing etc. complete for all floors

107 Providing and fixing 25 mm thick polished kota stone Shalve with full round 3.00 Sqmt 667.61

edge and double side polished of any required and fixing with cement slurry

& adhesive including both exposed edges cut and Smooth Finished as

directed by engineering in charge

108 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including 197.00 No 85.85

all type necessary fittings and accessory etc. completed as per directed

engineer in charge.

109 Providing and Fixing a set of wall mounted 38 mm dia U shaped horizontal 4.00 No 2671.45

stainless steel collapsible grab bar , 38mm vertical stainless steel fixed

grab rail of grade SS 304 from round pipe supported and 75 mm dia 8 mm

thick SS 304 base flange on wall including anchor fasteners, nuts,

accessories as per detailed drawing etc. complete as directed by Architect

or Engineer in charge.

110 Charges for making holes from 50mm to 160 mm dia in RCC wall, slabs or 10.00 No 858.50

any other RCC members or Brick work by diamond core cutting machine of

HILTI or equivalent including disposing the debris. For all floors .

111 Providing and fixing coloured self adhesive PU-Tactile tile, ground surface 46.00 Sqmt 5309.57

indicators of Polyurethane) of size 300mm x 300mm for guiding/warning to

the visually visitors in the centre/side of the pedestrian/approach pathway

as per specification and guidelines complete in all respect to the entire

satisfaction of in charge.

112 Providing and fixing acrylic multilingual Braille (raised dots) DIRECTIONAL 15.00 No 1964.45

SIGNBOARDS of size 225 x 150mm designed as per accessibility

standards and having 3.5mm thick acrylic base plate with Upper Case San

Serif words made of white acrylic non glare cut out letters of height 15mm

raised not less than 0.8mm above base plate and the equivalent word

written in Hindi with Devanagari non glare acrylic letters of height 15mm

raised not less than 0.8mm above base plate and having a non-glare acrylic

cut arrow pointing in the required direction. Each signboard to be fixed as

per manufacturers specifications on the wall at the approved location and at

a height of 1200mm from FFL complete as per design / specifications and

guidelines as per the entire satisfaction of the Engineer-in-charge

113 Providing and fixing of acrylic, non-glare, tactile audio pictorial building 1.00 No 50298.00

layout as per the approved size, design and make, having 3mm thick acrylic

non glare base plate of the approved colour and non-glare acrylic cut out

symbols raised 3mm above base plate and Grade 2/ Grade 1 Braille to be

integral with the sign face and be raised 0.5mm above base plate. The map

to be installed at the specified location as per accessibility standards, shall

be oriented to the position of the viewer and to be installed at a height of

800 mm from the finished ground/ floor level and using the necessary

hardware specified by the manufacturer and to be installed up to the height

of 800 mm from the finished ground/ floor level and using the necessary

hardware specified by the manufacturer and to be installed complete as per

design/specifications and guidelines as per the entire satisfaction of the the

Engineer-in-charge

It. No. Item of Work Qty. Unit Rate in Amount

114 P& F BRAILE INDICATOR OF SIZE 170 MM X 35MM FOR HANDRAILS 30.00 Rmt 951.42

OF THE APPROVED DESIGN AND MAKE HAVE BRAILE DOTS RAISED

0.5 MM ABOVE BASE PLATE TO BE INSTALLED AT SPECIFIC

LOCATIONS AS PER DIRECTION OF ENGINEER IN CHARGE

115 Providing and fixing of conspectus tape 50mm width on of treads in 86.00 Rmt 1447.33

staircase including cutting pasting etc. As per harmonised guidelines

complete in all respect to the entire satisfaction of engineer in charge.

116 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 23.00 Sqmt 1355.42

(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan

Endura Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm

thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface and

jointed with cement slurry including finished with flush pointing & cleaning

the surface for all floors as per detailed drawing etc. complete as directed

by Architect or Engineer in charge. Thse tiles shall be Anti Skid, Chemical

Resistant, Fade Proof, Frost - Heat & Weather Proof, High Flexural

Strength, Highly Durable, Stain Resistance . All Tactile Warning Tiles meet

the specific size and dimension standards as required by ISO/FDIS

117 Dismentaling tiled of stone floors laid in mortar including stacking of 640.00 Sqmt 46.77

serviceable materilas and disposal of unserviceable materials with all lead

118 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 56.00 Nos 182.94

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) not exceeding 3 Sq.M.

