SPECIAL REPAIRS TO BLDG NO T-32 (OR ISO WARD) AT MH RAMGARH CANTT

Amount

Dismantling AC/ CGI sheets ( corrugated, semi corrugated etc), as in roof covering complete all as specified and directed..

Dismantling of roof trusses, purlin, rails fastening, etc, of steel section complete all as specified and directed..

M&L for MS flat (wind tie) for securing roof sheet including distance pieces, cleats etc including all necessary drilling , bolting or rivetting , etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Rolled mild steel in roof trusses, ( framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing ( Beam, tee,angle,channel or flat sections ) including distance pieces , cleats etc. Fe-410W grade A complete all as specified.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/ cladding to wall, Chhajja, etc fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks complete all as specified and directed.

Roughening surface of old concrete floor by picking sweeping cleaning and washing down with water to remove dust etc complete all as specified & directed .

Brushing neat cement slurry @ 3.0 kg of cement per sqm complete all as specified & directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc laid over and including 15mm thick screed bed in CM 1:4, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in, skirting, dado, etc incl 10mm thick rendering in CM 1:3, set & jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L coloured ceramic glazed tiles 375x250x7mm/ 450x300x7mm thick as in dado/skirting etc including 10 mm thick rendering in CM 1:3, set & jointed in neat cement slurry & pointed in white or coloured cement slurry & pointed in white or coloured cement complete all as specified and directed.

M&L 18-20mm thick machine cut Kota stone slab flooring with marble stone strips/ slab/ tiles as per design approved, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to give granite finish over and including 20 mm thick screeding in CM 1:4 complete all as specified.

M&L machine cut Kota stone 18-20 mm thick in riser of steps,skirting over 15mm thick cement plaster in cm (1:4) laid and jointed with gray cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed

M&L Cement concrete 1:2:4, type B-1 (using 12.5 mm graded stone aggregate) as in levelling course, coping, window cill etc complete all as specified and directed

Demoliton of cement concrete (unreinforced) in ground floor paving n exc 15cm thickness ( below or above ground level ) complete all as specified and directed

M&L 75mm thick PCC 1:3:6 type C-2 using 20mm graded stone aggregate as in plinth protection, finishing the surface even & smooth without using extra cement laid in bays with construction joints complete all as specified and directed .

M&L for antifungal Chequered cement concrete tiles 30cm x 30cm x 22 to 25mm thick with grey cement and pigment, laid over & including 20mm thick screed bed in CM 1:6, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed

Taking down cement plaster on wall of any description incl racking out joints, hacking for key and scrubbing down with water complete all as specified and directed

Demolition of brick work build in cement mortar including all quoins, arches, pillars, complete all as specified and directed

M & L Brick work with old size sub class ‘B’ bricks, straight or curved on plan exc. 6m means radius, built in CM 1:6 complete all as specified and as directed

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 , surfaces finished even and smooth without using extra cement complete all as specified

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:4 , surfaces finished even and smooth without using extra cement complete all as specified

M&L Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc complete all as specified and as directed

Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets complete all as specified and as directed

M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm, weighing not less than 0.24 kg/RM and 23.5mmX36.4mmX1.4mm weighing not less than 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing not less than 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 4mmdia MS wire, J bolts, nuts and washers as per manufacturer's complete all as specified.

M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and as directed

Demolition of cement concrete reinforced as in chullah hoods , shelves and plate form etc complete all as specified and directed

M&L for RCC as in kitchen platform, shelves, cover slab type BO 1:2:4 (using 12.5 mm graded stone aggregate) including necessary form work complete all as specified and directed.

M&L Mild steel deformed or twisted bars ( TMT) 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. or higher complete all as specified.

M&L marble work of any shade 16 to 18mm thick in cooking platform, steps, windowcills, etc over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab incl rounding of slab & demolition of old slab where directed complete.

S&F in repair 1000 Ltrs capacity rotational moulded polythene water storage tanks in two layer cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I complete all as specified and directed.

S&F PVC ball valve 20mm dia with epoxy coateed aluminium rod and high density ball (minium weight 210 gms) complete as directed .

