Malappuram Package No. 3 - Supply and Construction of 11 kV Lines using HT ABC for the Development of Distribution Infrastructure on a Turnkey Basis under the Dyuthi Special Scheme at Various Locations under the EC, Manjeri (Re-tender/2nd Invitation)

Pole PSC 9 M

Aerial Bunched Cable HT 3x150 + 1x120 sq.mm (Insulated Messenger)

Anchoring /Dead end Clamp Assembly for HT AB Cables up to 150 sq.mm (Insulated messanger 95 to 120 sq mm)

Suspension Clamp Assembly for HT AB Cables up to 150 sq.mm

Stainless Steel Strap [20 mm x 0.7 mm]

Stainless Steel Buckle Slot width 20.5 mm x 1.5 mm,Thickness 1.2 mm.

MVT Kit for HT ABC (3 Nos)

Heat Shrinkable Termination Kit (3 Nos) for 120 Sq.mm Three phase HT Aerial Bunched Cable

Channel cross arm -75x40x6mm 1.8M

Air Break Switch (AB Switch) 11kV 400 A , Composite Polymer Housing

CROSS ARM GI CHANNEL 4 LINE (4 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

CROSS ARM GI CHANNEL 2 LINE (2 Line Channel Cross Arm) with Clamp, Bolt & Nut for PSC Pole 8M/200kg

GI Wire 8 SWG

Bolt&Nut GI with washers of various sizes

Earthing Coil GI 115 Turns 50 mm internal Dia dia

Ferrules 5 Sq.mm(GI)

Pipe GI 40 mm dia -2.5 m Length( Earth Pipe)

Earth Chamber (PVC) With RCC Covering Slab

Crimping Socket Palm Type 50 Sq.mm -Al(Cable Lug)

Stay Insulator Porcelain 11k V

Anchor Plate 200 x 200 x 8 mm GI (HT Stay Plate GI))

Turn Buckle ,Eye bolt with 2 Nuts 20 mm dia -GI(Stay tightner HT)

Stay Wire 7/8 (7/3.15mm) GI (HT Stay Wire)

Stay Rod (Anchor Rod) GI 20 mm dia (HT Stay Rod)

Helically formed Guy-Grip HT

Thimble GI 75 mm x 22 mm x 40 mm ,1.5 mm Thickness (For HT and LT)

Clamp GI For HT Stay/Strut

Composite polymeric pin insulator with pin 1.1 kV

Channel cross arm GI 100 x 50 x 6 mm 2.4 mt

Lightning Arrester 9 kV,10 KA (Distribution class) Composite Polymer Housing

Clamp for HT Cross arm

Stainless Steel Buckle Slot width 10.5 mm x 1.5 mm,Thickness 1.2 mm.

Pole A Type GI 11 M

Heat Shrinkable Termination Kit (3 Nos) for 150 Sq.mm Three phase HT Aerial Bunched Cable

SHACKLE INSULATOR 415V SET(WITH STRAP BOLT&NUT)

Pole A Type GI 12 M

Aerial Bunched Cable HT 3x120 + 1x95 sq.mm (Insulated Messenger)

Pole A Type GI 13 M

Channel cross arm GI 100 x 50 x 6 mm - 3 mt

Crimping Socket Palm Type 150 Sq.mm -Al (Cable Lug)

Cable Tie UV Plastic Heavy Duty 250 mm Length

Stainless steel Buckles [20.5 mm x 1.5 mm; thickness 1.2 mm]

Crimping Socket Palm Type 120 Sq.mm -Al (Cable Lug)

Item Wise BoQ

BoQ_Ver3.0

Malappuram Package No. 3 – Supply and Construction of 11 kV Lines using HT ABC for the Development of Distribution Infrastructure on a Turnkey Basis under the Dyuthi Special Scheme at Various Locations under the Electrical Circle, Manjeri

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Fitting and erecting one HT PSC Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Doing one cable end termination on HT ABC of sizes Up to 3x150+1x120 sqmm

Erection of suspension clamp for 11KV ABC of any size

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Fitting one set AB switch and giving connection

Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Providing one Earth using earth pipe incl. digging & backfilling pit and supply of charcoal, salt, sand etc.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Fitting one Additional 2.4m/3m Channel cross arm (75x40x6mm), in existing 11kV DP incl. conveyance of materials.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT Line.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Traffic signal painting of pole 1.5m height using black and white paints in alternate rings of 25cm width incl. cost of paint as specified.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting.

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Additional rate for excavation of Pit for A type pole in Laterite.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Soft Rock.

Stringing of 11 kV Aerial bunched cable of size 3 x 150 + 1 x 120 sqmm with bare/insulated Messenger through existing poles

Fitting and erecting one HT A type Pole in position incl. fitting cross arm, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Fiting One no MVT on existing cross arm excluding termination work (for One phase) of any rating for 11 kV AB Cable

Dismantling (without damage) LT stay incl. digging pit in all classes of soil and backfilling

Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11kV DP incl. conveyance of materials.

Fitting and providing one Strut using A type pole incl. digging & back filling pit.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.

Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Rock.

Additional rate for excavation of Pit for A type pole in Soft Rock.

Erection of LT 3 way distribution box on existing cross arm giving connection incl. cable and earth connection (excluding earthing).

Additional rate for excavation of Pit for A type pole in Rock.

Fitting and providing one HT Fly stay for 11kV pole using A type pole incl. digging & back filling pits.

Dismantling one damaged 11kV TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged HT PSC/RCC Strut pole incl. removal of clamps and stacking.

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Renewal of existing damaged/old 11kV PSC/RCC Pole with new A type pole in place and refitting of all items incl. conveyance (except pole).

Renewal of existing damaged/old 11kV PSC/RCC Pole with new PSC pole in place and refitting of all items incl. conveyance (except pole).

Additional rate for refitting/redoing one Disc set while renewing any type of 11kV cut pole

Fitting one Additional V cross arm in existing single pole incl. conveyance of materials.

Straightening one slanted 11kV pole after unbinding the line and rebinding the line after work.

Straightening one slanted 11kV Cut pole after lowering down the existing line and stringing the line after work.

Fitting one additional HT pin with insulator

Reshackling one span LT Sph 2 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Reshackling one span LT 3ph 4 wire OH line, replacing insulators, tightening stay, cutting tree branches incl. conveyance.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Item Rate BoQ

BoQ_Ver3.0

Malappuram Package No. 3 – Supply and Construction of 11 kV Lines using HT ABC for the Development of Distribution Infrastructure on a Turnkey Basis under the Dyuthi Special Scheme at Various Locations under the Electrical Circle, Manjeri

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

TOTAL BOQ1 (Materials( Total Ex-work price of Materials + Total Transportation cost ) excluding GST.)

TOTAL BOQ2 (Installation / Erection Charges (Excluding GST)

TOTAL AMOUNT [1+2] (Excluding GST)

Discount offerred by Bidder(If any)

BOQ 3: TOTAL excluding GST [3 - 4]

Grand Total including GST (5+ GST Amount of BOQ1+GST Amount of BOQ2 )

Please Enable Macros to View BoQ information