119 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 200.00 Rmt 73.02

and clamps including stacking the materials with all lead and lift ( for any

120 Dismantling santtary fittings like wash basin . W.C. pan Indian and 52.00 Nos 394.51

European type, flushing tank etc. including stacking the materials with all

121 Providing and fixing pillar tap, capstan head, screw down high pressure with 15.00 Nos 308.73

screws, shanks and back nuts. (i) 15mm dia.

122 Provision and fixing water closet squatting orissa type W.C. pan size 16.00 Nos 1822.04

580mm integral footrest and 100 mm P or S trap and in cluding 25 mm dia

CP brass flush valve and GI inlet connection etc. comp. (A) Vitreous china

long pattern white or color

123 Providing and fixing standared extruded of alluminium section of size 63mm 11.00 Sqmt 1175.56

x 38.10mm x 1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated

alluminium frame for ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

124 Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP 52.00 Sqmt 2377.76

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with injected fire

retardant grade polyurethene foam done in situ alongwith embedded

wooden pieces for stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings & fastener sleeve

125 Providing and fixing Urinal or approved quality including conecting the 14.00 Nos 1036.27

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat back or

corner type size 430mm x 260mm x 350mm.

It. No. Item of Work Qty. Unit Rate in Amount

126 Repairing the existing surface with minor waterproofing of Tarrace, wet 12.00 Sqmt 1975.56

areas, tanks, balconies, kitchens, and small roofs, the contractor shall:

clean the RCC slab surface and walls using mechanical tools to remove

dust, dirt, and concrete layers; perform pressure grouting at construction

joints or honeycombs using a non-shrink cementitious grout mixed with

shrinkage compensating admixture (SUNPLEX by M/s Sunanda Speciality

Coatings Pvt. Ltd. or equivalent) in a 50 kg cement bag, and sufficient water

for flowability, grouted under pressure in pre-drilled holes using a grouting

pump; after 24 hours, cut the nipples and seal them; prepare rough

surfaces at beam-slab, slab-masonry, and slab-column joints for vatta; fill

the rough surfaces with a 45-degree angle vatta using a high dose acrylic

polymer modified mortar (PMM) made with POLYALK EP, cement, and

quartz sand in a 2:5:15 ratio (by M/s Sunanda Specialty Coatings Pvt. Ltd.

or equivalent); conduct a hydrotest using the ponding method for more than

48 hours on all treated surfaces and repeat the pressure grouting step if

leakage is observed; prime the surface using an acrylic primer (SUNPRIME

by M/s Sunanda Specialty Coatings Pvt. Ltd. or equivalent) at a coverage

rate of 8-10 sq. m/kg/coat and allow it to dry; apply two coats of a single

component, highly flexible, acrylic, fiber-reinforced elastomeric coating

(SUNKOTE by M/s Sunanda Specialty Coatings Pvt. Ltd. or equivalent)

conforming to DIN 1048 at a coverage rate of 2.5-3.5 sq. m/kg/coat, with a

24-hour interval between coats, and sprinkle coarse sand over the second

coat at 100 g per sq. m while still wet and tacky to provide a mechanical

key; and finally, apply a protective layer as per the desired architectural

finish (IPS, China Mosaic, Tiles, etc.). All works must adhere to the

Department of Civil Engineering, SVNIT, Surat, and the instructions of the

Engineer-in-Charge.

127 Painting one coats (excluding priming coat) on previously painted steel and 765.00 Sqmt 55.21

other metal surface with enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

128 Steel work, riveted in built up sections framed work including cutting, 10530.00 Kg 58.19

hoisting, fixing in position and applying a priming coat of red lead paint. (A)

In beams and joists, channels angles Tees, flats, with connecting plates or

angle cleats as in main and cross beams. Hip and jack rafters, purlins

conneted to common rafters and the like.

129 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 351.00 Sqmt 858.67

mm thick pre coated GI sheet . The Precoated sheet shall be of minimum

240 mpa steel grade confirming to IS 14246:1995 and shall have zinc

coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns epoxy

primer on both side of the sheet and polyester top coat 15-18 micron. The

PPGI Sheet shall have plastic protective guard film of minimum 25 microns

to avoid scratches during transportation. The ridge shall be fixed to the

steel members by pop rivet or self drilling/self stitching fastners @

maximum 450 mm c/c along length of capping/flashing etc complete .