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal of store, 20 mm bore all as specified.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

M&L 20 mm nominal bore Mild steel galvanised water tubing , medium grade , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore including new fittings complete all as specified

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore including new fittings complete all as specified

S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed

S&F in repairs stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed

S & F in repair, 15mm bore stop valve cast copper alloy, fancy type chromium plated with long shank and cup (concealed) screwed down,high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered "Hot or Cold" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed

S&F in repair Brass chromium plated shower rose 125mm size fancy type with or without swelves joint fixed to iron pipe etc complete all as specified and directed

S&F in repair Vitreous china wash down water closet pan ( pedestal pattern), white (excluding fixing bolt, flushing cistern and flush pipe) but including P or S trap, sheet cover of white colour all as directed and specified.

S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete all as directed and specified.

S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets,waste coupling, waste pipe incl cutting for and pinning in ends of brackets or erecting stand etc complete all as directed and specified.

Supply and fix shelf 450mm long of PTMT fixed with and incl chromium plated brass screws and wooden /plastic cleats (minimum weight 300 grams) complete all as directed and specified.

S&F in repair PVC connection 450mm long with two PTMT nuts complete all as directed and specified.

S&F CP towel rail, 20mm dia, D type, 60cm long complete all as approved and directed.

S&F in repair of 10 ltr capacity PVC valveless, syphonic action type flushing cistern low level (dual flush), white, with inlet ball valve, float and handle including MS bracket complete and 32mm flush pipe of polyethylene complete all as sprcified and as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen with plugs, washers, waste coupling, waste pipe incl bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as directed and specifed .

S&F in repair 0.63mm thick kitchen plate Rack made of stainless steel 600x750x220mm size fixing with wooden plug with suitable size of screws complete all as directed and specifed .

S&F in repair harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

S & F brass CP bracket fancy type suitable for fixing to 20mm dia curtain rod complete all as spd and directed by Engr-In- Charge

Taking down Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) complete all as specified.

Taking down wooden chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters ( without taking off shutters from the frames) complete all as specified.

Refixing shutters of any description exc 1 sq.m and n exc 2 sq.m each in the same opening complete all as specified.( Note :- Refixing includes taking down of shutters also)

S & F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebates on the solid, rounded or chamfered put together with glue pinned at joints supplied and fixed.

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long on each leaf complete with glazing bars, dovetailed or welded complete all as specified.

S&F steel windows with side hung shutters incl projecting type hinges with one no MS flat iron 25x3 mm of appx 200mm length and two nos MS Tower bolt 150mm long on each leaf complete without glazing bars, dovetailed or welded complete all as specified.

S&F framed work such as grills gratings etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron doors, ladders framed, baluster walk ways, railings, framework of water tanks & similar wk conforming to Fe410-0 or Fe310-0 complete all as specified.

S & F 35mm thick 2nd class hardwood glazed and skeleton shutters divided into squares with plain, chamfered or rounded, mitred & rebated sash bars and prepared to receive glass, gauze etc edges of framing plain chamfered or rounded fitted with cat and mitred beads for securing glass etc fitted to chowkats for doors, etc complete, size of member of shutter as specified in SSR Part -I, Sec 8, clause 8.20 (b). Sample of shutter can be seen in GE's office.

M & L cement concrete type C - 1 (1:3:6) using 20 mm graded stone aggregate as in bed blocks,fillings for holdfast etc complete all as specified and directed.

M&L mild steel Bands, straps, supports or stays for rainwater , fan clamps Ventilating pipes, including bolts , if required; hooks ( stay), heavy, for large gates; hook and pintol hanges; large hasps and staples ; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters ; knee piece inserts; two way and three ways straps , plate washers and similar small articles conforming to Fe-290 Gde -E-165 complete all as specified.

S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame wealded/sealed to the stiles & rails with sutable PVC sheet beading and jointed togeather with solvent cement, fix in frame complete all as specified and directed..

S&F in repair 12mm thick pre-laminated particle board interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cupboard shutter, shelf, etc complete all as specified and directed.

S & F 100 mm size Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S & F Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed.

S & F Aluminium anodised handles of extruded section and fixed 125 mm long complete all as specified and directed.

S&F small fitings of 2nd class hard wood such as brackets of any type, latch and hing block shape door, window stops and the like incl all necessary labours articles not exc 200 cucm each complete all as specified and directed.

S & F 300 mm long mild steel sliding door bolt with hasp, staple( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections and fixed complete all as specified and directed.

MS ordinary rat tail rod pattern springs 150mm, including roller and roller plate complete all as specified and directed.

M&L 125mm long hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks etc complete all as spd.

S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane complete all as specified and directed.