130 Providing average 15 mm thick single coat fiber mortar plaster by removing 25.00 Sqmt 377.74

detoriated plaster over old masonry surface scraping by wire brush,

applying 125 gm/bag "Triangle shape" polyester fiber "6 mm - long" to be

added existing wall surface including plastering in CM 1: 3 in single coat

adding 140 ml Super Plasticizer and 250 ml SBR etc complete as per

directed by Engineer - in - charge.

131 Providing average 10 mm thick in CM 1:3 in single coat polymer plaster 30.00 Sqmt 406.28

adding 140 ml Super Plasticizer and 250 ml SBR by removing the

scrapping of old detoriated plaster of any thickness from Wall/RCC

member including stacking of servicable material and disposal of

unservicable material from site of work with all lead and lift. After removing

the plaster of Wall/RCC, it shouid clean by Water Jet, Pointing will be done

in masonry joints and Bonding coat (Cement+SBR+Water) shouid apply

before poiymer plaster etc complete as per directed by Engineer - in -

It. No. Item of Work Qty. Unit Rate in Amount

132 Providing average 20 mm thick single coat polymer plaster by removing 42.00 Sqmt 339.36

detoriated plaster over RCC member, exposing existing reinforcement

including scraping by wire brush, applying rust removing chemical, rust

convertor and zinc rich primer on existing reinforcement, applying polymer

bonding agent on existing concrete surface including plastering in CM 1:

in single coat adding 140 ml Super Plasticizer and 250 ml SBR including

white washing in two coats etc complete as per directed by Engineer - in -

charge for all floors.

133 Wall painting (two coats) with plastic emulsion paint of approved brand and 7997.00 Sqmt 78.90

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

134 Wall painting (two coats) with plastic emulsion paint of approved brand and 4393.00 Sqmt 84.16

manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

135 Removing dry or oil bound distemper by a washing and scraping and sand 15297.00 Sqm 10.99

papering the wall surfacesmooth including necessary repairs to scratches

136 Providing and fixing 35 mm thick shutters for Doors, windows and clearstory 6.00 Sqm 3656.67

windows including blackenamelled M.S. butt hinges with necessary screws.

(A) Indian teak wood. (i) Fully Panelled.

Electrical Work

137 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 130.00 Pt. 449.45

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured/metallic/white front plate modules

erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. Cat-

138 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 58.00 Pt. 629.23

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator

mounted and accessories with earth continuity of following type erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Ca-III

139a Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both 10.00 Pt. 473.69

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box

covered with appropriate front plate modules erected on / in wall / ceiling as

per pipe erected with following type of accessories. [I] For 6A Plug and 6 a

switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete Ca-III

139b [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb 10.00 Pt. 697.91

db board. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete Ca-III

140 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 33.00 Pt. 241.39

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in

wall / ceiling with following type accessories. Ca-III

141a Providing following type of Modular Type Accessories mounted with PVC / 45.00 Nos. 153.52

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (8) Computer RJ-45

It. No. Item of Work Qty. Unit Rate in Amount

141b Providing following type of Modular Type Accessories mounted with PVC / 8.00 Nos. 190.89

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (10) 6/16Amp. Universal

141c Providing following type of Modular Type Accessories mounted with PVC / 8.00 Nos. 295.93

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge. (13)

6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch Ca-III

142 Providing and erecting ISI mark Medium class RIGID PVC PIPES of 1000.00 Mtr. 32.32

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed. (b)

143 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 1780.00 Mtr. 78.78

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size. (a) with medium class Rigid PVC pipe and

accessories (b) 2 wire 2.5 sq. mm

144a Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 200.00 Mtr. 107.06

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

144b Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 60.00 Mtr. 140.39

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm

144c Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI 120.00 Mtr. 248.46

marked stranded Copper conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size

(a) with medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm

145 Providing and erecting Miniature circuit breaker single pole 0.5A to 2A 37.00 Nos. 270.68

system and having breaking capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark. Ca-III

146 Supplying & erecting approved make LAN cable of following size in existing 1125.00 Mtr. 45.45

pipe as per direction.