M&L for preparation of new plastered wall surface applying one or more coat of Wall Care Putty to make the entire surface free from undulations all as specified and directed

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed.

M & L two coats of oil bound distemper on newly prepared puttied surfaces Complete all as specified and directed.

M&L three coat of white wash on newly prepared surfaces on wall , etc complete all as specified and directed.

M&L one coat of white wash on newly prepared surfaces on wall , etc complete all as specified and directed.

M/L preparation of new wooden surface any description over 10 cm width or girth and applying two coat synthetic enamel paint over a coat pink primer all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

M & L preparation of old painted steel surfaces any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed.

S&F in reapir, PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.

S&F in reapirs, PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and as directed.

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete all as specified and as directed.

M&L PVC (SWR) bend of 110mm dia of any radius etc complete all as specified and directed

S&F PVC (SWR) bends any radius of 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc. to be measured separately), removing materials to store for keeping in safe custody for reuse at site and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed

M & L for point wiring for one light/ fan point/call bell controlled by one switch with 1100 volt grade PVC insulated FRLS 1.5 Sq mm multi stranded copper conductor cable with continuous earth wire of 1.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed, drawn in & including concealed rigid non metallic PVC conduit medium grade with fittings (ISI marked) not less than 20 mm dia & sunken anodized pressed sunken boxes made out of not less than 1.0 mm thick sheet, covered with 2.8 mm thick laminated insulated cover make sheet for housing/fixing switches etc complete all as specified and directed.

Description all as per item No 97 above but 1.5 Sq mm for 5 Amp socket outlet on same board with 1.5 Sq mm earth wire complete all as specified and directed.

Description all as per item No 97 above but PVC insulated FRLS 2.5 Sq mm multi stranded copper conductor cable for 15 Amp switch socket combination on independent board with 2.5 Sq mm multi stranded copper conductor cable PVC insulated-unsheathed earth wire complete all as specified and directed.

S& F switch piano type 5 Amp 230 volt one way flush type complete all as specified and as directed.

Supply and fix ceiling rose three terminals PVC/ Polycarbonate, isolated body complete all as specified.

S&F socket outlet 3/5pin 5 Amp flush type 230 volt complete all as specified.

S&F switch socket combination 2 in 1, 6 pin 5 Amp and 15 Amp flush type universal 230 volt complete all as specified.

S & F angle holder complete all as specified and as directed.

S&F LED Bulb 9W complete all as specified and as directed.

S&F call bell Ding dong, AC 230 volts, single pole complete all as specified and as directed.

S&F bell push flush type 5 amp AC 230 volts, single pole complete all as specified and as directed.

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves as approved by the GE

S&F Electronic fan regulator for ceiling fan of sweep 1200/1400 mm 0-4 stepped type 240 volts ,200/300 watt flush mounted complete all as specified and directed

S&F sheet metal enclosures for DBs single pole & neutral 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

S&F sheet metal enclosures for DBs TPN 4 way double door with 200 Amp rated bus bar suitable to accommodate MCB and necessary electric cable connection through suitable lugs by crimping and making good disturbed area of wall complete all as specified & as directed.

Supply and fix 4 pole MCCB 12 to 63 Amp, 50Hz 415 V with rupturing capcity 25 KA all as specified & as directed.

S&F MCB single pole 6 to 32 Amp 240 V, ‘B’ Series, 10 KA, complete all as specified and as directed.

S&F MCB SPN, 20A 240V, ‘B’ Series, 10 KA complete all as specified and as directed.

M&L ,for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts check nuts & washers of galvanised iron or steel, protected by GI pipe 15 mm bore (light grade) and watering pipe 20 mm bore GI pipe (light grade) and PCC of chamber and coping shall in 1:3:6 type C-1 using 20 mm graded stone aggregate including excavation and earth work and removal of surplus soil and filling with black cotton soil upto ground level complete all as shown in electrical plate No 3 of SSR Pt-I, 2009 with CI cover 10mm thick of size 300x300mm with charcoal dust and common salt complete and earth lead connected to panel including testing complete all as specified and directed. Note : Earth test result should not less than one ohm.

M &L Wiring for circuit/sub main wiring alongwith earth wire with the following sizes of2x6.0 Sqmm + 1x4.0 Sqmm earth wire FR PVC insulated copper conductor, single core cable in surface/ recessed as required

M/S Kunwar Construction

M/S SAI CONSTRUCTION