147 Providing & erecting main Distribution (MDF) indoor type, back mounted 2.00 Nos. 1311.99

frame as per DoT standard approved with krone strips (b) Suitable for

148 Providing & erecting Switch board for Computer or electric apparatus 45.00 Nos. 1081.71

consisting of following modular type accessories mounted with PVC /

Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary

connections as directed. 1 no. 6A/16A universal plug-switch combined.

nos. 6A Switch, 3 nos. 6A 5 pin Plug [B] For Modular Type Accessories Ca-

149 Supply of Fibreglass Step Trestle (A Type) Ladder - 10 FT having following 1.00 Nos. 24480.38

specifications :- It should have heavy gauge steel hinges suitable for

industrial application ,inside Spreader Braces ,Aluminium Feet with thick

rubber tread, nonconductive Full channel Fibreglass ,two pairs of gusset

support at the bottom step and All gussets are heavy duty steel. It should

have steps on both the sides for climbing. Capacity : 300 lbs." Step Width :

4” Bottom Width : 29” Approx. Spread : 83” Approx. Wt. : 27 Kg Approx.

It. No. Item of Work Qty. Unit Rate in Amount

150a Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 16.00 Nos. 373.70

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with integral driver.(iv)

22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet Cat-III

150b Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 72.00 Nos. 535.30

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion resistance with diffuser

with company mark/name 160V to 270V, Power Factor more than 0.95,

THD < 15%,CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt

,LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Tube Light with integral driver. (v)

36 Watts, Surge-2 KV, IP-20, conventional 4 feet Ca-III

151 Supplying and erecting led lamps with following wattage capacity of 220 to 16.00 Nos. 112.11

240 voltage, minimum 15000 burning hours life, 500 V in built,

surge,protection,Polycarbonate diffuser, mounting suitable for E14 / E27 /

B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder. (ii) 8 watts

152 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 20.00 Nos. 758.51

0.5 Watt assembled on single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name 160V

to 270V,Power Factor more than 0.9, THD < 15 %, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 % (fitting

required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (A) Square/

Circular shaped Surface/Recessed Mount Downlight with provision for

spring loaded mounting clips complete.IP20(iv) 24 watts, Surge-2 KV Ca-III

153a Supplying and erecting LED street light / Flood light fittings with High power 25.00 Nos. 4997.48

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT 3000 K to

5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED

driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may select any wattage

capacity between the ranges shown.) (A) Street Light (IP-65), Surge

protection -4KV integral and ,Light must have 440VAC line supply with over-

voltage protection.Ca-III (iv) 60 watts

153b (B) Flood Light (IP-65), Surge protection -4KV integral and ,Light must 10.00 Nos. 7266.95

have 440VAC line supply with over-voltage protection. (iv) 120 watts. Ca-III

153c (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot 2.00 Nos. 4819.72

and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto

terminal block.IP 65 (b) 40 W Ca-III [2-17-2]

It. No. Item of Work Qty. Unit Rate in Amount

154 Providing and erecting Approved make Four pole moulded case circuit 8.00 Nos. 6173.12

breaker having breaking capacity ICU of 25 KA. at 415 V,having normal

current rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

155 Providing and erecting Approved make Four pole moulded case circuit 2.00 Nos. 8055.76

breaker having breaking capacity ICU of 35 KA. at 415 V. having normal

current rating 125A. with Fixed thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections, spreader tinned copper

& complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only

156 Supplying and erecting triple pole & neutral 440V / 500V panel mounting 1.25 Rn.Mt 1961.42

Copper Busbars with four equal Nos. of electrolyte bus having current r

density not more than 1.6 Amp. / sq.mm (Rated current / cross section

area) duly wrapped with colour insulating tape for phase sequence of

following current carrying capacity, erected with necessary bus bar supports

/insulators, main cable socket to each bar, erected in existing cubical panel

with necessary connections. (A) Suitable for 100 Amp. Capacity

157 Providing and erecting Miniature circuit breaker single pole 6A to 25A 88.00 Nos. 112.11

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

158 Providing & erecting 240 V MCB double pole switch for lighting Load (B 4.00 Nos. 295.93

Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing

box having following capacity (B) 40 Amp. Ca-III

159 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B 4.00 Nos. 638.32

curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b) 40 Amp. Ca-III

160a Providing and erecting Sheet Steel powder coated MCB distribution board - 4.00 Nos. 2913.85

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of

MCB to be used) suitable for (B) three phase incoming and single phase

horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel

double door (iii) 6 way

160b (A) single phase incoming and horizontal single phase outgoing. (b) sheet 2.00 Nos. 1492.78

steel double door (IP-43) (iv)12 way

161 Providing and erecting Approved make RCCBs conforming to IS: 12640 14.00 Nos. 2235.13

and having sensitivity of 30 mA and Short Circuit withstand capacity of

KA and suitable for operation on single phase 240 V,50Hz. having

characteristic of quick action & tripping with all advance feature & do not

incorporate any electronic component. for following Max. rating erected as

directed (iI) 40 Amps. DP Cat-III

162 Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron 10.00 Nos. 540.35

pipe with coupling and buch buried in specially prepared earth pit complete

with necessary 8 SWG earth wire. & For using salt and charcoal / coke as

required for pipe type earthing.

163 Supplying & erecting earth pit of minimum bore dia.150mm size approved 2.00 Nos. 4591.46

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive compound with high

charge dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test certificate)

& having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time

Necessary test report must be submitted. (a) For Electrical Installation up to

440V in normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos

It. No. Item of Work Qty. Unit Rate in Amount

164 Providing & erecting weather proof, dust & vermin proof, floor mounted front 1.00 Sq mtr 10468.65

operated indoor type cubical panel board necessary IP-42 and above

protection as per approval from engineer incharge made from 14 SWG

thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories , supporting

angles/ flats channel including cutting, bending, drilling, welding, riveting

with internal partitions & cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch gears, BUSBARS,

suitable size of inter connecting PVC copper wire / copper-aluminium strips,

rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and

rubber gasket,heavy duty end terminal connection,danger notice

board,necessary ventilation,earthing strip complete. The Panel shall be

painted with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured excluding base

beams) The panel shall be supplied with following approved manufacturers

with following size. (A) locally fabricated panel board. (i) with 350 mm depth

165 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 175.00 Mtr. 136.35

KV grade to be erected as directed of following size. (E) 3 core 2.5 Sq.

166 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 125.00 Mtr. 281.79

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables.(C) 3 1/2 core

Sq. mm ( 25 Sq.1/2 mm core)

167 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 900.00 Mtr. 124.23

/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary

clamps or in existing trench / pipe of following size of cables (b) 4 core

168 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 650.00 Mtr. 46.46

locating the fault all over the run and back filling the same and making the

surface as normal ground.

169 Providing & laying approved make Double walled corrugated pipes (DWC) 700.00 Mtr. 62.62

of polyethylene(conforming to IS 14930 II )with necessary connecting

accessories of same material at required depth in existing trench for laying

of cable. below ground / road surface for enclosing cable (A) 50 mm Outer

170 Providing and, fixing heavy duty flange type brass cable gland with rubber 74.00 Nos. 38.38

ring for PVC insulated armoured cable complete with out going tails,

insulating tape etc for following size of cables.(c) 2 to 4 core 6 Sq. mm

171 Providing and, fixing heavy duty flange type brass double compression type 8.00 Nos. 75.75

cable gland with rubber ring for PVC insulated armoured cable complete

with out going tails, insulating tape etc for following size of cables. (B) 3 &

1/2 core 35/50 Sq. Mm

172 Solder less crimping type Aluminium lugs conforming to IS suitable for cable 16.00 Nos. 20.20

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (D) 35/50 Sq.mm

173 Providing and erecting Approved make Ceiling fan with double ball bearing 58.00 Nos. 1596.81

ISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete,

canopy erected on existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

174 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe 58.00 Mtr. 108.07

down rod erected duly painted for fan complete with proper insulation

without leakage and earthing.

175 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to 58.00 Nos. 108.07

the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

176 Supplying & erecting approved make low noise decorative exhaust fan 6.00 Nos. 1366.53

having square frame ABS body with inbuilt lowers & square frame. 200mm

with 1350 RPM Cat.II Ca-II

It. No. Item of Work Qty. Unit Rate in Amount

177 Providing recess in wall or window frame suitable for erection of Exhaust 6.00 Nos. 189.88

fan complete with plastering and colour washing to match the colour of the

wall or window complete with expanded metal in order to render the fitting in

accessible and the room water-proof.

178 Supplying and erecting approved make Octagonal pole made from HR 25.00 Nos. 6874.06

sheet steel. The pole should be made as per IS. and shall be coated with

hot dip galvanizing as per IS 2629/2633/4759, suitable suspend local wind

speed with integral Junction box consist of terminal plate of min 6mm Hylam

sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

requirement. (C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long J-Bolt.Approx Pole weight 46 kg

179 Supplying and erecting Street light pole bracket comprising main B Class GI 25.00 Nos. 450.46

pipe of 4.2 cm/require outside dia. complete with suitable B Class G.I.

sleeve tubing of approx. 45cms.length and suitable for

76.5mm/80mm/require size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with check nut

complete painted with one coat.of Red oxide / PU base primer and two

coats of Aluminium / PU paint. paint with following nos of arms. [A] Single

Arm bracket 0.5 Mtr

180 Supplying & erecting approved make SMC press moulded composite 12.00 Nos. 476.72

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged doors

as per requirement having locking arrangements with mounting clamp with

nuts, bolts & washers suitable for erection on pole with cable clamps& earth

bolt of following size of box. (c)150mm x 125mm x 100mm [deep]

181 Providing and erecting Inverter based approved make split air-conditioning 8.00 Nos. 46950.86

unit consisting of condensing unit with variable speed fan motor, inverter

type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its

accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for (cost includes Eco Friendly green gas

charging and 15A plug top & Remote Control & MS Stand) with necessary

core cutting. (1) For 3 Star Rating of current year ((C) for 1.7 to 2 ton

capacity - Premium Cat.

182 Supplying and erecting insulated pair of soft copper tubing open or 40.00 Rmt. 822.14

concealed including power and control cable,necessary PVC drain pipes

for Split AC machine up to 4 TR capacity

183 Providing & erecting water cooler having storage capacity 150 Ltr. & cooling 2.00 Nos. 46648.87

capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of

the water should drop by 15˚C within a hour, The water cooler should be

comprising of hermetically sealed compressor, fan motor, condensing unit,

water tank surrounded by evaporating, coil, thermostats, relay etc.complete

with necessary inlet & outlet connection. The body of water cooler will be

made from Stainless Steel.

184 Supplying & erecting reverse osmosis (RO) water purification system with 2.00 Nos. 65052.08

M.S. powder coated pedestal frame, prefilter housing carbon filter suitable

buster DC pump, auto low & high pressure switches with following size of

LPH capacity & erected as directed with one year comprehensive

maintenance guarantee. [D] 100 LPH with 3 phase Raw water pump of

500LPH @ 2.5kg/cm2 - (1N0 - Kirloskar /CRI/Lubi), Dual media filter

10"x54" - (1 No), Micron cartridge filter 20" x 2.5" ( 1No), High pressure

pump 500LPH @ 10kg/cm2 - (1No - Shimge /CRI /Lubi), RO Membrane

housing with RO membrane of 40*40 - (1No), RO pressure tube 4" x 1E - (

1No), 0 - 1200LPH Rotameter -(2 Nos), with Recovery Rate 50%.

185 Supplying and erecting approved make panel mounting type Digital 2.00 Nos. 1275.63

Voltmeter having 3 digits LED display, 0 to 750 AC Volts range erected on

existing panel board with all connection, wiring etc .with manufacturers

calibration certificate.

It. No. Item of Work Qty. Unit Rate in Amount

186 Supplying and erecting approved make panel mounting type Digital 2.00 Nos. 1558.43

Ammeter having 3 digits LED display, external CT operated, calibrated for

0 to 1000 Amps suitable to operate on 500 Volt AC , erected on existing

panel board with all connection, wiring etc. with manufacturers calibration

187 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase 4.00 Nos. 317.14

AC Supply 500 V on existing panel board with necessary connections.

188 Supplying and erecting approved make suitable panel indicator LED type 6.00 Nos. 43.43

lamp, lens cover, complete erected with necessary connections.

189 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 6.00 Nos. 274.72

1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with

insulating materials connected to the meter.

Rupees Two Crore Sixty Eight Lakh(s) Seventy Two Thousand Three Hundred Nineteen And Paise Twenty Only

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Credit Value of Dismentalled Materials of Amount Rs. 48631.00 shall be recovered from the 1st Running Bill of

the Contractor.

2. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

3. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4. GST and Income tax TDS will be deducted at a source while making payments of bills.

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change

as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original

item at the rate of input rate mentioned in all the tender.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and found

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Ankleshwar Sub Division, Bharuch (R & B) Division, Bharuch (R & B) Division,

Ankleshwar Bharuch Bharuch